Results 81 to 90 of about 3,150 (257)
The present review discusses the advancement in the catalytic synthesis of 5‐alkoxymethylfurfural (AMF) and levulinate esters (LEs) from the aspects of catalytic systems, reaction mechanisms, product isolation, and techno‐economic analysis, supplying valuable insights toward future sustainable and efficient manufacture of AMF and LEs. ABSTRACT The huge
Jun Zhang +6 more
wiley +1 more source
ABSTRACT The relationship between board governance and corporate carbon emission disclosure remains persistently inconsistent across the empirical literature, despite decades of accumulated evidence. Drawing on agency, stakeholder, legitimacy, institutional, and upper echelons perspectives within a single analytical framework, we conduct a three‐level ...
Mohamed Hegazy +2 more
wiley +1 more source
Properties of Engineered Wood Flooring with Cold-pressing and Emulsion Polymer Isocyanate Adhesive
For the sake of improving the product quality and economy, a series of cold-pressing experiments were carried out to investigate the material properties of engineered wood flooring with emulsion polymer isocyanate adhesive.
Guoping Yang, Xunuo Wang, Dinglan Zhong
doaj
Abstract As tunnel construction advances in lengths and depths, the construction of tunnels in high geothermal environments has become increasingly common, raising significant fire risks. In this study, a 1:20 scale model tunnel test platform was constructed to investigate the effects of a high geothermal environment on fire behavior in tunnels during ...
Xiaoxian Fei +6 more
wiley +1 more source
B1 is bord width 1, B2 is bord width 2, L is the pillar length, W is the pillar width, red color and letter A represent the pillars, and white color and number 1 represent excavated areas. Pstress is the average pillar stress; σv is the vertical component of the virgin stress, MPa; and e is the areal extraction ratio. e = B o B o + B P ${\rm{e}}=\frac{{
Tawanda Zvarivadza +4 more
wiley +1 more source
Basketball Surfaces and Coefficient of Restitution
A basketball was released from varying drop heights to simulate the impact speeds of a typical soft, medium, and hard dribble. This was repeated across four different surfaces that students typically play on–exposed aggregate concrete, maple wood ...
Kristyn Peacock, Faith Pearson
doaj
Changes in value-added wood product manufacturer perceptions about certification in the United States from 2002 to 2008 [PDF]
Certification is a voluntary mechanism which involves assessing either forest management practices or chain-of-custody tracking through supply chains against a set of standards.
Richard Vlosky +3 more
doaj
Based on the 90 datasets, ERT and four optimization algorithms were used to build four hybrid models to predict the UCS of the backfill body. The SMA‐ERT model was the most effective model, and it can reliably guide the design of the backfill ratio parameters. Abstract This study analyzed the feasibility of using titanium (Ti) tailings as a backfilling
Weijun Liu, Zida Liu, Zhixiang Liu
wiley +1 more source
Deflection characteristics of wood-joist floors
Two separate criteria must be considered in designing joists, strength and deflection. Because specified deflection limits for wood-joist floors were found to vary from building code to building code and from country to country the author looked into how stiff residential wood- joist floors should be.
Hansen, H. +1 more
openaire +2 more sources
Associations Between Microbial Depletion and Autonomic Dysregulation in Binge‐Eating Disorder
ABSTRACT Objective The interplay between the gut microbiome and autonomic nervous system remains unexplored in binge‐eating disorder (BED). We aimed to explore specific microbial alterations in BED and examine their potential association with cardiac vagal tone as a distinct bio‐behavioral phenotype.
Shuang Liang +4 more
wiley +1 more source

