Results 31 to 40 of about 16,705 (195)

Laser‐Driven Halide Exchange and High‐Resolution Multicolor Patterning of Perovskite Films

open access: yesRare Metals, EarlyView.
ABSTRACT Translating the excellent properties of metal halide perovskites (MHPs) into practical flexible optoelectronic devices requires high‐resolution multicolor patterning techniques that are compatible with post‐fabrication processing. However, such a capability has remained elusive.
Shu Yang   +6 more
wiley   +1 more source

Structure Analysis and Optimization for 5-axis CNC Grinder Bed [PDF]

open access: yes, 2012
在AnSyS软件平台上建立五轴数控磨床有限元模型,对其床身结构进行静、动态特性分析与优化,通过对比提出两种优化方案,分析结果表明:综合改进后的床身相比原床身在静态特性上得到极大提高,且动态特性也有相应的增强。Finite element model of 5-axis CNC grinder bed was built on ANSYS software platform.The two optimal schemes for the bed structure were extracted on ...
冮铁强, 姚博世, 姚斌, 张祥雷
core  

Electrospun Carbon Nanofiber‐Based Multifunctional Electrocatalysts for Zinc‐Air Batteries and Overall Water Splitting: Fabrication, Progress, and Perspective

open access: yesRare Metals, EarlyView.
ABSTRACT The development of high‐performance and stable electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) plays a critical role in advancing clean energy technologies, including metal‐air batteries and hydrogen production through overall water splitting.
Chen‐Yu Cai   +4 more
wiley   +1 more source

直流断路器快速电磁机构分合特性研究

open access: yesGaoya dianqi, 2016
文中基于某轨道交通直流断路器的总体结构模型,设计了一种快速电磁操动机构,对其结构和工作原理进行了阐述。基于电磁场分析理论,利用有限元分析软件ANSYS对电磁机构的静态特性进行了仿真分析,得出了在合闸状态下磁场分布和动铁心所受电磁吸力情况,并对其影响因素进行了分析。然后对电磁操动机构在不同电流条件下的电磁吸力随气隙变化进行了仿真分析,得出了机构空载条件下的动态输出插值数据。最后建立直流断路器动力学分析模型,借助动力学分析软件ADAMS,将建立的动态离散数据导入其中,对直流断路器动态分合特性进行了仿真 ...
王海燕   +5 more
doaj  

Probability character of two direction variation S-rough sets [PDF]

open access: yes, 2008
文献[1]提出了S-粗集,给出了它的两类结构:单向S-粗集,双向S-粗集.[2~16]对S-粗集的特性和应用,给出进一步讨论,推广了波兰数学家Z.Pawlak提出的粗集[17].S-粗集与Z.Pawlak粗集的共同特征是以元素的R-等价类来定义的.S-粗集与Z.Pawlak粗集的主要差异是S-粗集具有动态性,而且S-粗集的动态性是通过元素迁移体现出来的,由于元素迁移在很多情况下是不确定的,表现出一定的随机性,也就是说不同的元素迁移发生的可能性大小是不同的.文献[18]在文献[1]的基础上提出变异S ...
修明
core  

高转速气驱研抛装置设计及研抛特性研究 [PDF]

open access: yes, 2019
针对传统磨削中电主轴体积大和转速低的问题,设计了一种高转速、小体积气驱研抛装置。通过理论计算对轴承承载力进行了分析,并在有限元软件中建立了装置的仿真模型,对装置刚度、固有频...福建省科技计划项目 ...
彭云峰, 曾鑫龙, 陈登铃
core   +1 more source

Hybrid Probiotic Hydrogel With Curcumin‐Loaded MnO2 Nanoparticles Enhances Diabetic Wound Healing Through Multimodal Microenvironmental Regulation

open access: yesRare Metals, EarlyView.
ABSTRACT Skin wound injuries are often accompanied by bacterial infections and severe inflammation. Especially, M1‐type macrophages at the wound site can trigger a cascade of inflammatory responses, mediating a vicious cycle of inflammation. Meanwhile, hypoxia further exacerbates vascular damage and constriction in the wound microenvironment, thereby ...
Xianfeng Wang   +6 more
wiley   +1 more source

液体火箭发动机涡轮泵转子瞬态响应特性

open access: yesZhendong Ceshi yu Zhenduan
针对液体火箭发动机涡轮泵转子动态响应参数难以直接测得的问题,以实际涡轮泵转子为对象,开展转子瞬态响应仿真计算和实测振动数据提取分析。首先,采用有限元方法建立考虑支承结构参与振动的转子动特性计算模型,计算转子的稳态特性;其次,以发动机试车实测的涡轮泵启动升速曲线为基础,计算转子的瞬态响应特性,并与从实测的振动加速度数据中提取的转子动特性进行对比分析。结果表明:转子瞬态响应峰值出现的位置相比稳态响应有一定滞后,启动加速度越大,滞后越明显 ...
doaj   +1 more source

高压断路器机械特性振动信号特征提取和故障诊断方法研究

open access: yesGaoya dianqi, 2015
针对高压断路器机械振动信号,在正常状态、分闸弹簧单根脱落状态和操作及传动机构卡涩状态下,采用模糊C聚类分析算法比较短时傅里叶变换、小波包能量熵和希尔伯特—黄变换3种特征提取方法的分类性能,提出了基于相关向量机理论的断路器机械特性故障诊断方法,搭建了数据采集系统,研究了断路器机械特性不同状态下信号特征值的变化规律,并通过实验证明了特征提取和故障诊断方法的有效性。
李斌, 李爽, 鲁旭臣
doaj  

Research on Dynamic Characteristics of Monopile Offshore Wind Turbine Tower Under Different Wind Speed Conditions [PDF]

open access: yes
Based on the ANSYS finite element software, the NREL 5 MW monopile offshore wind turbine tower system was modeled in 3D. The influence of different wind speeds on the dynamic characteristics of the tower structure was simulated and analyzed under the ...
CHEN Shangnian   +4 more
core   +1 more source

Home - About - Disclaimer - Privacy