Results 21 to 30 of about 30,971 (191)
Rare Metals, EarlyView.ABSTRACT Internal oxidation has been identified as an effective method for enhancing the strength of AgMg alloys. However, the concurrent occurrence of embrittlement remains inadequately understood, thus limiting their broader application. This study investigates the oxidation behavior of AgMg alloys with Mg concentrations ranging from 1 at% to 7 at ...
Hai‐Cheng Zhu +12 more
wiley +1 more source
Jianzhu Gangjiegou Jinzhan, 2017 建立了双钢板-混凝土组合剪力墙的精细化有限元模型,在模型中采用了基于断裂能和单元特征长度的混凝土应力-应变关系,有限元分析获得的墙体侧向力-侧向总变形关系、弯矩-曲率关系与已有的他人试验结果吻合较好。对曲率二次积分求得弯曲变形,将总变形分解为弯曲变形和剪切变形两部分。结果表明,破坏模式为弯曲控制的双钢板-混凝土组合剪力墙在加载过程中弯曲刚度和剪切刚度均有退化,其剪切变形不宜采用弹性方法计算,且剪切变形占总变形的比例在变形过程中基本上为常数。对剪切变形在总变形中所占的比例进行了参数分析,结果表明 ...
武晓东, 童乐为, 薛伟辰
doaj
Nonlinear finite element analysis for seismic performance of high-strength concrete beam-column joints with new reinforcement details [PDF]
, 2006 Because the factors that affect the behavior of the beam-column joints are complicated, an experimental study alone is not sufficient. Therefore, a nonlinear finite element analysis was conducted to provide better understanding of the performance of the ...
Gan, L, Li, J, Pam, HJ
core
Rare Metals, EarlyView.ABSTRACT The transformative potential of gallium nitride high electron mobility transistors (GaN HEMTs) in advancing carbon‐neutral power systems remains bottlenecked by contact resistance (Rc) at the metal–semiconductor (M‐S) interface, a critical determinant of switching losses and frequency response.
Ji‐Zhou Zhang +8 more
wiley +1 more source
Gaoya dianqi, 2019 电力变压器绕组受短路电磁力作用后,可能出现可恢复的弹性变形或不可恢复的塑性变形。文中通过电磁-结构耦合有限元分析,对短路电流冲击作用下的变压器绕组弹、塑性变形特性进行理论分析和三维数值模拟,以揭示绕组弹性和塑性变形机理。首先通过有限元电磁计算分析了绕组内部短路电磁力分布,其中绕组线饼的周向电磁力分布不均是导致绕组变形的重要原因。在弹性变形计算的基础上,依据材料学的弹塑性变形分析理论,构建了绕组累积变形的量化分析模型,能够反映多次短路电磁力作用后绕组变形的累积效应。最后,以一台110 kV/25 000 ...
张海军 +4 more
doaj
Marine flavobacterium Gramella flava JLT2011 utilization polysaccharide of phytoplankton and characterization of new species of Pelagibaca bacterium [PDF]
, 2015 海洋浮游植物是海洋食物网的初级生产者，是海洋有机质重要分泌者。海洋浮游植物光合作用产生的有机质,通过海洋细菌分泌的一系列胞外酶等将颗粒有机质POM（ParticleOrganicMatter,POM）进一步代谢为生物可利用的溶解有机质（BioavailableDissolvedOrganicMatter,BDOM）。在这一个过程中噬纤维菌-黄杆菌-拟杆菌(Cytophaga-Flavobacterium-Bacteroides,CFB)菌群起着重大的作用。这类细菌形态多样，一般具有较强的运动性和粘附性 ...
林颖芳
core
Rare Metals, EarlyView.ABSTRACT This study elucidates the oxidation mechanisms governing Y/Hf‐doped AlCoCrFeNiTi high‐entropy alloys (HEAs) and reveals the pivotal role of fabrication processes in dictating high‐temperature oxidation behavior. We demonstrate that casting and spark plasma sintering (SPS) promote Y/Hf segregation, resulting in heterogeneous oxide formation and
Huaqing Yi +5 more
wiley +1 more source
Research on Key Issues in Eddy Current Nondestructive Evaluation of Residual Stress in Aluminum Alloy [PDF]
, 2015 铝合金作为制造业发展的基础材料，在航空航天、高速铁路、建筑工程、船舶制造、汽车工业等支柱产业中有着重要地位。残余应力往往是造成铝合金结构破坏的重要因素。有效的评价应力状态，特别是导致损伤出现的临界应力状态是评价设备结构强度、可靠性的重要依据。传统的无损检测方法已广泛应用于工程实际中，但大部分局限于对已成型的缺陷进行检测。对于可能导致损伤出现的隐性、不规律变化的残余应力状态的评价则较为困难。 目前，应用较多的残余应力检测法主要有盲孔法、X射线法、超声波法以及磁测法。这些方法在使用上都存在很大的局限性 ...
汪涛
core
Rare Metals, EarlyView.ABSTRACT A major challenge in fabricating eutectic NiTiNb alloys is the incomplete melting of Nb due to its much higher melting point than the NiTi matrix. In this work, a novel electron‐beam freeform additive manufacturing strategy is developed to eliminate unmelted Nb particles and achieve a fully eutectic structure through independent dual‐wire ...
Qing‐Da Zhang +9 more
wiley +1 more source
Dianci bileiqi, 2007 电力机车车顶用柱式复合绝缘子风洞试验分析结果表明:电力机车在不同的运行速度下,其车顶用柱式复合绝缘子的主体挠度形变量及伞裙变形角度不同,机车时速越快,主体挠度形变量及伞裙变形角度就越大,但所有产品挠度形变量均小于2mm,伞裙变形均在3mm范围内,伞裙变形角度均小于2°,停风后,伞裙恢复均在1mm以内。在产品结构高度一致时,其形变量主要取决于绝缘子伞裙的形状、数量、迎风面积和主体直径的大小,停风后的伞裙恢复取决于伞裙形状设计及伞套材料的配比。
余明宣 +3 more
doaj