Results 51 to 60 of about 347,352 (352)
, 2020 A comparative study was drawn for evaluating mechanical and tribological properties between as-cast, heat treated (HT) Functionally Graded (FG) A359/10 wt% B4C and homogenous A359/6 wt% B4C composites (wt% equivalent to FGM outer zone, determined by ...
N. Radhika +3 more
semanticscholar +1 more source
Advanced Engineering Materials, EarlyView.The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin +2 more
wiley +1 more source
Journal of King Saud University: Engineering Sciences, 2017 Aluminium (1xxx)/coconut shell micro particle (Al/CMP) composites have been developed using a compo cast technique. Coconut shells (CSs) were processed with the aid of mortar/pestle and disc grinder and then classified with a set of sieves vibrated with ...
Sefiu Adekunle Bello +2 more
doaj +1 more source
Heliyon, 2023 Powder Metallurgy (PM) was used to synthesize SiC (0, 5, 10, 15 & 20 wt%) and 1 wt% Yttria (Y2O3) reinforced aluminium (Al) metal matrix composites.
P.P. Shantharaman +6 more
doaj +1 more source
Studies on Aluminum – Iron ore in-situ Particulate Composite [PDF]
, 2010 Discontinuously reinforced aluminium matrix composites are fast emerging as engineering materials and competing with common metals and alloys. They are gaining significant acceptance because of higher specific strength, specific modulus and good wear ...
Singh, Akhilesh
core
Advanced Engineering Materials, EarlyView.This study examines how several molten high‐silicon electrical steels interact with both conventional and recycled MgO–C refractories. For this, various immersion experiments are conducted. In addition to infiltration, a number of mechanisms are identified and explained that control the corrosion of the refractory material.
Lukas Neubert +7 more
wiley +1 more source
EFFECTS OF ALUMINIUM REINFORCEMENT ON THE MECHANICAL AND MORPHOLOGICAL CHARACTERISTICS OF HIGH-DENSITY POLYETHYLENE COMPOSITES [PDF]
European Journal of Materials Science and EngineeringPolymer matrix composites (PMC) are prominent structural materials that offer a combination of some extra-ordinary properties, including light weight, high strength, high resistance to chemicals, etc.
FARUQUI A. Nayeem +3 more
doaj +1 more source
Experimental validity on the casting characteristics of stir cast aluminium composites
Journal of Materials Research and Technology, 2020 In the present work efforts are made to confirm the presence of actual weight percentage of reinforcements and its effect on aluminium alloy composites during stir casting technique. Two types of reinforcements, such as Silicon carbide and Boron carbide,
Gowrishankar M C +4 more
doaj +1 more source
, 2020 Due to the increasing demand for lighter materials with enhanced properties, the upgrade of techniques to improve the production of high-performance composite materials is of great interest in modern technology.
S. Akinwamide +4 more
semanticscholar +1 more source
Journal of Composites Science, 2023 Research efforts seek to develop aluminium alloy composites to enhance the poor tribological performance of aluminium alloy base matrix. In this research, a hybrid metal matrix composite (HMMC) was developed by reinforcing an aluminium alloy (AA8011 ...
Sameen Mustafa +3 more
semanticscholar +1 more source