Advantages and limitations of using foamed bitumen
Acta Technica Jaurinensis, 2021 Foamed asphalt refers to a bituminous mixture of road-building aggregates and foamed bitumen, produced by a cold mix process. There are a lot of related issue that has not been sufficiently investigated so far.
Ali Saleh, László Gáspár
doaj +3 more sources
Journal of Traffic and Transportation Engineering (English Edition), 2017 Optimum bitumen content determination is one of the major aims for foamed bitumen mix design. However, mix design procedures for foamed bitumen mixes are still under development.
Björn Birgisson +2 more
exaly +3 more sources
Fatigue Life Comparison of Recycled Cold Mixes with Foamed Bitumen and with Bitumen Emulsion
Procedia Engineering, 2017 Abstract The paper presents the results from the fatigue tests of recycled bases containing foamed bitumen and bitumen emulsion. The amount of bitumen used in both cases was 3% and 5%. For the production of the bitumen emulsion and foamed bitumen, 70/100 pen bitumen was used. Portland cement I 32,5R was applied as a binder. The binder comprised 3% of
Przemysław Buczynski, Marek IWAŃSKI
exaly +2 more sources
Bitumen Foaming Optimisation Process on the Basis of Rheological Properties. [PDF]
Materials (Basel), 2018 This article discusses the results of bitumen foam properties optimisation with respect to three factors: air pressure, bitumen temperature and amount of water. The test materials were unmodified bitumen 50/70 and bitumen 50/70 modified with 2.5% synthetic wax. The experiment was designed according to the 3(3−1) fractional factorial design.
Iwański M, Mazurek G, Buczyński P.
europepmc +3 more sources
The Baltic Journal of Road and Bridge Engineering, 2016 This paper presents findings of a study concerning the influence of binder type on the mechanical properties of road base in the cold recycling technology.
Marek Iwański, Anna Chomicz-Kowalska
doaj +3 more sources
STUDY OF THE RESISTANCE OF WARM ASPHALT MIXTURES BASED ON BITUMEN WITH THE ADDITION OF ENERGY-SAVING ADDITIVES AND FOAMED BITUMEN TO RUTTING [PDF]
Дороги і мости, 2023 Introduction. The article investigates asphalt mixtures produced by standard technology according to [1, 2] and the so-called warm asphalt mixtures produced at reduced process temperatures based on bitumen with the addition of energy-saving additives and
Anatolii Mudrychenko, Vyacheslav Savenko
doaj +1 more source
Stiffness modulus prediction against basic physical and mechanical characteristics of recycled base course with foamed bitumen and emulsified bitumen [PDF]
Archives of Civil Engineering, 2023 The paper’s objective was to present the results of predicting the stiffness modulus of a recycled mix containing a blended road binder with foamed bitumen and emulsified bitumen. The Sm (acc.
Grzegorz Mazurek +2 more
doaj +1 more source
ANALYSIS OF PHYSICO-MECHANICAL CHARACTERISTICS OF WARM ASPHALT CONCRETE MIXTURES BASED ON BITUMEN WITH THE ADDITION OF ENERGY-SAVING ADDITIVES AND FOAMED BITUMEN [PDF]
Дороги і мости, 2022 Introduction. The article investigates asphalt concrete mixtures made by standard technology according to [1], [2] and so-called warm asphalt concrete mixtures made at low technological temperatures on the basis of bitumen with the addition of energy ...
Anatolii Mudrychenko +2 more
doaj +1 more source
Rheological Behavior of Warm Mix Asphalt Modified with Foaming Process and Surfactant Additive
Crystals, 2021 Surfactants are frequently used to improve the engineering performances of foamed bitumen. Additionally, the foaming process can also perform a significant influence on the foam characteristics and rheological properties of foamed bitumen.
Guoyang Lu +4 more
doaj +1 more source
Effects of zeolites and hydrated lime on volumetrics and moisture resistance of foamed warm mix asphalt concrete [PDF]
Bulletin of the Polish Academy of Sciences: Technical Sciences, 2021 The paper concerns the utilization of hydrated lime and zeolites as additives in warm mix asphalt produced with foamed bitumen. The mentioned additives were added to the mixtures in exchange for specific quantities of mineral filler, which amounted to 0 ...
Anna Chomicz-Kowalska +3 more
doaj +1 more source