Results 61 to 70 of about 3,020 (201)
Optimization of Wood Welding Parameters for Australian Hardwood Species
BioResources, 2016 Optimal linear wood welding parameters along the end-grain-to-end-grain faces were determined for Eucalyptus saligna, Eucalyptus pilularis, and Corymbia maculata. Joints made using Eucalyptus saligna showed a significant interaction between welding time (
Benoit Belleville +3 more
doaj +1 more source
Molecular Oncology, 2021 Respirable crystalline silica in mineral dust, wood dust, diesel engine exhaust emissions and welding fumes are among the most common process‐generated substances to which millions of workers are exposed daily.
Ann Olsson, Hans Kromhout
doaj +1 more source
Materials Genome Engineering Advances, EarlyView.Four constitutive models are evaluated for FeCoNiCr and Al0.6FeCoNiCr HEAs under wide temperature and strain‐rate conditions. The predictive capabilities and limitations of each model are then critically assessed, with particular emphasis on strain rate sensitivity, temperature dependence, and physically unrealistic responses at extreme loading ...
Yooseob Song +3 more
wiley +1 more source
Polymer Engineering &Science, EarlyView.The accelerated aging behaviours on the FFF‐fabricated PLA‐PHA Specimens. ABSTRACT Despite the increasing use of biodegradable polymers in additive manufacturing, their long‐term durability remains insufficiently understood. The aim of this study to investigate the influence of accelerated aging on the performance of fused filament fabrication‐printed ...
Han Xu +8 more
wiley +1 more source
Welding of thermally modified hornbeam [PDF]
Drvna Industrija, 2009 Welding of dowels in the base is carried out by technology of rotation welding. During welding, a physical-chemical process takes place as a result of mechanical friction because of dowel rotation and impression into the static base with the set ...
Ivica Župčić +4 more
doaj
steel research international, EarlyView.The high‐strain‐rate behavior of resistance spot‐welded DP800–DP1000 joints is investigated. Results show that microstructural gradients across BM–HAZ–FZ govern hardness, strain rate sensitivity, and failure modes. While strength increases with strain rate, energy absorption is controlled by ductility, with DP800–DP800 joints showing superior ...
Pankaj Shrivastava, Velaphi Msomi
wiley +1 more source
Wildlife Society Bulletin, EarlyView.We used drone‐based radiotelemetry and multispectral imagery to estimate detection and survival probabilities of blue‐winged teal broods in Saskatchewan, Canada. Weekly brood survival probabilities, estimated via Cormack‐Jolly‐Seber models, increased with age and were comparable between drone methods.
Grant A. Rhodes +5 more
wiley +1 more source
, 2014 Finite element numerical analyses were performed to determine three-dimensional heat flux generated by friction to wood pieces during linear friction welding.
Vaziri, Mojgan, +3 more
core +1 more source
BioResources, 2015 Wood is a pure, sustainable, renewable material. The increasing use of wood for construction can improve its sustainability. There are various techniques to assemble multi-layer wooden panels into prefabricated, load-bearing construction elements ...
Dietrich Buck +3 more
doaj +1 more source
Review of Catenary Icing on High‐Speed Railways: Characteristics, Impact and Countermeasures
High Voltage, EarlyView.ABSTRACT The pantograph–catenary system (PCS) is the only path for electrified railway trains to acquire energy. Catenary icing during winter is a common natural phenomenon, which usually leads to the deterioration of the current quality and severely affects the operational safety of trains.
Zheng Li +7 more
wiley +1 more source