Results 151 to 160 of about 1,306,707 (342)
Electron scattering and bremsstrahlung cross- section measurements [PDF]
, 1967 Electron transmission measurements for aluminum and gold, and backscattering measurements on targets of iron, tin, aluminum, and ...
Dance, W. E., Rester, D. H.
core +1 more source
Advanced Engineering Materials, EarlyView.The fused filament‐fabricated MAR‐M247 alloy without hot isostatic pressing shows the lowest porosity of 4%. Heat treatment at 1220 °C produces coarse precipitates and carbides. Specimens heat‐treated at 1220 °C exhibit higher tensile strength (683 MPa) and elongation (10%) at room temperature.
Haneen Daoud +7 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This work reveals the phase composition and quantitative morphology analysis of precipitation‐hardened Fe32Cu12Ni11Ti16Al29 complex‐concentrated alloy. The precipitates are shown to have a high coherency. Morphology transition between sphere, cuboidal, and elongated morphology is observed. Finally, the overaging behavior is captured using microhardness.
Rostyslav Nizinkovskyi +4 more
wiley +1 more source
Electron diffraction study of oleophobic films on copper, iron and aluminum [PDF]
, 1947 L. O. Brockway, J. Karle
openalex +1 more source
Toughness of Confined Auxetic Foams
Advanced Engineering Materials, EarlyView.Auxetic (negative Poisson's ratio) materials offer benefits such as impact mitigation, thermal insulation, vibration damping, and reduced shear strain, although their fracture mechanics are largely unexplored. This study investigates damage initiation and propagation in confined re‐entrant auxetic foams from polyurethane via experimental ...
Adrianos E. F. Athanasiadis +3 more
wiley +1 more source
Brazing process using'al-Si filler alloy reliably bonds aluminum parts [PDF]
, 1966 Brazing process employs an aluminum-silicon filler alloy for diffusion bonding of aluminum parts in a vacuum or inert gas atmosphere. This process is carried out at temperatures substantially below those required in conventional process and produces ...
Beuyukian, C. S., Johnson, W. R.
core +1 more source
Thermal expansion of beryllium and aluminum-beryllium alloys
, 1927 P. Hidnert, W. T. Sweeney
openalex +1 more source
IMMUNIZATION WITH MIXTURES OF POLIOMYELITIS VIRUS AND ALUMINUM HYDROXIDE [PDF]
, 1931 C. P. Rhoads
openalex +1 more source
Advanced Engineering Materials, EarlyView.Fe‐ and Mn‐containing AlSi alloys undergo aluminothermic reaction with Mn oxide in sessile‐drop and crucible experiments forming poor‐wetting Al2O3 while Mn enriches in the alloy. Primary Fe‐containing particles are preferentially attached to the Mn oxide.
Hanka Becker +6 more
wiley +1 more source
Fabrication and evaluation of brazed titanium-clad Borsic/aluminum compression panels [PDF]
Processes for brazing Borsic/aluminum composite materials that eliminate diffusion of braze alloy constituents into the aluminum matrix developed. One brazing study led to the development of a hybrid composite which combines high strength Borsic/aluminum
Bales, T. T. +2 more
core +1 more source