Results 21 to 30 of about 2,616,911 (291)
Seismic Response of GFRP-RC Interior Beam-to-Column Joints under Cyclic Static Loads
Buildings, 2022 A total of nine specimens were constructed and tested under cyclic loads to investigate the differences in seismic behavior between glass fiber-reinforced polymer (GFRP)-reinforced concrete (RC) joints and RC beam-to-column joints.
Rui Guo, Dan Yang, Bin Jia, Deyun Tang
doaj +1 more source
Architected Load Paths Enable Stiffening and Motion Programming in Soft Pneumatic Actuators. [PDF]
Adv Sci (Weinh)A single MARS template introduces an architected reinforcement strategy for programmable soft pneumatic actuators through internal structural organization and selective beam removal. This monolithic architecture enables deformation reconfiguration from continuous bending to joint‐like articulation and torsional motion, allowing one compliant platform ...
Wang J +6 more
europepmc +2 more sources
Seismic performance of reinforced concrete interior beam-column joints with novel reinforcement detail [PDF]
, 2021 Horizontal stirrups are normally required in reinforced concrete (RC) beam-column joints (BCJs) for resisting shear forces in seismic design. For RC moment-resisting frames subjected to a high lateral load, a large number of stirrups are needed in joint ...
Li, Bo +3 more
core +1 more source
Bistable Networks Enable Complex Shape Changes. [PDF]
Adv Sci (Weinh)Transition‐controlled metamaterials are networks of bistable mechanical memory that store local binary states and express them as global shape change. By decoupling low‐force programming from high‐force holding, a single lattice is reconfigured into distinct 2D profiles and 3D surfaces without continuous actuation, enabling reusable morphing materials ...
Thomas S, Lipton J.
europepmc +2 more sources
Seismic behavior of non seismically designed eccentric reinforced concrete beam column joints
, 2021 Non seismically designed eccentric reinforced concrete beam column joints were extensively used in existing reinforced concrete frame buildings, which were found to be vulnerable to seismic action in many incidences.
Liu, Ying +5 more
core +1 more source
DAMAGE EVOLUTION FOR REPAIRABILITY OF SUBSTANDARD BEAM-COLUMN JOINTS [PDF]
Proceedings of the 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015), 2021 Substandard reinforced concrete (RC) joints often exhibited poor seismic performance even under moderate intensity earthquakes, which is due to the lack of earthquake-resistant design detailing. Premature joint cracking often compromises the seismic performance of the entire building, initiating local collapses or global failure mechanisms.
Yurdakul Ö. +4 more
openaire +3 more sources
Study of cold formed steel beam column joint to resist lateral load [PDF]
MATEC Web of Conferences, 2019 Cold Formed Steel (CFS) is one of the materials that recently used in building structures. There are many advantages of CFS compared with other materials, such as lightweight, high tensile strength, and fast construction. Hollow Structural Sections (HSS)
Desmaliana Erma +3 more
doaj +1 more source
Case Studies in Construction Materials, 2021 This study aims to provide a review of the literature on the hybrid reinforced concrete beam-column joints that used steel fibers reinforced concrete (SFRC) or high-performance fibers reinforced cementitious composites (HPFRCC) in the joint region ...
Wissam Nadir +2 more
doaj +1 more source
EXPERIMENTAL STUDY OF RC EXTERIOR BEAM-COLUMN JOINT SUBJECTED TO TORSIONAL MOMENT [PDF]
Journal of Engineering Research - Egypt, 2015 This paper presents the results of an experimental program conducted in order to investigate the behavior of Type-I beam-column Joints, where the beam was subjected to shear stresses due to combined effect of shear force and torsional moment (beam ...
Tarek El-Shafiey +3 more
doaj +1 more source
Journal of Engineering, 2023 A reinforced concrete frame is referred as "RIGID FRAMES". However, researches indicate that the Beam-Column joint (BCJ) is definitely not rigid. In addition, extensive research shows that failure may occur at the joint instead of in the beam or the ...
Jamal A. Farhan, Zaid M. Kani
doaj +1 more source