Results 71 to 80 of about 208,968 (293)
Growth Behavior of Austenite Grain of Secondary Hardening Ultra-high Strength Steel AF1410
Teshugang, 2010 The growth behavior of austenite grain of secondary hardening ultra-high strength steel AF1410 (% : 0.165C, 14.10Co, 9.83Ni, 1.92Cr, 1.05Mo) heating at 800 ~ 1200 °C for 5 - 180 min has been studied.
廉学魁 +5 more
doaj
Hot ductility of TiNb IF steel slab after hot torsion testing [PDF]
, 2019 The aim of the work was to evaluate the hot ductility loss in TiNb stabilized IF steel directly from the continuously-cast slab using hot torsion testing (plastometry) in the temperature range 600-1250 degrees C according to the basic programme, and also
Bořuta, Aleš +10 more
core +1 more source
Hydrogen‐Assisted Fracture of Iron‐Based Fe–Ni–Al Alloys
Advanced Engineering Materials, EarlyView.Principal relations and fracture mechanisms of single‐phase and precipitate‐strengthened Fe–Ni–Al alloys subjected to prior electrochemical hydrogen charging are identified. The mechanisms of hydrogen effect on strength and microhardness are discussed, including hydrogen‐induced increase in microhardness and the role of hydrogen in fracture behavior ...
Nataliya Yadzhak +3 more
wiley +1 more source
Crystals, 2017 The pinning effect of cerium inclusions in the austenite grain growth of SS400 steel at 1300 °C is investigated by using a semi-empirical-simulation. Firstly, steel samples containing cerium inclusions are prepared; then the properties of inclusions are ...
Zary Adabavazeh +2 more
doaj +1 more source
MICROSTRUCTURE AND TEXTURE FORMATION OF THIN HOT ROLLED STEEL STRIPS [PDF]
, 2004 C
COLÀS, R +4 more
core +1 more source
Hot ductility and deformation behavior of C-Mn/Nb-microalloyed steel related to cracking during continuous casting [PDF]
, 2014 Hot ductility studies have been performed on C-Mn and C-Mn-Nb steels with an approach to simulate the effect of cooling conditions experienced by steel in secondary cooling zone during continuous casting.
Lanjewar, Harishchandra +3 more
core +1 more source
Tailoring Functional Properties of Ti–Ni–Cu Shape Memory Alloy Thin Films for MEMS Actuators
Advanced Engineering Materials, EarlyView.A comprehensive study of critical parameters required to develop well‐performing Ti–Ni–Cu thin film shape memory alloy microactuators is provided. Materials science and device integration aspects are integrated by addressing structural and physical relationships using complementary characterization techniques as well as a practical fabrication solution
Elaheh Akbarnejad +6 more
wiley +1 more source
Journal of Materials Research and TechnologyAustenitization is significant for understanding the microstructure and residual stress evolution in additive manufacturing of non-austenitic steels. However, the accurate modeling of austenite transformation of additively manufactured parts is rarely ...
Yi Liu +3 more
doaj +1 more source
Cailiao gongcheng, 2018 Taking 8Cr4Mo4Ni4V bearing steel as the experimental material, the effect of heating temperature and holding time on austenite grain size was studied by austenite isothermal experiment.
CAI Xin +4 more
doaj +1 more source
The combined effect of chemical composition and cooling rate on transformation temperatures of hypoeutectoid steels [PDF]
, 2018 The transformation temperatures A(r3) and A(r1) of four unalloyed hypoeutectoid steels with a carbon content of 0.029-0,73 % were determined using dilatometric tests.
Kawulok, Petr +6 more
core +1 more source