Results 81 to 90 of about 27,222 (284)
Confinement Effects on the Crystalline Features of Poly(9,9-dioctylfluorene) [PDF]
, 2016 Typical device architectures in polymer-based optoelectronic devices, such as field effect transistors organic light emitting diodes and photovoltaic cells include sub-100 nm semiconducting polymer thin-film active layers, whose microstructure is likely ...
Li, Ruipeng +5 more
core +2 more sources
Advanced Functional Materials, EarlyView.A MXene/PEDOT coating enables multimodal functionality and dual‐analyte detection of dopamine and serotonin in flexible microelectrode arrays while enhancing electrophysiological recording quality. The anti‐fouling, low‐impedance interface overcomes key limitations of conventional coatings, providing a robust and versatile platform to investigate the ...
Ilaria Gatti +8 more
wiley +1 more source
Доклады Белорусского государственного университета информатики и радиоэлектроники, 2019 Porous aluminium anodization process has been investigated in 63 wt % sulfuric electrolyte. Porous alumina formed at anodic voltages till 16 V had the «honey comb» cell structure while porous alumina formed at anodic voltages more than 16 V displayed the
S. K. Lazarouk +4 more
doaj
Advanced Functional Materials, EarlyView.A fluorine‐rich acrylate monomer (PFHEA) was solvent‐free applied to NCM90 and thermally decomposed under Ar to convert residual lithium into LiF and form a pre‐built LiF/fluorinated amorphous carbon (LiF/FC) interphase. The LiF/FC layer suppresses NiO rock‐salt reconstruction and microcrack propagation, lowers interfacial resistance, and improves Li ...
Pangyu Kim +6 more
wiley +1 more source
Usage of Porous Al2O3 Layers for RH Sensing [PDF]
, 2007 At the Department of Electron Devices a cheap, more or less CMOS process compatible capacitive type RH sensor has been developed. Capacitive sensors are based on dielectric property changes of thin films upon water vapour uptake which depends on the ...
Juhász, László +3 more
core +2 more sources
NiP/SiC composite coatings: the effects of particles on the electrochemical behaviour [PDF]
, 2005 NiP/SiC (17 at.% P) composite coatings were prepared by electrodeposition from a Brenner type plating bath containing SiC particles. Cyclic voltammetry and immersion time were used to evaluate the electrochemical behaviour of these coatings.
Bonino, Jean-Pierre +6 more
core +4 more sources
Advanced Functional Materials, EarlyView.Wafer‐scale two‐dimensioanl In2Se3 oxidized into InOx on sodium‐embedded beta‐alumina enables multifunctional reconfigurable electronics. Sodium ions accumulate within distinct spatial distribution under drain‐controlle and gate‐controlled operation. Drain‐control operation gives controllability of ultraviolet‐driven optoelectronic synaptic conductance
Jinhong Min +13 more
wiley +1 more source
Advances in anodic alumina MCP development [PDF]
Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2009 The development of microchannel plates (MCP) on the basis of anodic aluminum oxide (AAO) started in the recent years. High electric resistivity of AAO up to several GΩ makes impossible to obtain an amplification of the electrons current. Several approaches to increase the electric conductivity of AAO were studied by the authors. One of these approaches
Gleb Drobychev +5 more
openaire +1 more source
Advanced Materials, EarlyView.This study shows that alkaline leaching of PrBa0.8Ca0.2Co2O5+δ under anodic bias selectively removes Ba and Ca, forming a cobalt‐rich and amorphous layer. The modified surface significantly boosts ORR activity, offering a simple and effective strategy to improve electrochemical device performance.
Yeongtaek Hong +11 more
wiley +1 more source
Advanced Materials, EarlyView.In this work, low bandgap (≈1.55 eV) semitransparent perovskite solar cells (ST‐PSCs) having thin (thickness < ≈100 nm) perovskite layers and transparent conductive oxide‐based rear electrodes are fabricated using vacuum‐deposition methods. Two different ST‐PSCs demonstrated a high light utilization efficiency value of 4.2 (PCE: 9.26% and AVT: 45.3 ...
Abhyuday Paliwal +9 more
wiley +1 more source