Results 221 to 230 of about 6,382 (265)
Some of the next articles are maybe not open access.
Welding Robot Dynamic Simulation
Advanced Materials Research, 2013In this paper, the history and present conditions of welding robot were summarized in domestic situation and foreign situation, the latest development in technology was discussed. According to the structure and motion features of welding robots, using the UG simulation techniques can help us to establish the virtual prototype model of the robot easily,
Xue Jun Zhang, Xue Jin Zhang
openaire +1 more source
Simulating welding with shell elements
Journal de Physique IV, 2004Finite element simulations can be used to evaluate residual stresses and distortions induced by welding. Such simulations must account for complex interactions between thermal, metallurgical and mechanical phenomena. “Local” simulations are often sufficient for satisfactory predictions of residual stresses in the heat-affected zone (HAZ), but 3D ...
F. Faure, J.-M. Bergheau, J.-B. Leblond
openaire +1 more source
Simulation of Rotational Welding Operations
2010Abstract Friction welding is based on the rapid introduction of heat, causing the temperature at the interface to rise sharply and leading to local softening. This article illustrates the basic principles of direct-drive rotational friction welding and inertia friction welding. Modeling the effective friction response of the materials is
Preuss, Michael; id_orcid 0000-0003-3806-0415 +1 more
openaire +3 more sources
Simulation of Friction Stir Welding
2010Abstract This article discusses the fundamentals of friction stir welding (FSW) and presents governing equations and an analytical solution for heat transfer. It provides the solutions for structural distortion in FSW. The article describes various techniques that have been adopted to solve the equations and simulate the FSW process. The
Junde Xu, Jeff J. Bernath
openaire +1 more source
Simulation on the welding of CLAM steel
Fusion Engineering and Design, 2010Abstract China Low Activation Martensitic (CLAM) steel was regarded as the research object in this paper, three-dimensional finite element numerical model of two-layer welding by one side was established using FEA software—ANSYS, methods of ANSYS Parametric Design Language (APDL) and life–death element technique were applied to simulate the moving of
Yu-cheng Lei +4 more
openaire +1 more source
A review of welding simulation methods for large components
Progress in Natural Science: Materials International, 2023Zhiqiang Wu +2 more
exaly
Mechanical Simulation of Welding
2012Yukio Ueda, Hidekazu Murakawa, Ninshu Ma
openaire +1 more source
Generating simulated weld paths for a welding robot
2023LONSBERRY ALEXANDER JAMES +6 more
openaire +2 more sources
Validation of Welding Structure Simulations
2023Loose, T., Girresser, T., Goldak, J.
openaire +1 more source