Results 11 to 20 of about 40,760 (301)

Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials

open access: yesFibers
This paper investigates the fundamental workability of 3D printed concrete materials incorporating different fiber types. Fluidity, extrudability, and buildability were proposed as key indicators for assessing printability, evaluated through ...
Qunyi Huang   +4 more
doaj   +2 more sources

Mixing Workability of Polymer-Modified Asphalt Mixtures Based on Discrete Element Modeling. [PDF]

open access: yesPolymers (Basel)
Workability of asphalt is crucial for pavement construction and quality assurance. The macroscopic and mesoscopic mixing workability of different base and polymer-modified asphalt mixtures was evaluated using a modified testing device and simulated by ...
Lin Y, Li S, Huang J, Jiang Z.
europepmc   +2 more sources

Properties of high-workability concrete with recycled concrete aggregate [PDF]

open access: yes, 2011
This study presents the effects of recycled concrete aggregate (RCA) on the key fresh and hardened properties of concrete. RCA was used to produce high-workability concrete substituting 0-100 natural coarse aggregate (NCA) by weight.
Salam, M.A.   +5 more
core   +4 more sources

Design of Normal Concrete Mixtures Using Workability-Dispersion-Cohesion Method [PDF]

open access: yes, 2016
The workability-dispersion-cohesion method is a new proposed method for the design of normal concrete mixes. The method uses special coefficients called workability-dispersion and workability-cohesion factors.
Hisham Qasrawi, Hisham Qasrawi
core   +1 more source

Multisite Pain and Reduce Workability in College Students [PDF]

open access: yes, 2022
Background: Multisite pain includes discomfort or strain in the neck, shoulder, low back, or other parts of the body. It is one of the most serious health issues affecting both adults and kids.
Sahiba, S. (Sahiba)   +3 more
core   +2 more sources

The Effect of pH on the Workability of Concrete [PDF]

open access: yes, 1952
It was believed that the pH of concrete would affect the workability. The effect of pH on the workability was determined experimentally by adding chemical admixtures to a cement mortar mix, measuring the pH and workability.
Linderman, Robert Bruce
core   +1 more source

Investigation and Preparation of the Plastering Mortar for Autoclaved Aerated Blocks Walls

open access: yesCrystals, 2021
The increase in the use of aerated concrete blocks (AAB) in construction walls has increased the demand for specialized plastering mortar, which should have the characteristics of high water retention, low water absorption, low thermal conductivity and ...
Tao Feng   +4 more
doaj   +1 more source

Study on Workability Compensation Laws of Concrete with Different Strength Grades [PDF]

open access: yes, 2020
This paper, by adopting the reverse mixing compensation technique of the admixtures, deals with the rules of how the secondary compensation mechanism of admixtures affects the recovery of concrete workability under conditions with different strength ...
Xu Jun   +5 more
core   +1 more source

Restoration of Deteriorated Concrete Columns by Wrapping with an Ecological UHPC

open access: yesProceedings, 2019
Ultra high performance concrete (UHPC) is self-compacting, reaching compressive strength over 200 MPa and flexural strength exceeding 30 MPa material. The used very low W/C ratio and high amount of Portland cement often exceeding 900 kg/m3, addition of ...
Ankit Kothari   +2 more
doaj   +1 more source

Development of Non-Proprietary Ultra-High Performance Concrete Mixtures

open access: yesBuildings, 2022
The development of non-proprietary Ultra-High Performance Concrete (UHPC) is one way to reduce the initial cost of construction. However, workability is a major issue for which such mixtures are not practical in field conditions.
Tawsif Mohammad Hasan   +4 more
doaj   +1 more source

Home - About - Disclaimer - Privacy