Results 31 to 40 of about 491,224 (236)
Basic oxygen furnace slag (BOF) is widely used in road construction, but there is a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA), containing stone mastic asphalt (SMA), porous ...
Long-Sheng Huang
doaj +1 more source
Reinforcement of Recycled Foamed Asphalt Using Short Polypropylene Fibers
This paper presents the reinforcing effects of the inclusion of short polypropylene fibers on recycled foamed asphalt (RFA) mixture. Short polypropylene fibers of 10 mm length with a 0.15% by weight mixing ratio of the fiber to the asphalt binder were ...
Yongjoo Kim, Tae-Soon Park
doaj +1 more source
Bridging Horizontal to Vertical Radiative Cooling
Radiative cooling materials are mature but only work facing the sky, confining them to rooftops. Instead of developing new ones, this system bridges existing horizontal coolers to vertical windows using blades outside the glass. On an occupied urban building, windows stay up to 1.4°C below air temperature while preserving daylight, outward views, and ...
Xiangyu Meng, Gan Huang
wiley +1 more source
Evalution of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment, July 2005 [PDF]
Moisture sensitivity of Hot Mix Asphalt (HMA) mixtures, generally called stripping, is a major form of distress in asphalt concrete pavement. It is characterized by the loss of adhesive bond between the asphalt binder and the aggregate (a failure of the ...
core
Effect of Film Thickness on Resistance to Permanent Deformation in Asphalt Mixtures
The resistance of asphalt mixtures against permanent deformation is one of important requirements that have to be verified in the design process of asphalt mixtures.
Eva Remišová, Remišová, Eva
core +1 more source
Long-term performance of recycled asphalt mixtures containing high RAP and RAS
The application of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) on asphalt pavement can reduce the asphalt paving cost, conserve energy and protect the environment.
Jiangmiao Yu +5 more
doaj +1 more source
Shear Properties of Asphalt Mixtures under Triaxial Compression
In order to study the influences of confining pressure and temperature on the shear properties of asphalt mixtures, triaxial tests were conducted at 40 °C, 50 °C, and 60 °C, with the confining pressure ranges from 0 to 1 MPa for the widely
Tuo Huang +4 more
doaj +1 more source
This was a study on the mechanical behavior of hot asphalt mixtures with regard to permanent deformation, considering static creep tests and the parameters derived from the Superpave compaction curve.
Taciano Oliveira da Silva +5 more
doaj +1 more source
Use of Adhesion Promoters in Asphalt Mixtures [PDF]
Abstract The purpose of asphalt binder as a significant binder in road constructions is to permanently bind aggregates of different compositions and grain sizes. The asphalt binder itself does not have suitable adhesiveness, so after a period of time, bare grains can appear.
Cihlářová, Denisa +3 more
openaire +3 more sources
Architected Load Paths Enable Stiffening and Motion Programming in Soft Pneumatic Actuators
A single MARS template introduces an architected reinforcement strategy for programmable soft pneumatic actuators through internal structural organization and selective beam removal. This monolithic architecture enables deformation reconfiguration from continuous bending to joint‐like articulation and torsional motion, allowing one compliant platform ...
Jie Wang +6 more
wiley +1 more source

