Results 11 to 20 of about 132,908 (141)

工艺参数对等离子弧沉积316l不锈钢形貌及组织的影响

open access: yes, 2020
以316L不锈钢粉末为原料,采用等离子弧沉积技术在高沉积速率下获得了致密无缺陷的单道试样。首先研究了沉积电流、扫描速度、送粉速度与沉积层高度、沉积层宽度、沉积角之间的关系,然后对沉积试样的微观组织和组成成分进行了检测与分析。结果表明:沉积角随着送粉速度的增大而增大,随着沉积电流的增大而减小;沉积角主要是锐角,有利于试样的沉积;沉积电流对沉积层宽度的影响最大,扫描速度对沉积层高度的影响最大,稀释率随着扫描速度的增大而减小,随着沉积电流的增大而增大,随送粉速度增大而减小;沉积试样成分均匀 ...
李世硕   +13 more
core   +1 more source

Hierarchically Structured Zn‐ZnO@HA/PCL Biocompatible Coating: Enabling Controlled Degradation and Mechanical Stability of Magnesium Alloy Bone Implants

open access: yesRare Metals, Volume 45, Issue 11, November 2026.
ABSTRACT Biodegradable magnesium alloys are limited in orthopedic applications due to their rapid corrosion and poor interfacial stability. In this work, a composite coating is constructed via magnetic filtered cathodic vacuum arc (MFCVA) deposition of a Zn interlayer, followed by hydrothermal in situ generation of ZnO to induce hydroxyapatite (HA ...
Chao Zhang   +9 more
wiley   +1 more source

From Solvation Structure to Dendrite‐Free Deposition: A Discussion on the Spatially Anion‐Confined Electrolyte Strategy

open access: yesRare Metals, Volume 45, Issue 11, November 2026.
Abstract Anode‐free sodium metal batteries (AFSBs) are regarded as a promising candidate for the next‐generation high‐specific‐energy storage systems due to their high energy density and simple preparation process. However, their practical application is limited by issues such as sodium dendrite growth, bulk transport‐desolvation mismatch, increased ...
Yaru Wang   +7 more
wiley   +1 more source

沉积温度对电子束物理气相沉积制备YBCO薄膜性能与结构的影响

open access: yes, 2013
采用力学研究所自主研制的多元电子束物理气相沉积系统两步法生长YBCO薄膜。所用衬底为{001}LaAlO_3(简称LAO)单晶,尺寸为15mm×15mm,厚度为0.5mm。蒸发源选用Y,BaF_2和Cu,其纯度均高于99%。电子束蒸镀时衬底温度分别为室温、300℃和600℃。研究了不同沉积温度对YBCO薄膜结构、表面形貌及超导性能的影响。X射线衍射(XRD ...
马月芬   +6 more
core   +2 more sources

Phosphate‐Mediated FeNi Cocatalyst Bonding on BiVO4 Photoanodes for Synergistic Interfacial Charge Separation and Surface Water Oxidation

open access: yesRare Metals, Volume 45, Issue 11, November 2026.
ABSTRACT Bismuth vanadate (BiVO4) has emerged as a promising photoanode for photoelectrochemical (PEC) water splitting, but its efficiency is severely limited by rapid charge recombination and sluggish water oxidation kinetics. Herein, we demonstrated that depositing an amorphous nickel‐iron phosphate (NiFePOx) layer on BiVO4 could promote the surface ...
Li Xu   +10 more
wiley   +1 more source

Overdischarge Induced Porous Graphite for Upcycling of Spent Lithium‐Ion Batteries

open access: yesRare Metals, Volume 45, Issue 11, November 2026.
ABSTRACT The upcycling of spent lithium‐ion batteries (LIBs) into high‐performance materials offers both economic and environmental benefits. In this study, the principle of battery discharge‐induced copper dissolution and deposition is applied to fabricate a graphite/nanocopper composite anode.
Yadong Wang   +13 more
wiley   +1 more source

Progress and Future Prospect of Electrolyte Additives in Aqueous Zinc‐Ion Battery

open access: yesRare Metals, Volume 45, Issue 11, November 2026.
ABSTRACT Aqueous zinc‐ion batteries (AZIBs) have been regarded as a strong candidate for a new generation of electrochemical energy storage systems because of their high safety, environmental friendliness, low cost and relatively high energy density. However, there are still many challenges for practical application, especially the uncontrolled growth ...
You‐Cun Bai   +2 more
wiley   +1 more source

基于分形孔隙模型的含天然气水合物沉积物电阻率数值模拟

open access: yes, 2018
电阻率法是确定天然气水合物(以下简称水合物)饱和度的重要方法,通过数值模拟可以有效研究含水合物沉积物的电阻率特性,但过去构建的孔隙模型由于约束条件较少,而与实际的孔隙结构存在着较大的差异。为此,基于自然界沉积物具有自相似特征,选定地毯总边长为3和颗粒边长为1的谢尔宾斯基地毯作为沉积物的分形孔隙模型,根据等效电阻网络模式建立了含水合物沉积物的电导模型,并利用上述模型分析了孔隙度、孔隙水电导率、沉积物骨架电导率等因素对含水合物沉积物电阻率与水合物饱和度关系的影响。研究结果表明:(1 ...
陈玉凤   +3 more
core   +5 more sources

Enhanced Corrosion Resistance in an Additively Manufactured Copper Alloy via Suppressed Segregation

open access: yesRare Metals, Volume 45, Issue 10, October 2026.
ABSTRACT This study elucidates the corrosion behavior of C18150 Cu–Cr–Zr alloy fabricated by laser powder bed fusion (LPBF) in comparison with a conventional wrought baseline representative of industrial Cu–Cr–Zr plate products, highlighting the superior corrosion resistance of the additively manufactured condition.
Yang Qi   +4 more
wiley   +1 more source

Synergistic Grain Refinement and Crystal Plane Reconstruction via Shot‐Peening for Highly Reversible Zn Anodes

open access: yesRare Metals, Volume 45, Issue 10, October 2026.
ABSTRACT Aqueous Zn‐ion batteries (AZIBs) are expected to become one of the most promising candidates for large‐scale energy storage, but are impeded by uncontrollable dendrite growth and parasitic reactions. In this study, we propose a simple mechanical shot‐peening (SP) approach for restructuring commercial Zn foils into highly exposed (002)‐textured
Xu Ma   +7 more
wiley   +1 more source

Home - About - Disclaimer - Privacy