Results 21 to 30 of about 3,497,255 (280)
Experimental Study of Octagonal Steel Columns Filled with Plain and Fiber Concrete under the Influence of Compressive Axial Load with Eccentricity [PDF]
Journal of Rehabilitation in Civil Engineering, 2021 In recent years, Concrete Filled Tube (CFT) columns have been very much taken into consideration due to the many advantages of the instrument. In experimental studies, the focus has been on compressive loading.
Navid Mahdavi +2 more
doaj +1 more source
, 2023 Axial compressive ultimate bearing capacity of specimens with different concentrations of salt solution.
Qiang Pei (4003739) +5 more
core +1 more source
Use of Pile Driving Analysis for Assessment of Axial Load Capacity of Piles [PDF]
, 2012 Driven piles are commonly used in foundation engineering. Pile driving formulae, which directly relate the pile set per blow to the capacity of the pile, are commonly used to decide whether an installed pile will have the designed capacity.
Salgado, Rodrigo, Zhang, Yanbei
core +1 more source
Compressive strength capacity of light gauge steel composite columns
Case Studies in Construction Materials, 2016 The axial compressive strength capacity of concrete-filled light gauge steel composite columns was assessed through an experimental program involving twelve long and fourteen stub columns with width-to-thickness ratio of 125 for the encasing steel ...
W. Leonardo Cortés-Puentes +3 more
doaj +1 more source
Journal of Chemistry, 2022 In order to study the influence of two parameters, height-thickness ratio and reinforcement ratio, on the compressive performance of prefabricated recycled concrete block-filled core walls, the author proposes a test method for the compressive strength ...
Jianfeng Cao +5 more
doaj +1 more source
Science and Engineering of Composite Materials, 2021 The axial compressive bearing capacity, failure modes, and failure mechanisms of carbon fiber-reinforced aluminum laminate (CARALL) columns with single-channel cross sections were studied in detail. In this study, two types of short CARALL specimens with
Huang Teng +4 more
doaj +1 more source
Investigating of the Effect of Concrete Confinement on the Axial Performance of Circular Concrete Filled Double-Skin Steel Tubular (CFDST) Long Columns [PDF]
Journal of Rehabilitation in Civil Engineering, 2020 In this study, the co-operation of steel and concrete in composite columns is considered. Using numerical modeling to study the behavior of these sections, a new type of sections, namely Concrete Filled Double-Skin steel Tubular (CFDST) columns, is ...
Hamid Saberi +3 more
doaj +1 more source
Comparative Study on the Axial Compression and Bearing Capacity of Reactive Powder Concrete‐Filled Circular Steel Tube [PDF]
Advances in Materials Science and Engineering, 2018 Reactive powder concrete (RPC) was confined by the circular steel tube to obtain the required ductility. The axial compression test results of 139 columns from different scholars were collated and compared to study the axial compression and bearing capacity of a reactive powder concrete‐filled circular steel tube, of which the confining coefficient is ...
Mingyang Chen, Xiaomeng Hou
openaire +2 more sources
Ultimate axial load capacity of v-band clamp joints. [PDF]
, 2009 Band clamps with a flat bottomed V-section are used to connect a pair of circular flanges to provide a joint with significant axial strength. Despite the wide application of V-band clamps, their behaviour is not fully understood and the ultimate axial ...
Barrans, Simon, Muller, M
core +4 more sources
Advances in Civil Engineering, 2021 The behavior of H-shaped honeycombed stub columns with rectangular concrete-filled steel tube flanges (STHCCs) subjected to axial load was investigated experimentally.
Jing Ji +4 more
doaj +1 more source