Results 51 to 60 of about 3,181 (198)
Evaluation of oxidation and thermal cyclic behavior of YSZ, Gd2Zr2O7 and YSZ/Gd2Zr2O7 TBCs
Abstract Thermal barrier coatings (TBCs) are widely used to increase gas turbine efficiency and to prolong the lifetimes of superalloy substrates. Yttria (7–8%) stabilized zirconia (YSZ) is used as a state of the art TBC top coating material. In recent years, rare earth zirconates have drawn interest as top coating materials due to their high phase ...
Doleker, Kadir Mert +5 more
openaire +2 more sources
Interfacial charge transfer from LSC to PrO2 induces a local electric field and promotes oxygen vacancy formation, which together enhance CO2 adsorption, facilitate CO32− intermediate formation, and significantly boost the high‐temperature CO2 electrolysis performance of PrO2–LSC heterostructured electrodes.
Mengzhen Zhou +10 more
wiley +1 more source
Deposition of NiO/YSZ Composite and YSZ by Suspension Plasma Spray on Porous Metal
Abstract The use of a liquid feedstock carrier in suspension plasma spray (SPS) permits injection of fine powders, providing the possibility of producing sprayed coatings that are both thin and dense and have fine microstructures.
Wang, Y. +5 more
openaire +2 more sources
Coordinated engineering of the anode, electrolyte, and interface underpins the rational design of next‐generation solid‐state metal‐sulfur batteries. Solid‐state metal‐sulfur batteries are emerging as a transformative energy storage platform with the potential to overcome the fundamental limitations of conventional flooded cells, particularly ...
Ziyu Feng +4 more
wiley +1 more source
The aim of this study was to explore the effect of different solid phases and varied amounts of polyvinyl alcohol (PVA) on granule size of plasma-sprayable yttria-stabilised zirconia (YSZ) with YSZ whiskers (YSZ/W) and lanthanum cerate (La2Ce2O7, LC ...
Milan Parchovianský +5 more
doaj +1 more source
Hot corrosion behavior of yttria stabilized zirconia (YSZ), YSZ/normal Al2O3, and YSZ/nano-Al2O3 coatings was investigated in the presence of molten mixture of Na2SO4 + V2O5 at 1000°C.
Mohammadreza Daroonparvar +5 more
doaj +1 more source
A Vehicle Exhaust NOx Electrochemical Sensor Based on Au-Yttria Stabilized Zirconia Nanocomposite
Mixed potential sensor which is built on Yttria Stabilized Zirconia (YSZ) with a plain planar structure Au/YSZ/Pt has actual benefit among different kinds of NOx sensors.
Junhua Wu, Fei Ge, Yingjie Li
doaj +1 more source
A‐site multi‐cation doping in Pr0.5Ba0.5FeO3−δ produces Pr1/6La1/6Nd1/6Ba1/6Sr1/6Ca1/6FeO3−δ with reduced size mismatch and charge‐transfer energy, showing the highest electrocatalytic activity among those of Pr0.5Ba0.5FeO3−δ. Although Pr0.5Ba0.5FeO3–δ (PBF)‐based perovskite cathodes are prevalent for solid oxide fuel cells (SOFCs), their practical ...
Shuaihang Chen +10 more
wiley +1 more source
Development of Calcium‐Based Coatings to Mitigate Vanadate Corrosion
Ca‐rich coatings can suppress the corrosive attack of molten V2O5 by forming Ca2 V2 O7 and Ca V2 O6. For this, a large Ca‐reservoir is key to mitigate corrosion at 600°C and 700°C. ABSTRACT Vanadate corrosion occurs in devices powered by heavy fuel oil, such as stationary turbines.
Mark Alexander Ulherr +5 more
wiley +1 more source
Through a combination of in situ electrochemical corrosion rate measurements and FactSage thermochemistry modeling, chloride and sulphate ions were found to influence the corrosion of carbon steel in high‐temperature boiler water through distinct mechanisms: chloride acidifies the solution, raising iron solubility, while sulphate leaves solubility ...
Benjamin A. Loder, William G. Cook
wiley +1 more source

