Results 21 to 30 of about 1,969,748 (147)

爆炸成形模型律

open access: yes, 2004
引言在爆炸成形工艺技术发展的现阶段,模型试验是确定工艺条件和工艺参数(如所需药量)的一个主要方法。因此,如何选定模型试验方案,如何整理和归纳试验数据以及如何根据模型试验结果,确定实物生产的工艺条件和参数等就成为需要研究和解决的问题。换言之,需要研究和解决模型律问题。在这篇报告里讨论,当毛料为薄板或薄壳的时候,爆炸成形的模型律,提出我们对这一问题的见解和认为需要进一步探讨的问题。为明确起见,我们把所讨论的对象规定为:药包具有一定的几何形状,而且除药包尺寸和毛料的厚度外,毛料的其他尺寸,药包的悬挂位置 ...
郑哲敏
core   +2 more sources

无纬绑扎带在复合外套MOA中的应用

open access: yesDianci bileiqi, 2001
芯体成型工艺是决定复合外套 MOA的技术性能和成本的关键。笔者分析了各种芯体成型工艺的利弊 ,介绍了无纬带的性能及选用方法 ...
阎中华, 袁海婴
doaj  

Synergistic Effect of Hydrophilic Surface and Nano‐Ag2O in TiO2‐Based Composites Coating on Antibacterial and Osteogenic Properties of Low Modulus Ti‐Mo‐Ag Alloy

open access: yesRare Metals, Volume 45, Issue 9, September 2026.
ABSTRACT Ti‐15Mo‐2.5Ag alloy exhibited a low modulus and strong antibacterial ability but poor bioactivity. To resolve this problem, sandblasting and anodization were used to create a hydrophilic and nano‐Ag2O‐containing TiO2 coating. Subsequently, the microstructure and physicochemical properties were investigated by scanning electron microscopy, X ...
Yanchun Xie   +11 more
wiley   +1 more source

用等静压方法制造绝缘子的工业性生产

open access: yesDianci bileiqi, 1986
在陶瓷工业方面已普遍采用了粉料等静压成型工艺。等静压成型可以制作致密性好、外形复杂的大型制品,所以是电瓷生产工艺的发展方向。目前,《无产者》绝缘子工厂用等静压成型自动化流水线生产的ИОС—110—2000УХЛ。TI型绝缘子,其烧成尺寸为:长度1071±5mm,主体直径158±1mm,伞径230±1mm ИОС—110—2000УХЛ。TI型绝缘子的技术特性如下:
О·П·ДРУГОВЕЙКО, 刘凤岐
doaj  

Synergetic Ruthenium Clusters and Ligand Motifs in Insoluble Polyoxometalates for Efficient Urea Electrosynthesis

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT The electrocatalytic co‐reduction of CO2 and nitrate (NO3− ${\text{NO}}_{3}^{-}$) to synthesize urea presents a sustainable alternative to traditional industrial processes, yet its efficiency is fundamentally limited by the kinetically mismatched activation and coupling of CO2 and NO3− ${\text{NO}}_{3}^{-}$.
Jiayu Liu   +9 more
wiley   +1 more source

The Formation and Hardening Mechanisms of Multiscale Gradient Structures Tailoring by Explosive Hardening and Annealing in Commercially Pure Titanium

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Gradient structures (GS) introduced by plastic deformation have been shown to effectively enhance the surface properties of metallic materials. However, the GS fabricated by existing methods often suffers from limited hardening depth and limited control over the GS layer, which constrain their engineering applications.
Yansong Guo   +5 more
wiley   +1 more source

Synergy Effects of Dual‐Gel‐Assisted Structural Engineering and Bimetallic Doping Regulation Realize Ultrastable High‐Rate Performance of NASICON Cathodes for Sodium‐Ion Batteries

open access: yesRare Metals, Volume 45, Issue 8, August 2026.
ABSTRACT Na‐superionic‐conductor‐type (NASICON) Na4MnV(PO4)3 (NMVP) is an appealing cathode for sodium‐ion batteries (SIBs), but its application is hindered by Jahn–Teller distortions, sluggish Na+ kinetics and poor conductivity, leading to rapid capacity fade.
Huan Liu   +8 more
wiley   +1 more source

氧化锌阀片成型工艺与新型阀片专用程控液压机的研制

open access: yesDianci bileiqi, 1995
介绍了氧化锌阀片成型的三种不同工艺方法。详细对比了三种成型阀片质量的优劣,阐明我所新研制成功的阀片成型专用程控液压机的性能与特点。该机的脉冲振动排气及模套振动动作为国内首创,为本行业成型大高径比阀片(厚阀片)提供了可靠的工艺保证。
李成祥, 严幼良, 鲁延宾, 张弘
doaj  

Microstructure Engineering Toward High Cost‐Effective Nd–Fe–B Sintered Magnets: A Review

open access: yesRare Metals, Volume 45, Issue 7, July 2026.
ABSTRACT Nd–Fe–B sintered magnets, critical for enhancing electromechanical conversion efficiency and operational stability in wind turbines and electric vehicle drives, are prized for their outstanding coercivity, high remanence, and superior maximum energy product.
Dongmin Zhang   +5 more
wiley   +1 more source

湿袋法冷等静压成型工艺

open access: yesDianci bileiqi, 1995
简要介绍了粉末成型的基本规律,重点叙述了湿袋法冷等静压成型工艺流程中各阶段的操作要领及影响坯件质量的主要因素。指出选择合理的工艺条件,严格控制工艺规程,是确保坯件质量,提高合格率的关键。
江崇经
doaj  

Home - About - Disclaimer - Privacy