Results 201 to 210 of about 51,635 (273)

Corrosion behavior of borided AISI 304 austenitic stainless steel

Anti-Corrosion Methods and Materials, 2014
Purpose – The paper aims to clarify the effect of boriding on the corrosion behavior and mechanical properties of AISI 304 austenitic stainless steel. Design/methodology/approach – The commercially available steel was subjected to a boriding treatment with Ekabor ...
Karakas, Mustafa Serdar, Calik, Adnan, KURT, BÜLENT, GÜNEN, ALİ   +3 more
openaire   +3 more sources

Dynamic recrystallization behavior of AISI 304 stainless steel

Materials Science and Engineering: A, 2001
Abstract The dynamic recrystallization (DRX) of AISI 304 stainless steel was studied with torsion test in the temperature range of 900–1100°C and the strain rate range of 5.0×10 −2 –5.0×10 0 s −1 . The initiation and evolution of DRX were investigated with microstructural analysis and then the critical strain for DRX initiation could be confirmed by
Sung-Il Kim, Yeon-Chul Yoo
openaire   +1 more source

Failure analysis of AISI 304 stainless steel shaft

Engineering Failure Analysis, 2008
Abstract In this paper, we present a failure analysis methodology of a structural component using a conventional 14-step failure analysis approach. This failure analysis methodology focused on observation, information gathering, preliminary visual examination and record keeping, nondestructive testing, mechanical testing, selecting/preservation of ...
R.W. Fuller, J.Q. Ehrgott, W.F. Heard, S.D. Robert, R.D. Stinson, K. Solanki, M.F. Horstemeyer   +6 more
openaire   +1 more source

Surface microstructure and property modifications in AISI 304 stainless steel induced by pseudospark pulsed electron beam treatments

, 2021
In this paper, the modifications of microstructure, mechanical properties and corrosion behaviors of AISI 304 austenite stainless steel treated by pseudospark pulsed electron beam (PSPEB) with different number of pulses were investigated. PSPEB is a high
Xiaotong Cao, Jing Hu, W. Huo, Xuecheng Xi, Wansheng Zhao   +4 more
semanticscholar   +1 more source

Microbiologically influenced corrosion of welded AISI 304 stainless steel pipe in well water

Engineering Failure Analysis, 2020
This work analyzes the premature corrosion failure of a welded AISI 304 stainless steel (SS) pipe network in well water (WW) for 6 months. Laboratory tests were performed to analyze the corrosion behavior and to identify and distinguish the genera of ...
J. Ress, G. Monrrabal, A. Diaz, J. Pérez-Pérez, J. Bastidas, D. Bastidas   +5 more
semanticscholar   +1 more source

Super-hydrophobicity and corrosion resistance of laser surface textured AISI 304 stainless steel decorated with Hexadecyltrimethoxysilane (HDTMS)

, 2020
Stainless steel (SS) has long been widely used in the outdoor environment as engineering material due to its excellent corrosion resistance. Recently it is found that super-hydrophobicity on the stainless steel surface also has significant effect on its ...
Luxia Zhang, N. Lin, J. Zou, Xiuzhou Lin, Zhiqi Liu, Shuo Yuan, Yuan Yu, Zhenxia Wang, Qunfeng Zeng, Wengang Chen, Linhai Tian, L. Qin, Ruizhen Xie, Boqiong Li, Zhihua Wang, B. Tang, Yucheng Wu   +16 more
semanticscholar   +1 more source

Cold rolling texture in AISI 304 stainless steel

Materials Science and Engineering: A, 2004
Evolution of texture during cold rolling of austenitic AISI 304 stainless steel is presented here. The annealed steel plate has been unidirectionally cold rolled up to 90% reductions under two different rolling conditions. Effect of rolling conditions on transformation of austenite to strain-induced α′ martensite phase and evolution of texture in both ...
B.Ravi Kumar, A.K Singh, Samar Das, D.K Bhattacharya   +3 more
openaire   +1 more source

Characteristics of Duplex Treated AISI 304 Stainless Steel

Key Engineering Materials, 2013
The duplex treatment consisted of a plasma nitriding at 470 °C for 4 h and subsequent coating with TiN layer was applied on AISI 304L stainless steel. The article is concerned to a study of the chemical composition and mechanical properties of duplex system.
Zdenek Joska, Jaromir Kadlec, Vojtěch Hruby, Zbynek Studeny, Tomas Binar   +4 more
openaire   +1 more source

Corrosion Characterization of AISI 304 Stainless Steel Filter

Materials Science Forum, 2018
Pre-sintering for removal of lubricants is one of the most important steps in processing of powder metallurgy materials to achieve corrosion resistance. This is often the most neglected step in the sintering process. Incomplete removal of these organic compounds may result in sensitization of sintered parts.
Lusinete Pereira Barbosa, Olandir Vercino Correa, N. Karsokas Filho, Isolda Costa   +3 more
openaire   +1 more source

Microwave plasma nitrided austenitic AISI-304 stainless steel

Surface and Coatings Technology, 1998
Abstract A microwave ( f = ω /2π=2.45 GHz) electron cyclotron resonance (ECR) plasma source was employed for low-temperature (350 °C) and low-pressure (3–4×10 −4  Torr) nitriding of AISI-304 stainless steel. Even for nitriding times as short as 40 min, the surface hardness was found to increase by up to six times the initial value, and the nitrogen ...
E. Camps, S. Muhl, S. Romero, J.L. Garcı́a   +3 more
openaire   +1 more source