Results 11 to 20 of about 678,523 (71)

生物质灰熔融电容测试实验研究

open access: yes, 2017
提出一种利用电容测量生物质灰渣熔融状态的方法,以低熔点的玉米芯灰为样品进行测试,并与X射线荧光分析(XRF)、X射线衍射分析(XRD)、热重-差热分析(TG-DSC)结果进行比较.实验结果表明:玉米芯灰样在600-1000℃加热过程中质量的减少主要由灰分中KCl随加热过程挥发所致,并影响灰熔融温度预测结果;灰样烧结温度为800-900℃,电容测试结果为825℃,TG-DSC测试结果为875℃,灰熔点仪测试结果为990℃.电容测量结果与灰样熔融结渣情况一致,电容变化可准确反映灰样相变情况 ...
周肇秋   +5 more
core   +4 more sources

垃圾焚烧飞灰的熔融特性研究

open access: yes, 2005
以飞灰从开始熔融到熔渣全变成液体这一过程中的4个温度段所得到的熔渣为研究对象,探讨了它们的外观结构、成分、浸出毒性以及液固比、浸取液的pH值对熔渣中Ba、Cd、Ni等重金属浸出量的影响规律.结果表明:飞灰开始熔融后,随着温度的升高,熔渣的颜色逐渐变深、质地逐渐变硬、玻璃化现象逐渐明显,Ca、Al、Mg、K、Fe等主量元素的质量百分含量逐渐升高;熔融温度在1230℃以上所得到的熔渣不再是具有浸出毒性的危险废物;液固比对Ba、Zn、Cd和Ni的浸出量影响较大,而对As的影响较小;Ba、Cu ...
赵光杰   +6 more
core   +5 more sources

垃圾焚烧灰渣的熔融物理化学特性分析

open access: yes, 2002
对垃圾焚烧灰渣的熔融物理化学特性研究,为合理应用和发展垃圾焚烧技术以及对灰渣的熔化处理和有效利用提供基础。本研究对目前运行的不同垃圾焚烧技术进行灰渣采样,系统分析垃圾灰渣的熔融物理化学特性的变化相互,工给出灰渣流动温度和软化温度的拟合公式 ...
阎常峰, 林伯川
core   +5 more sources

电场对CaO-SiO2-Al2O3熔渣的结构调控

open access: yes, 2020
针对硅中硼难去除的问题,从熔渣结构层面进行研究,通过观察熔渣不同部位在不同电场条件下熔渣结构的变化,分析不同电场条件下高温骤冷所得熔渣结构变化,探索引入电场对熔渣结构影响。结果表明,引入电场会引起熔渣中离子定向移动与重新分配,改变熔渣结构。熔渣上部结构在电场作用下解聚更彻底,远离渣金界面处熔渣结构变化较小。电场增强有利于熔渣解聚,电场强度达10V时,熔渣中结构单元会转变为聚合度更低的Q0结构单元。熔渣上部结构对电场变化更敏感,电场改变 ...
王志   +4 more
core  

Effect of Slag Ingredient on Ti Burning Loss Rate and Ingot Surface Quality of High Temperature Alloy 0Cr15Ni25Ti2MoAlVB

open access: yesTeshugang, 2006
Ti burning loss rate during electroslag remelting(ESR)of alloy 0Cr15Ni25Ti2MoAlVB in a 2.5 t ESR furnace by 4 kinds of slag systems was tested and analyzed.The test results showed that as remelting using 75%CaF2-15%Al2O3-10%CaO pure terary slag the Ti ...
赵鸿燕
doaj  

Mathematical Model of Electrode Immersing Depth in 2.3t Electro-Slag Ingot Remelting Process and Application

open access: yesTeshugang, 2017
The value of slag resistance in ESR stable melting condition with different electrode immersing depth is obtained by simulation using MHD ( magneto-hydrodynamics) module of Software Fluent, and the mathematical model of electrode immersing depth is ...
曲明磊   +5 more
doaj  

Effect of Argon Shielding Atmosphere on Burning Loss of Titanium in Steel lCrl8Ni9Ti in Electro-Slag Remelting Process

open access: yesTeshugang, 2015
The pilot production of austenite stainless steel 1Cr18Ni9Ti [/%: 0. 05 ~0. 09C, 17. 13 ~ 18. 24Cr, 9. 73 ~ 10. 6Ni, 5 X (C-0. 02) ~0. 80Ti] remelting by 1. 2 t electro-slag furnace in normal atmospheric gas and by 5.
邓鹏辉, 周立新, 潘明旭, 张洲
doaj  

Numerical Simulation of Effect of Electrode Filling Ratio on Electroslag Remelting Process

open access: yesTeshugang, 2014
The distribution of magnetic field and Joule heat field of electrode, slag and remelting ingot system during electroslag remelting (ESR) process is obtained by using finite element software ANSYS, and the effect of electrode filling ratio 0. 3 ~ 0.
贺铸   +4 more
doaj  

Progress of Research on Interfacial Properties of Fluoride-Containing Slag System for Electroslag Remelting

open access: yesTeshugang, 2014
The electroslag remelting (ESR) process of steel mainly occurs in formation period of electrode-end melting drop, and the molten steel is pured and cleaned by slag washing effect as the inclusions in steel are absorbed and solved by slag, while the ...
曹玉龙, 姜周华
doaj  

Analysis on Internal Cracks in Fe-Cr-Al Alloy Electroslag Remelting Ingot and Improved Process Measure

open access: yesTeshugang, 2014
The effect of structure of electroslag remelting (ESR) mold, cooling intensity t voltage, current and slow- cooling method on internal cracks of 200 kg ESR ingot of Fe-Cr-Al alloy (/%: 0. 024C, 0. 26Si, 0. 17Mn, 20.1Cr, 5. 3Al, 0.
白李国   +4 more
doaj  

Home - About - Disclaimer - Privacy