Results 1 to 10 of about 10,780 (226)

Experimental investigation of the impact of wood sawdust incorporation on the physical and thermal properties of fired clay bricks [PDF]

open access: yesScientific Reports
Wood sawdust, a byproduct of the wood industry, presents significant environmental and economic challenges due to its disposal. This study investigates the effects of incorporating wood sawdust into fired clay bricks on their physical and thermal ...
Omrane Benjeddou
doaj   +3 more sources

Multifunctional Polyurethane Composites with Coffee Grounds and Wood Sawdust. [PDF]

open access: yesMaterials (Basel), 2022
Currently, the fundamental activity that will allow for the development of an economy with closed circulation is the management of food waste and production waste for the preparation of biocomposites. The use of waste materials of natural origin allows for the creation of innovative composites with improved physicochemical and functional properties ...
Bartczak P   +4 more
europepmc   +3 more sources

Breakage Strength of Wood Sawdust Pellets: Measurements and Modelling. [PDF]

open access: yesMaterials (Basel), 2021
Wood pellets are an important source of renewable energy. Their mechanical strength is a crucial property. In this study, the tensile strength of pellets made from oak, pine, and birch sawdust with moisture contents of 8% and 20% compacted at 60 and 120 MPa was determined in a diametral compression test.
Horabik J   +9 more
europepmc   +4 more sources

Wood Sawdust/Natural Rubber Ecocomposites Cross-Linked by Electron Beam Irradiation [PDF]

open access: yesMaterials, 2016
The obtaining and characterization of some polymeric eco-composites based on wood sawdust and natural rubber is presented. The natural rubber was cross-linked using the electron beam irradiation. The irradiation doses were of 75, 150, 300 and 600 kGy and
Elena Mănăilă   +2 more
exaly   +3 more sources

Preparation of Polyurethane Adhesives from Crude and Purified Liquefied Wood Sawdust. [PDF]

open access: yesPolymers (Basel), 2021
Polyurethane (PU) adhesives were prepared with bio-polyols obtained via acid-catalyzed polyhydric alcohol liquefaction of wood sawdust and polymeric diphenylmethane diisocyanate (pMDI). Two polyols, i.e., crude and purified liquefied wood (CLW and PLW), were obtained from the liquefaction process with a high yield of 99.7%.
Jiang W   +5 more
europepmc   +8 more sources

Torrefaction and Densification of Wood Sawdust for Bioenergy Applications [PDF]

open access: yesFuels, 2022
In this study, wood sawdust as waste residue from wood processing mills was pretreated using torrefaction to improve fuel properties and densified to facilitate transportation. Sawdust was torrefied in a fixed bed reactor using inside temperatures (IT) of 230, 260 and 290 °C for 15, 30 and 45 min, residence time.
Peyman Alizadeh   +5 more
openaire   +2 more sources

The stabilization of clay soil using wood sawdust ash and its effect against unconfined compressive strength (UCS) value

open access: yesTeknika, 2023
Soil is the basis for the construction of roads, buildings, dams, and embankments. Construction activities on roads cannot be separated from soil works on which the infrastructure was built.
Enden Mina   +3 more
doaj   +1 more source

The Effect of Alkali Concentration and Hydrolysis Time on the Production of Oxalic Acid from Wood Sawdust Waste by Alkali Hydrolysis Process

open access: yesChemical Engineering Transactions, 2023
Mahogany wood is a type of wood often found in sawmills because the wood grows faster than other types of wood, so a lot of mahogany sawdust is wasted and not utilized in a product that is discarded and has economic value.
Widi M. Wiranti   +3 more
doaj   +1 more source

Using Some Available Palm Residues in new Valley as Alternative Bedding Materials for Raising Broilers [PDF]

open access: yesJournal of Desert and Environmental Agriculture, 2021
This study was conducted to evaluate the effect of the some available plant residues as alternative litter materials in New Valley on the growth performance of broiler. The study included six groups of treatments, with three replicates for each treatment
Mohamed Alm El-deen   +3 more
doaj   +1 more source

Evaluation of Mechanical and Water Absorption Properties of Alkaline-Treated Sawdust-Reinforced Polypropylene Composite

open access: yesJournal of Engineering, 2020
Sawdust is a natural composite obtained from natural resources such as shrubs and trees and in a large amount from the wood industry as a waste. This study aimed to evaluate the mechanical and water absorption properties of alkaline-treated wood sawdust ...
Eyasu Ferede
doaj   +1 more source

Home - About - Disclaimer - Privacy