Results 21 to 30 of about 217 (78)

Influence of static and dynamic rotor/stator misalignments in axial flux magnetically geared machines

The Journal of Engineering, Volume 2019, Issue 17, Page 3991-3996, June 2019., 2019
Here, static and dynamic (rotating) misalignments between the low‐speed rotor (LSR) and the stator of axial flux magnetically geared machines are studied with the aid of 3‐D finite element analysis (FEA). The influence of rotor/stator axis misalignments on machine performance in terms of cogging torque, air‐gap flux density, and back‐EMF is ...
Mohammed F. Hamad Khatab, Zi‐Qiang Zhu, Huayang Li, Yue Liu   +3 more
wiley   +1 more source

Comparison of Three Analytical Methods for the Precise Calculation of Cogging Torque and Torque Ripple in Axial Flux PM Machines

Mathematical Problems in Engineering, Volume 2016, Issue 1, 2016., 2016
A comparison between different analytical and finite‐element (FE) tools for the computation of cogging torque and torque ripple in axial flux permanent‐magnet synchronous machines is made. 2D and 3D FE models are the most accurate for the computation of cogging torque and torque ripple.
Ahmed Hemeida, Bert Hannon, Hendrik Vansompel, Peter Sergeant, Dane Quinn   +4 more
wiley   +1 more source

Open‐Circuit Magnetic Equivalent Circuit Model for Single‐Side Double‐Row Stator Axial Flux Wound Field Machine

IET Electric Power Applications, Volume 20, Issue 1, January/December 2026.
In this paper, a 3D open‐circuit magnetic equivalent circuit model is proposed for rapid performance analysis of the SSDRS‐AFWF machine. This model utilises different discretisation levels for the machine components according to the local magnetic saturation condition, and the double‐cross structure is introduced in the air gap to improve the modelling
Ziyu Cang, Wentao Zhang, Zhongze Wu, Wei Hua   +3 more
wiley   +1 more source

Advanced Design and Modelling of Halbach Array Permanent Magnets for High‐Efficiency Axial Flux Wind Generators

IET Electric Power Applications, Volume 20, Issue 1, January/December 2026.
This paper presents the design and optimisation of a high‐efficiency axial flux YASA permanent magnet generator for direct‐drive wind applications. A quasi‐3D modelling approach combined with FEM analysis is used to explore segmented Halbach array configurations, enabling accurate performance prediction with reduced computational cost.
Giovanni Landi, Antonino Musolino, Luca Sani   +2 more
wiley   +1 more source

Multi‐level optimisation design of a yoke‐less axial‐field flux‐switching permanent magnet motor considering the fault‐tolerant capability

IET Electric Power Applications, Volume 19, Issue 1, January/December 2025.
This paper presents a multi‐level optimisation approach to enhance the fault‐tolerant capability of a Yoke‐less Axial‐Field Flux‐Switching Permanent Magnet (YASA‐AFFSPM) motor for safety‐critical applications. The design is optimised at three levels to achieve multiple objectives, focusing on average torque, cogging torque, and fault‐tolerant ...
Javad Rahmani‐Fard, Mohammed Jamal Mohammed   +1 more
wiley   +1 more source

Comparison and Analysis of Stator Plate Holder on Yokeless and Segmented Armature Machine

Journal of Physics, Conference Series, 2020
This paper deals with comparison and analysis of stator plate holder on Yokeless and segmented armature (YASA) machine. YASA topology consists of two rotors and one inner stator comprised of many independent segments.
A. F. Desanti, D. A. Asfani, M. N. Yuniarto, Y. U. Nugraha   +3 more
semanticscholar   +1 more source

Analytical Prediction of Optimal Split Ratio for Maximum Torque Per Copper Loss in AFPM Machines

IET Electric Power Applications, Volume 19, Issue 1, January/December 2025.
Different from the existing analytically predicted optimal split ratio λopt for the maximum torque, that is, λopt ≈ 0.58, it is found that the optimal split ratio λopt for the maximum torque per copper loss depends on the stator slot number Q, that is, λopt increases with a larger Q, whilst the rotor pole number 2p has little influence on λopt ...
Lingyun Shao, Tao Liu, Zhuoran Zhang, Xueyi Yan, Zhongze Wu, Wei Hua   +5 more
wiley   +1 more source

Comprehensive Study of a Novel Six‐Phase Rotor‐Permanent Magnet Axial Field Modular Fault Tolerant Flux‐Switching Machine for Electric Vehicle/Hybrid Electric Vehicle Application

IET Electric Power Applications, Volume 19, Issue 1, January/December 2025.
A novel six‐phase rotor‐permanent magnet axial field modular fault‐tolerant flux‐switching machine (RPM‐AFMFTFSM) is proposed. The advantage of the proposed machine with respect to the overload capability, flux‐weakening capacity, antidemagnetisation ability and fault‐tolerant operating performance are revealed.
Yixiang Tu, Mingyao Lin, Keman Lin, Yong Kong   +3 more
wiley   +1 more source

Multi-Step Method for Axial-Flux Permanent-Magnet Motor to Reduce Performance Analysis Time

IEEE Access
This paper proposes a novel multi-step analysis (MSA) method to reduce the analysis time and improve the accuracy of finite element analysis (FEA) for axial-flux permanent-magnet motors (AFPMM).
Ji-Sung Lee, Dong-Kuk Lim, Dong-Hee Lee, Peel-Joong Kim, Han-Kyeol Yeo   +4 more
doaj   +1 more source

Methodology for designing megawatt-scale yokeless and segmented armature (YASA) generators for wind turbines

, 2016
This thesis develops design methodologies for megawatt(MW)-scale yokeless and segmented armature (YASA) generators for wind turbine applications. The methodologies include the electromagnetic, the structural and the thermal designs of a YASA generator.
openaire   +1 more source