Results 131 to 140 of about 3,261,533 (299)

Enhancing Corrosion Resistance and Mechanical Strength of 3D‐Printed Iron Polylactic Acid for Marine Applications via Laser Surface Texturing

Advanced Engineering Materials, EarlyView.
Laser surface texturing significantly improves the corrosion resistance and mechanical strength of 3D‐printed iron polylactic acid (Ir‐PLA) for marine applications. Optimal laser parameters reduce corrosion by 80% and enhance tensile strength by 25% and ductility by 15%.
Mohammad Rezayat, Mojtaba Karamimoghadam, Mohammadreza Lalegani Dezaki, Ali Zolfagharian, Giuseppe Casalino, Antonio Mateo, Mahdi Bodaghi   +6 more
wiley   +1 more source

Oxygen application to chloride leaching of complex sulfide ores [PDF]

, 1987
The study investigates leaching of complex sulfide ores with simultaneous regeneration of the leaching solution and removal of dissolved iron to balance the iron concentration in the leaching process.
Chou, Kuo Tung
core  

Adjustment of Coatings Morphology and Particle Distribution of Layered Silicates by Freeze‐Drying for Improved Gas Barriers

Advanced Engineering Materials, EarlyView.
Freeze‐drying of layered silicate is the key to get coatings with superior gas barrier. Freeze‐drying of layered silicates modified with dodecylamine (DDA) is a highly effective technique for the preparation of barrier pigments that significantly mitigate the permeation of oxygen, water vapor, and hydrogen through polymer films containing these ...
Joshua Lommes, Moritz Bätcher, Andrea Deißenberger, Volkmar Stenzel, Andreas Hartwig   +4 more
wiley   +1 more source

Model compounds of humic acid and oxovanadium cations. Potentiometric titration and EPR spectroscopy studies

Journal of the Brazilian Chemical Society, 1999
The stability constants and the isotropic EPR parameters Ao (hyperfine splitting constant) and g o (g value) were obtained by potentiometric titrations and EPR spectroscopy, respectively, of 85%v/v aqueous solutions of model compounds of humic acids ...
Mercê Ana Lucia Ramalho, Spir Ivana Helena Zamuner, Oruña Salmón Maria José, Giannoni Ricardo Alberto, Mangrich Antonio Sálvio   +4 more
doaj  

The Impact of High‐Productivity Processing on the Fatigue Failure of an Additive Manufactured Superalloy HAYNES 282

Advanced Engineering Materials, EarlyView.
The low cycle fatigue life of additive manufactured HAYNES® 282® superalloy was investigated for conventional and high‐productivity processing: samples of the former lasted 1400–1700 cycles, while samples of the latter failed at ~ 1200 cycles, at 760 °C and 1% strain.
Abdul Shaafi Shaikh, Ahmed Fardan, Tatiana Mishurova, Eduard Hryha   +3 more
wiley   +1 more source

Evaluación del efecto corrosivo de los crudos pesados sobre el Acero 5Cr-1/2Mo utilizado en las unidades de destilación

Revista Fuentes El Reventón Energético, 2008
The heavy crude oil containing a high percentage of organic acids and sulfur, which at high temperatures and flow rates, resulting in corrosive furnaces, towers and lines transfer distillation units.
Darío Yesid Peña Ballesteros, Jose Anibal Serna, Raul Gonzalez   +2 more
doaj  

Hydrogen transfer reactions of indoles [PDF]

, 1974
Rzepa, Henry Stephen, Rzepa, Henry Stephen   +1 more
core   +1 more source

Duplex Stainless Steel Laser‐Surface Textured: Stability in Brine Solution

Advanced Engineering Materials, EarlyView.
Controlled laser‐surface treatment (LST) of duplex DSS2205 steel is performed to increase its stability in brine solution under cyclic electrochemical assays. The superior protection with respect to flat and smooth panels is attributed to the presence of FeCr2O4 as the main protective oxide layer in the LST surface, after corrosion tests. The stability
Mohammad Rezayat, Hamidreza Enshaei, Elaine Armelin, José I. Iribarren, Antonio Mateo, Miguel Morales   +5 more
wiley   +1 more source

Microstructural Evolution and Vacancy Defect Formation in Mn–Mo–Ni RPV Steel Under Low Cycle Fatigue: Insights From EBSD and PALS

Advanced Engineering Materials, EarlyView.
Low‐cycle fatigue damage in Mn–Mo–Ni reactor pressure vessel steel is examined using a combined electron backscatter diffraction and positron annihilation lifetime spectroscopy approach. The study correlates texture evolution, dislocation substructure development, and vacancy‐type defect formation across uniform, necked, and fracture regions, providing
Apu Sarkar, Dhanadeep Dutta, G. Bharat Reddy   +2 more
wiley   +1 more source

Spectrophotometric determination of aqueous acidity constants of three azo dyes

Open Chemistry, 2010
Alizadeh Kamal, Rezaei Behrooz, Maddah Bozorgmehr   +2 more
doaj   +1 more source