Results 111 to 120 of about 706,826 (277)

Increased Cycling Efficiency and Rate Capability of Copper-coated Silicon Anodes in Lithium-ion Batteries

, 2011
Cycling efficiency and rate capability of porous copper-coated, amorphous silicon thin-film negative electrodes are compared to equivalent silicon thin-film electrodes in lithium-ion batteries. The presence of a copper layer coated on the active material
Kowolik, Kristin, Sethuraman, Vijay A., Srinivasan, Venkat   +2 more
core   +1 more source

Overcoming data scarcity of active layer thicknesses using geophysics

, 2018
The thermal imprint of a typical river in the continuous permafrost of Central Yakutia (Siberia, Russia) is studied by active layer thickness measurements along six cross sections, either directly or with geophysical methods. Ground-Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) measurements provide permafrost depths comparable to ...
Saintenoy, Albane, Pohl, Eric, Grenier, Christophe, Séjourné, Antoine, Khristoforov, Ivan, Konstantinov, Pavel, Danilov, Kencheeri, Bazhin, Kirill, Fedorov, Alexander   +8 more
openaire   +1 more source

Facilitating Expedited Drug Approval—the Past, Present, and Future of Clinical Trials for Pediatric Rheumatic Disease

Arthritis Care &Research, EarlyView.
Pamela F. Weiss, Hermine I. Brunner
wiley   +1 more source

A Thermodynamic 3D Model for the Simulation of Diffusion‐Controlled Alloying Processes in Heterogeneous Material Structures

Advanced Engineering Materials, EarlyView.
A numerical model resulting from irreversible thermodynamics for describing transport processes is introduced, focusing on thermodynamic activity gradients as the actual driving force for diffusion. Implemented in CUDA C++ and using CalPhaD methods for determining the necessary activity data, the model accurately simulates interdiffusion in aluminum ...
Ulrich Holländer, Leonhard Holländer, André Langohr, Hans Jürgen Maier   +3 more
wiley   +1 more source

SiGeC Near Infrared Photodetectors [PDF]

, 2002
A near infrared waveguide photodetector in Si-based ternary Si₁âxâyGexCy alloy was demonstrated for 0.85~1.06 µm wavelength fiber-optic interconnection system applications.
Chua, Soo-Jin, Fitzgerald, Eugene A., Leitz, Christopher W., Li, Baojun, Miao, Lingyun   +4 more
core  

Characterization of Nitinol Produced by Laser Powder Bed Fusion for Mechanical Metamaterial Applications

Advanced Engineering Materials, EarlyView.
Stabilization of L‐PBF Ni50.7Ti49.3 under low‐cycle loading was investigated. Recoverable strain after cycling was dependent on the amount of applied load. Recovery ratio was 53.4% and 35.1% at intermediate and high load, respectively. The maximum total strain reached 10.3% at a high load of 1200 MPa.
Ondřej Červinek, Jakub Hurník, Miroslav Šmíd, Ondřej Zobač, Melanie Todt, Daniel Koutný   +5 more
wiley   +1 more source

Combining a climate-permafrost model with fine resolution remote sensor products to quantify active-layer thickness at local scales

Environmental Research Letters
Quantification of active-layer thickness (ALT) over seasonally frozen terrains is critical to understand the impacts of climate warming on permafrost ecosystems in cold regions.
Caiyun Zhang, Thomas A Douglas, David Brodylo, Lauren V Bosche, M Torre Jorgenson   +4 more
doaj   +1 more source

Impact of heavy ions on a-Si:H/PolySi bilayer thin film transistors with Schottky barrier source and drain based on Nickel Silicide

Memories - Materials, Devices, Circuits and Systems
This study investigates the influence of heavy ion irradiation on thin film transistors (TFTs) based on an a-Si:H/PolySi active layer and Schottky barrier-based source and drain.
Deepak K. Sharma, Vivek Kumar
doaj   +1 more source

Gain and time resolution of 45 $\mu$m thin Low Gain Avalanche Detectors before and after irradiation up to a fluence of $10^{15}$ n$_{eq}$/cm$^2$

, 2017
Low Gain Avalanche Detectors (LGADs) are silicon sensors with a built-in charge multiplication layer providing a gain of typically 10 to 50. Due to the combination of high signal-to-noise ratio and short rise time, thin LGADs provide good time ...
Carulla, M., Cavallaro, E., Chytka, L., Davis, P. M., Flores, D., Förster, F., Grinstein, S., Hidalgo, S., Komarek, T., Kramberger, G., Lange, J., Mandić, I., Merlos, A., Nozka, L., Pellegrini, G., Quirion, D., Sykora, T.   +16 more
core   +1 more source

Reduction of Oxide Inclusions During the High‐Frequency Welding of Steel via a Nonthermal Ar/H2 Plasma Jet

Advanced Engineering Materials, EarlyView.
High‐frequency (HF) welding of steel is limited by oxide inclusions that degrade weld quality. This study demonstrates, for the first time, the integration of a nonthermal Ar/H2 dielectric barrier discharge (DBD) plasma jet into HF welding. Local plasma treatment provides effective shielding and in‐situ oxide reduction, resulting in markedly fewer and ...
Viktor Udachin, Lienhard Wegewitz, René Gustus, Henning Wiche, Wolfgang Maus‐Friedrichs   +4 more
wiley   +1 more source