Results 51 to 60 of about 2,919 (265)

Nd:YAG‐Laser Welding with Dynamic Beam Forming [PDF]

Laser Technik Journal, 2010
AbstractFuel processor / fuel cell systems for mobile applications are expected to be future mass products. Therefore, fabrication techniques are required, which can cope with high volume production at competitive pricing. Finally, the stainless steel or aluminium reactors and heat‐exchangers will be sealed by automated procedures such as laser welding,
Thomas Klotzbücher, Torsten Braune, Alfred G. Arlt, Gunther Kolb   +3 more
openaire   +1 more source

Resistance Rapid Heating of Aluminum Coatings in an Extreme High Vacuum–Adequate Atmosphere for Hot Stamping

Advanced Engineering Materials, EarlyView.
The subject of this work is the development of a corrosion‐protective coating on steel sheets for form hardening. Rapid heating in an extreme high vacuum (XHV)‐adequate atmosphere is a useful method to prevent oxidation during alloying of 22MnB5 and aluminum to obtain a metallurgical bonding.
Lorenz Albracht, Alexander Schnettger, Ulrich Holländer, Sven Hübner, Bernd‐Arno Behrens, Hans Jürgen Maier   +5 more
wiley   +1 more source

Study on connection and properties of green assembled building steel structures

Results in Physics, 2019
In order to meet the research and industrialization application needs of green building integration technology and key technology of green building envelope structure in affordable housing projects, the effects of laser power and welding speed on the ...
Junyan Dong, Tiantian Zhang, Yupi Fu, Boming Zheng, Yusheng Chai   +4 more
doaj   +1 more source

Surface Tension Measurement of Ti‐6Al‐4V by Falling Droplet Method in Oxygen‐Free Atmosphere

Advanced Engineering Materials, EarlyView.
In this article, the temperature‐dependent surface tension of free falling, oscillating Ti‐6Al‐4V droplets is investigated in both argon and monosilane doped, oxygen‐free atmosphere. Droplet temperature and oscillation are captured with one single high‐speed camera, and the surface tension is calculated with Rayleigh's formula.
Johannes May, Finn‐Lennard Janthur, Lena Kreie, Michael Müller, Sarah Seffer, Nick Schwarz, Jörg Hermsdorf, Thomas Hassel, Stefan Kaierle, Ludger Overmeyer   +9 more
wiley   +1 more source

Double pulse gas metal arc welding process parameter optimization and weld performance analysis based on response surface method

Materials Research Express, 2023
Double pulse gas metal arc welding (DP-GMAW) is a low-frequency modulated high-frequency pulse welding, which can fully stir the molten pool, and improve the forming and performance of the weld. In this study, a mathematical model was developed using the
Kun Bin, Ping Yao, Min Xu, Qian Lin, Yuqing Gu   +4 more
doaj   +1 more source

Affecting the Properties of Copper–Graphene Electroconductive Composite by Severe Plastic Deformation

Advanced Engineering Materials, EarlyView.
Copper‐based composites enhanced with carbon feature convenient mechanical properties and favorable electric conductivity. Processing via deformation and thermomechanical treatments can introduce advantageous microstructures further enhancing their performance. Herein, copper–graphene powder‐based composites are directly consolidated via rotary swaging
Radim Kocich, Lenka Kunčická, Pavel Czernek, Zifan Wang   +3 more
wiley   +1 more source

Rapid Sintering of Porous Organic Polymer Powders Into Mechanically Strong Monoliths for Efficient CO2 Capture

Advanced Functional Materials, EarlyView.
Spark plasma sintering enables rapid processing of porous organic polymer (POP) from fine powders to a freestanding and mechanically robust monolith. The sintering process retains the CO2 adsorption capacity and CO2/N2 selectivity, making the monolith more suitable as a solid sorbent for practical carbon capture applications.
Duan Li, Tianhui Shi, Sirui Ran, Lei Zeng, Chao Xu   +4 more
wiley   +1 more source

An Analysis of the Weldability of Ductile Cast Iron Using Inconel 625 for the Root Weld and Electrodes Coated in 97.6% Nickel for the Filler Welds

Metals, 2016
This article examines the weldability of ductile cast iron when the root weld is applied with a tungsten inert gas (TIG) welding process employing an Inconel 625 source rod, and when the filler welds are applied with electrodes coated with 97.6% Ni.
Francisco-Javier Cárcel-Carrasco, Miguel-Angel Pérez-Puig, Manuel Pascual-Guillamón, Rafael Pascual-Martínez   +3 more
doaj   +1 more source

In Situ Study of Resistive Switching in a Nitride‐Based Memristive Device

Advanced Functional Materials, EarlyView.
In situ TEM biasing experiment demonstrates the volatile I‐V characteristic of MIM lamella device. In situ STEM‐EELS Ti L2/L3 ratio maps provide direct evidence of the oxygen vacancies migrations under positive/negative electrical bias, which is critical for revealing the RS mechanism for the MIM lamella device.
Di Zhang, Rohan Dhall, Matthew M. Schneider, Cun Li, Chengyu Song, Sundar Kunwar, Hongyi Dou, Natanii R. Yazzie, Henry Tran, Daniel Appuing, Jim Ciston, Nicholas G. Cucciniello, Pinku Roy, Michael T. Pettes, John Watt, Winson Kuo, Haiyan Wang, Ye Cao, Rodney J. McCabe, Aiping Chen   +19 more
wiley   +1 more source

Electroactive Liquid Crystal Elastomers as Soft Actuators

Advanced Functional Materials, EarlyView.
Electroactive liquid crystal elastomers (eLCEs) can be actuated via electromechanical, electrochemical, or electrothermal effects. a) Electromechanical effects include Maxwell stress, electrostriction, and the electroclinic effect. b) Electrochemical effects arise from electrode redox reactions.
Yakui Deng, Min‐Hui Li
wiley   +1 more source