Results 1 to 10 of about 504 (159)
Mechanism Influencing the Drying Behavior of Bitumen Emulsion [PDF]
Materials, 2021 The drying process of bitumen emulsion largely dominates the strength development of emulsion-based mixtures for pavement structure, thus it can be used to judge the quality of bitumen emulsion. However, the drying behaviour of bitumen emulsions was seldom considered.
Jian Ouyang, Jingtao Shi, Ouyang Jian
exaly +5 more sources
Anionic Bitumen Emulsions for Waterproofing [PDF]
E3S Web of Conferences, 2021 Bitumen emulsions (BE) are widely used in road construction, for building and structure waterproofing. Storage stability is one of the main BE requirements. They should only break on contact with the surface.
Antonova Ilvira, Ayupov Damir
doaj +2 more sources
Current Research and Challenges in Bitumen Emulsion Manufacturing and Its Properties [PDF]
Materials, 2022 Ahmed Al-Mohammedawi +1 more
exaly +2 more sources
Providing interlayer adhesion of dissimilar layers of top road surfaces [PDF]
E3S Web of Conferences, 2021 The article reviews the option of how to make the top pavement of asphalt-concrete mixture adhere reliably to the base, which is the underlying cement-concrete coating. The bitumen-latex emulsion is suggested as a binder for the two pavement layers.
Gabdullin Talgat, Makhmutov Marat
doaj +1 more source
Influence of Solvents on The separation of Water From The bitumen Emulsions Using Alginite.
Zanco Journal of Pure and Applied Sciences, 2021 The impact of various diluents on the removing of water from bitumen emulsions for the distillation feed (bitumen) using alginite as a demulsifier was investigated. Alginite as a natural rock is able to remove water from the bitumen emulsion.
Sangar S.Ahmed
doaj +3 more sources
DEVELOPMENT OF A PREMIUM COLD MIX ASPHALT
Mağallaẗ Al-kūfaẗ Al-handasiyyaẗ, 2023 Cold mix asphalt produced using conventional emulsion and limestone filler has three main disadvantages, namely low early strength due to high amount of water within the mix, long curing time ranging from 2-24 months and high air voids content.
Manar Hamzah Herez +3 more
doaj +1 more source
Quick-traffic slurry surfacing mix with orthophosphoric acid
Production Engineering Archives, 2021 Bitumen emulsions for slurry surfacing mix technology using oxidized bitumen and hydrochloric and orthophosphoric acids on laboratory DenimoTech bitumen-emulsion plant are made in the work.
Sidun Iurii +3 more
doaj +1 more source
Road safety research in a safety audit [PDF]
E3S Web of Conferences, 2021 The article reviews the option of how to make the top pavement of asphalt-concrete mixture adhere reliably to the base, which is the underlying cement-concrete coating. The bitumen-latex emulsion is suggested as a binder for the two pavement layers.
Mukhametshina Rumiya, Zagidullin Ramil
doaj +1 more source
Advances in Materials Science and Engineering, 2020 In order to investigate the influences of emulsifier types on properties of cement bitumen emulsion mortars (CBEM), anionic and cationic emulsifiers were used to prepare CBEM in this work.
Zhuoran Liu, Jinyang Huo, Zhenjun Wang
doaj +1 more source
Investigating the Effect of Cement and Fibers Containing Fatty Arbocell on the Mechanical and Moisture Properties of Cold Emulsion Asphalt Mixtures [PDF]
پژوهشهای زیرساختهای عمرانی, 2023 Cold emulsion asphalts have advantages and disadvantages. The advantages of this type of mixture are related to the low temperature of production, environmental considerations, and its portability to long distances.
Alireza Motamadnia +2 more
doaj +1 more source