Results 21 to 30 of about 3,711 (181)

Numerical investigation of the air-side performance of louver fin-and-tube radiators having rectangular, tapered and airfoil section configuration

open access: yesEnergy Reports, 2022
As the most widely used type in automobile industry, louver fin-and-tube radiator plays an important role in maintaining the stable operation of automobile.
Xiang Zhang   +5 more
doaj   +1 more source

Strategies for Controlling Emission Anisotropy in Lead Halide Perovskite Emitters for LED Outcoupling Enhancement. [PDF]

open access: yesAdv Mater
The rise of lead halide perovskite semiconductors has enabled high‐performance LEDs with internal quantum efficiencies approaching 100%. In order to further enhance the external quantum efficiencies limited by light outcoupling effects, in this account, the strategies for reducing energy dissipation through the substrate, waveguide, and evanescent ...
Marcato T, Kumar S, Shih CJ.
europepmc   +2 more sources

Effect of the segmented fin height on the air-side performance of serrated welded spiral fin-and-tube heat exchangers

open access: yesCase Studies in Thermal Engineering, 2022
Serrated welded spiral fin-and-tube heat exchangers (SWSFTHXs) are experimentally investigated. The work primarily focuses on the effects of the segmented fin height (hs) with various fin pitches (fp) on the air-side performance (ASP).
Thawatchai Keawkamrop   +5 more
doaj   +1 more source

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

open access: yesEnergies, 2022
A three-dimensional numerical investigation of turbulent heat transfer and fluid flow characteristics of the new heat exchanger and self-support of a rectangular converging-diverging (SS-RCD) tube bundle heat exchanger with different inserts was ...
Feng Jiao   +3 more
doaj   +1 more source

Single-phase laminar flow heat transfer from confined electron beam enhanced surfaces [PDF]

open access: yes, 2015
An experimental investigation of the thermal-hydraulic characteristics for single-phase flow through three electron beam enhanced structures was conducted with water at mass flow rates from 0.005 kg/s to 0.045 kg/s.
Arben Ferhati   +7 more
core   +2 more sources

Modeling and Dynamic Simulation of a Hybrid Liquid Desiccant System with Non-Adiabatic Falling-Film Air-Solution Contactors for Air Conditioning Applications in Buildings

open access: yesEnergies, 2021
This paper presents an experimentally validated, dynamic model of a hybrid liquid desiccant system. For this purpose, we developed new components for the air-solution contactors, which are of the non-adiabatic falling-film type with horizontal tubes ...
Juan Prieto   +2 more
doaj   +1 more source

Slot-Ring Multiport Driven Antenna with Improved Airside Radiation for Terahertz Communications [PDF]

open access: yes
A slot-ring multiport driven (MPD) antenna is evaluated for operation in the terahertz band with emphasis on air-side radiation on a thick Indium Phosphide (InP) substrate.
Alharbi, Khalid   +3 more
core   +1 more source

Ground Movement Tracking System for Airside Operations using Global Navigation Satellite System (GNSS) and Long Range (LoRa) Communication

open access: yesAviation Electronics, Information Technology, Telecommunications, Electricals, Controls
Accurate monitoring of ground vehicle and aircraft movement in the airport airside is essential to reduce the risk of incidents caused by limited coordination between controllers, pilots, and ground operators.
Cokorda Dwija Wisnuardana   +2 more
doaj   +1 more source

Development of In Situ Refrigeration Cycle Measurement Method Using Air-Side Data of Air Source Heat Pump

open access: yesApplied Sciences, 2023
The refrigeration cycle of an air source heat pump system is an important information that reveals critical operating data, such as the cooling capacity, power consumption, and performance of a system during operation. Operating data, such as refrigerant
Han-Gyeol Lee   +2 more
doaj   +1 more source

Thermal performance of automotive radiators made of plastic and stainless steel microtubes

open access: yesCase Studies in Thermal Engineering
The thermal performance of low-temperature radiators constructed from staggered banks of stainless steel microtubes (SST unit) and polymeric fibers (PF unit, polyamide 612) was investigated in air cross-flow conditions.
Ilja Astrouski   +4 more
doaj   +1 more source

Home - About - Disclaimer - Privacy