Results 211 to 220 of about 51,635 (273)
Some of the next articles are maybe not open access.
Dissimilar Welding between AISI 304 Stainless Steel and AISI 1020 Carbon Steel Plates
Applied Mechanics and Materials, 2012Abstract. This work studied the feasibility of dissimilar welding between AISI 304 stainless steel and AISI 1020 carbon steel plates with the thickness of 15 mm. The processes applied in this work were gas tungsten arc welding (GTAW) and shield metal arc welding (SMAW).
Wichan Chuaiphan +3 more
openaire +1 more source
Comparing the Formability of AISI 304 and AISI 202 Stainless Steels
Journal of Materials Engineering and Performance, 2011The formability of AISI 202 austenitic stainless steel was compared with that of type AISI 304 stainless steel. Type 202 is a low-nickel austenitic stainless steel alloyed with manganese and nitrogen. In this study, the formability of the two grades was examined using Erichsen cupping tests and room temperature uniaxial tensile tests performed at ...
Du Toit, Madeleine, Steyn, Herman G
openaire +2 more sources
Journal of Manufacturing Processes, 2019
A commercially pure aluminum 1060 tube flyer and an AISI 304 stainless steel bar were joined using various magnetic pulse welding parameters (discharge voltage, radial gap, overlap length).
Zhenyang Lu +5 more
semanticscholar +1 more source
A commercially pure aluminum 1060 tube flyer and an AISI 304 stainless steel bar were joined using various magnetic pulse welding parameters (discharge voltage, radial gap, overlap length).
Zhenyang Lu +5 more
semanticscholar +1 more source
Surface & Coatings Technology, 2019
High velocity oxy-fuel (HVOF) technique was used to deposit an Al2O3-30(Ni20Al) coating on AISI 304 stainless steel substrate to improve its corrosion and wear performance at high temperature. First, thermal cycling tests at 750 and 850 °C were conducted
N. Abu-warda +3 more
semanticscholar +1 more source
High velocity oxy-fuel (HVOF) technique was used to deposit an Al2O3-30(Ni20Al) coating on AISI 304 stainless steel substrate to improve its corrosion and wear performance at high temperature. First, thermal cycling tests at 750 and 850 °C were conducted
N. Abu-warda +3 more
semanticscholar +1 more source
On the feasibility of AISI 304 stainless steel laser welding with metal powder
, 2020Laser welding is a manufacturing process that allows the joining of metallic parts even if accurate positioning and preparation of the welding edges are mandatory for successful welding.
V. Errico +4 more
semanticscholar +1 more source
Evolution of dynamic recrystallisation in AISI 304 stainless steel
Materials Science and Technology, 2003AbstractThe nucleation and development of dynamic recrystallisation (DRX) has been studied via hot torsion testing of AISI 304 stainless steel. The DRX behaviour was investigated with microstructural analysis and slope changes of flow stress curves. The characteristics of serrated grain boundaries observed by SEM, electron backscattered diffraction and
S.-I. Kim +4 more
openaire +1 more source
, 2020
In this study of examination, the mechanical properties of AISI 304 stainless steel and copper fabricated by gas tungsten arc welding process (GTAW) are evaluated.
Gurdeep Singh, R. Saxena, S. Pandey
semanticscholar +1 more source
In this study of examination, the mechanical properties of AISI 304 stainless steel and copper fabricated by gas tungsten arc welding process (GTAW) are evaluated.
Gurdeep Singh, R. Saxena, S. Pandey
semanticscholar +1 more source
Optics and Laser Technology, 2019
Recently, laser beam welding of austenitic stainless steel and mild steel has received great attention in industry due to its wider application in petroleum refinement stations, power plants, pharmaceutical industry and also in households. In this study,
P. Pankaj +3 more
semanticscholar +1 more source
Recently, laser beam welding of austenitic stainless steel and mild steel has received great attention in industry due to its wider application in petroleum refinement stations, power plants, pharmaceutical industry and also in households. In this study,
P. Pankaj +3 more
semanticscholar +1 more source
, 2020
This research investigates wear morphology of a Ti(C,N)-based cermet tools used for the high-speed dry turning of austenitic stainless steel (AISI 304) specifically for finishing operation.
Uttkarsh Patel +3 more
semanticscholar +1 more source
This research investigates wear morphology of a Ti(C,N)-based cermet tools used for the high-speed dry turning of austenitic stainless steel (AISI 304) specifically for finishing operation.
Uttkarsh Patel +3 more
semanticscholar +1 more source
Materials Today: Proceedings, 2019
The weld joint is always the failure point in the arc welding of dissimilar metals due to microstructural heterogeneity. In this work, the microstructure and corrosion performance of gas metal arc weld (GMAW) joints between AISI 304 stainless steel (SS ...
T. Abioye +4 more
semanticscholar +1 more source
The weld joint is always the failure point in the arc welding of dissimilar metals due to microstructural heterogeneity. In this work, the microstructure and corrosion performance of gas metal arc weld (GMAW) joints between AISI 304 stainless steel (SS ...
T. Abioye +4 more
semanticscholar +1 more source