Results 11 to 20 of about 526,660 (157)
Gaoya dianqi, 2017 电容器组作为电力系统重要无功补偿设备之一,通常采用真空断路器对其进行投切。当真空断路器在开断电容器组发生重击穿时会产生过电压。产生的过电压可能会对真空断路器、电容器组或其他电气设备产生威胁。根据实际运行情况,真空断路器通常被用于无功补偿回路的电缆系统中,因此系统中存在的寄生电容不可避免的参与了真空断路器开合电容器组的过程。文中结合变电站中典型的补偿回路,分析了寄生电容的分布对真空断路器开断电容器组产生过电压的影响。通过实验室实施的等价性试验,证明了电源侧和负载侧寄生电容支路电流的存在,且此电流表现为高频、
范广伟 +4 more
doaj
Emerging MBenes for Energy Technologies
Rare Metals, Volume 45, Issue 6, June 2026.ABSTRACT The escalating global demand for sustainable energy is driving the search for transformative materials that transcend the limitations of conventional systems. Two‐dimensional (2D) transition metal borides (MBenes) have recently emerged as a compelling class, distinguished by unique electronic structures, tunable surface chemistry, and ...
Yingrui Ding +5 more
wiley +1 more source
Gaoya dianqi, 2018 超、特高压避雷器电位分布的改善通常采用综合均压措施,即在高压端加均压环,同时在避雷器元件上并联均压电容柱。虽然均压电容柱能有效改善避雷器电压分布,但也带来了性能难以检验及参数选择不当会使避雷器运行可靠性下降等诸多不安全因素。通常均压柱中电容器电容比避雷器电阻片电容小很多,电容柱自身的电位分布比电阻片柱更不均匀,局部电容器的荷电率很高,会导致其加速老化,直至毁坏。文中采用有限元法建立1 000kV交流系统无间隙金属氧化物避雷器挂网运行时的三维仿真模型,在给定的均压环配置基础上 ...
张金凤 +5 more
doaj
Rare Metals, Volume 45, Issue 6, June 2026.ABSTRACT Aqueous zinc‐ion hybrid capacitors (ZICs) bridge the gap between high‐energy batteries and high‐power supercapacitors, yet their performance is fundamentally bottlenecked by the micropore confinement effect in carbon cathodes, which restricts hydrated Zn2+ transport and active site utilization.
Qian Li +12 more
wiley +1 more source
Gaoya dianqi, 2019 滤波电容器是高压直流输电换流站的主要噪声来源,其设备数量多、装置高度高,对换流站周边区域产生显著的可听噪声干扰。为解决滤波电容器可听噪声问题,首先要明确滤波电容器振动的产生机理。文中根据滤波电容器单元的实际结构,分析了电容器在高谐波运行状态下所承受的交变电场力,研究发现其电场力与电容器极板间电压的平方呈正比关系。为了研究滤波电容器单元的振动产生及传递过程,文中先对电容器心子振动进行了测量,发现电容器心子具有多个共振点,当电场力接近这些共振频率时,心子出现显著振动。另外 ...
李金宇 +5 more
doaj
Rare Metals, Volume 45, Issue 6, June 2026.ABSTRACT Nickel oxide (NiO)‐based electrodes with high theoretical specific capacitance can effectively increase the energy density of supercapacitors—the key factor limiting their practical deployment. However, several issues still restrict the production of advanced NiO‐based electrodes.
Ya‐Min Feng +10 more
wiley +1 more source
Gaoya dianqi, 2018 为查明某换流站交流滤波器断路器均压电容器径向击穿的故障原因,利用ATP/EMTP对换流站第四大组交流滤波器进行建模,同时考虑均压电容器电容分布及外部污秽的影响,计算故障均压电容器绝缘筒内外壁电位差、故障点与断路器静触头电位差。仿真结果表明:均压电容器壁厚不足和外部污秽是导致径向击穿的根本原因。最后,采用三维有限元法仿真计算均压电容器内外电场分布,提出增加均压电容器壁厚或改用瓷外套均压电容器的整改方案。
黄和燕 +5 more
doaj
Rare Metals, Volume 45, Issue 5, May 2026.ABSTRACT Additive manufacturing, commonly referred to as three‐dimensional (3D) printing, provides the geometric freedom and multi‐material integration needed to build soft medical robots for minimally invasive interventions, prosthetics, and rehabilitation.
Yao Wang +5 more
wiley +1 more source
Gaoya dianqi, 2019 高压直流输电系统换流站中滤波电容器可听噪声问题受到日益关注。滤波电容器的可听噪声与其电场力激励和自身机械性能有关。在实际运行过程中,滤波电容器流过大量谐波电流,使得电容器内部心子温度升高,温度的变化会对电容器振动过程中的激励及机械性能产生影响。对此,文中开展了滤波电容器心子温度对可听噪声特性的影响研究,旨在全面认识影响电容器运行噪声的特性的因素。文中通过测量不同运行温度下电容器的噪声声功率级,发现电容器运行温度变化会影响电容器噪声的辐射。随着电容器运行温度的升高,声功率级有增大的趋势,尤其在10～40 ...
雷晓燕 +4 more
doaj