Results 91 to 100 of about 899 (209)

X-Ray Tests of AISI 430 and 304 Stainless Steels and AISI 1010 Low Carbon Steel Welded by CO₂ Laser beam welding

Materials Testing, 2011
Abstract For this study, X-Ray radiographic tests of AISI 430 and 304 stainless steels with AISI 1010 low-carbon steels welded by CO2 Laser beam welding (LBW) have been performed. Laser beam welding experiments were carried out under argon and helium shielding gas, at 2000–2250 and 2500 W heat input and 100-200-300 cm/min welding speeds.
Taskin, Mustafa, Caligulu, Ugur, Turkmen, Mustafa   +2 more
openaire   +3 more sources

Simulación de juntas soldadas a tope por gtaw en placas planas de acero inoxidable AISI 430 mediante software ANSYS. [PDF]

, 2022
En el capítulo 1 para la caracterización de juntas soldadas a tope por GTAW en placas planas de 3mm de espesor de acero inoxidable AISI 430, se recopila y revisa información bibliográfica acerca de juntas soldadas a tope, información acerca de los aceros
Cuestas Revelo, Hipatia Abigail
core  

Pengaruh Implantasi Ion Argon pada Struktur Mikro dan Kekerasan Baja Aisi 430 untuk Bahan Struktur Reaktor [PDF]

, 2016
EFFECTSOF Ar-ION IMPLANTATION ON MICROSTRUCTURE AND HARDNESS OF AISI 430 STEEL FOR REACTOR STRUCTURE MATERIAL. Surface engineering by using implantation technique of argon (Ar+) ion may improve the performance ofmaterials especially the hardness. TheAISI
Parikin, P. (Parikin), Ismoyo, A. H. (Agus), Bandriyana, B. (B)   +2 more
core  

Optimization of austenitic and ferritic steels for deep drawing. Part 1: metallurgical and mechanical analyses.

Fracture and Structural Integrity
Deep drawing of stainless steels thin sheets is a cold forming process used to produce components with complex geometries at limited costs. Although it seems a simple shaping technique, this technology requires a high level of know-how, essential to ...
Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Gerosa, Barbara Rivolta   +4 more
doaj   +3 more sources

Increasing the strength of AISI 430 ferritic stainless steel by static strain ageing

, 2009
In this study, the strain ageing behaviour of AISI 430 ferritic stainless steel is investigated. A certain part of the as-received ferritic stainless steel test pieces was pre-strained for 5 % in tension, then aged at 100, 200, 300, and 400 degrees C for
Gunduz, S., Kacar, R.
core  

Study on Electrochemical Behavior at a Room and High Temperature at 700 °C Corrosion of Austenite, Ferrite, and Duplex Stainless Steels

Metals
The stainless-steel phase of austenite, ferrite, and duplex was affected by the high temperature corrosion. So, the study of corrosion behavior in high temperatures at 700 °C is important because it is connected to life and maintenance. Various stainless
Dohyung Kim, Byung-Hyun Shin
doaj   +1 more source

AN INVESTIGATION ON JOINABILITY OF THE AISI 304 AND AISI 430 STAINLESS STEEL BY TIG, MIG AND SHIELDED METAL ARC WELDING METHODS

, 2010
In this study, AISI 430 ferritic stainless steel and AISI 304 austenitic stainless steel sheets with 3 mm thickness were joined by Tungsten Inert Gas (TIG), Metal Inert Gas (MIG) and shielded metal arc welding methods. Mechanical properties of the welded
Kaya, Yakup
core  

Investigation of the weldability of AISI 430 and HARDOX 500 steels by CMT method

Pamukkale University Journal of Engineering Sciences
In this study, AISI-430 and HARDOX 500 steels were welded with Cold Metal Transfer (CMT) welding technique, and the changes in the mechanical properties in the welding and HAZ (Heat Affected Zone) regions were investigated. 100x130x6 mm AISI 430 and HARDOX 500 steels were cut in standard sizes with a band saw and joined by the CMT method using AWS 307 ...
Kocadağistan, Mustafa Engin, Çinar, Oğuzhan   +1 more
openaire   +2 more sources

The weld-pool solidification mode of ferritic stainless steels

Metalurgija, 2012
The paper presents the analysis of solidification mode at gas tungsten arc welding (GTAW) of AISI 430 ferritic stainless steel. Two solidification modes (epitaxial and equiaxial) were discovered, which have a major influence on a weld tensile strength ...
J. Tušek, A. Lešnjak, M. Pleterski, D. Klobčar   +3 more
doaj  

Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium

Journal of Advanced Materials in Engineering, 2018
In order to improve the oxidation and hot corrosion resistance of steels, various elements including aluminum, chromium, silicon, titanium or combination of these elements can be diffused on to the surface of steel.
M. Mahmoudi Saleh Abad, M. Zandrahimi, H. Ebrahimi far   +2 more
doaj