Results 111 to 120 of about 398 (208)

Tailoring Laser Powder Bed Fusion and Post‐Processing Parameters for JIS SKD61 Tool Steels: Surface Roughness, Microstructure, and Mechanical Properties

steel research international, EarlyView.
Laser powder bed fusion of JIS SKD61 tool steel is systematically optimized using a Taguchi design and ANOVA. Hatch spacing and layer thickness are identified as dominant parameters controlling surface roughness and tensile strength. Subsequent tempering at 600°C improves microstructural stability and mechanical performance, enabling high‐density SKD61
Masrurotin Masrurotin, Andi Ard Maidhah, Maziar Ramezani, Wojciech Macek, Cho‐Pei Jiang   +4 more
wiley   +1 more source

Microstructure Characterization of Bending Effects in 304L Stainless Steel Cladded with Low‐Alloy Steel Weld

steel research international, EarlyView.
Prebending of 304L/Q345R cladded plates significantly alters the subsequent weld thermal cycle and modifies the local interfacial microstructure. Combined electron backscatter diffraction (EBSD) and microscopy analysis demonstrates that deformation twinning, martensitic transformation, and defect initiation are concentrated at the trimaterial junction,
Ali Fahem, Elsiddig Elmukashfi, Hong Dong   +2 more
wiley   +1 more source

Insights Into Paint‐Bake Toughening of Resistance Spot Welds of a 2.0 GPa Warm‐Stamped Medium‐Mn Steel

steel research international, EarlyView.
Paint baking of resistance spot welded joints of 2.0 GPa warm‐stamped medium‐Mn steel activates low‐temperature tempering, forming fine cementite in the fusion zone and enhancing toughness. Crack propagation resistance increases, shifting the failure mode from partial interfacial to complete pullout, with peak load and energy absorption rising ...
Sunusi Marwana Manladan, Savyasachi Nellikode, YeoJin Jang, Sumin Lee, Dileep Chandran Ramachandran, Sung‐bo Heo, Jinyoung Lee, Young‐Kook Lee, Yeong‐Do Park   +8 more
wiley   +1 more source

Experimental and theoretical investigation of longitudinal tunnel lining joints with confining reinforcement

Structural Concrete, EarlyView.
Abstract Precast reinforced concrete segmental linings are frequently used in modern tunneling. In these linings, the longitudinal joints typically have a reduced contact cross‐section and thus often govern the design, particularly in tunnels under high hydrostatic pressure or crossing squeezing or swelling ground with correspondingly high ...
Fabian Morger, Albin Kenel, Walter Kaufmann   +2 more
wiley   +1 more source

Moment‐curvature behavior of continuous reinforced concrete slab strips—Experimental determination and modeling

Structural Concrete, EarlyView.
Abstract With the market introduction of new reinforcing materials, such as corrosion‐resistant steel, the effect of their stress–strain relationship on the ductility of reinforced concrete structures needs to be evaluated. Their moment‐curvature behavior significantly influences bending moment redistributions, rotation capacity, and deformation at ...
Nathalie Reckinger, Karel Thoma, Walter Kaufmann   +2 more
wiley   +1 more source

Optimization of mechanical properties and microstructure characterization of resistance spot welded martensitic stainless steel: in-situ tempering and TLBO approach. [PDF]

Sci Rep
Gurav V, Shrivastava D.
europepmc   +1 more source

Structural capacity of precast concrete walls with openings: A parametric study on connection types and reinforcement ratios

Structural Concrete, EarlyView.
Abstract The structural role of precast concrete walls with openings is often overlooked in design practice due to concerns about reduced stiffness, stress concentration, cracking around openings, and potential unexpected failure modes under seismic loading.
Gonçalo Marreneca, Ricardo do Carmo, André Furtado   +2 more
wiley   +1 more source

Surface Microstructure Regulation via Femtosecond Laser for Enhancing Laser Welding Strength of PVC/PA66: Mechanisms and Optimal Parameters. [PDF]

Polymers (Basel)
Zhai K, Yang F, Lin Y, Liu M, Ouyang D, Chen Y, Zhao J, Lue Q, Ruan S.   +8 more
europepmc   +1 more source

Multifunctional and Recyclable Bio‐Based Vitrimers With Tunable Properties for Sustainable Digital Light Processing 4D Printing

SusMat, EarlyView.
A bio‐based, photocurable vitrimer system is developed for sustainable digital light processing (DLP) 4D printing. The material exhibits tunable thermomechanical properties, shapes memory and reconfigurability, and supports repair, reprocessing, and reprinting through dynamic covalent bond exchange, offering a recyclable and multifunctional platform ...
Yunmi Chae, Yeongseo Gwon, Woohwa Lee, Chang‐Geun Chae, Hyun Kim, Du Yeol Ryu, Yong Seok Kim, Dong‐Gyun Kim, Sungmin Park   +8 more
wiley   +1 more source

Advancing Defect Detection in Laser Welding: A Machine Learning Approach Based on Spatter Feature Analysis. [PDF]

Sensors (Basel)
Solovev G, Klokov E, Krasnov D, Sokolov M.   +3 more
europepmc   +1 more source