Results 161 to 170 of about 1,245 (199)
Some of the next articles are maybe not open access.
Application of adaptive NLM denoising algorithm in BOTDA
Global Intelligent Industry Conference 2020, 2021The Brillouin Optical Time Domain Analyzer (BOTDA) is based on the Brillouin scattering effect which is sensitive to the temperature and strain of the fiber at the same time. It is widely used in the field of large-scale structural monitoring. With the continuous development of market demand, the dynamics of the original BOTDA equipment The response ...
ZiQiang Huang +4 more
openaire +1 more source
BOTDA measurements in the presence of fiber vibrations
SPIE Proceedings, 2012The ramifications of optical fiber vibrations on the calibration phase of slope-assisted fast distributed Brillouin optical time-domain analysis, is studied. It is theoretically and experimentally found that for not too severe vibrations the Brillouin gain spectrum, as determined by classical BOTDA, is only negligibly broadened, still enabling the ...
Avi Motil +3 more
openaire +1 more source
Detection and monitoring of surface micro-cracks by PPP-BOTDA
Applied Optics, 2015Appearance of micrometer size surface cracks is common in structural elements such as welded connections, beams, and gusset plates in bridges. Brillouin scattering-based sensors are capable of making distributed strain measurements. Pre-pump-pulse Brillouin optical time domain analysis (PPP-BOTDA) provides a centimeter-level spatial resolution, which ...
Dewei, Meng, Farhad, Ansari, Xin, Feng
openaire +2 more sources
2016 IEEE 6th International Conference on Photonics (ICP), 2016
We propose a technique to modulate the pump light of phase-shift pulse Brillouin optical time domain analysis (PSP-BOTDA) with Walsh code in a nested configuration. We call it dual Walsh codes PSP-BOTDA. In this technique, two Walsh codes are each assigned to return-to-zero (RZ) and non-return-to-zero (NRZ) pulses.
M. S. D. Zan +2 more
openaire +1 more source
We propose a technique to modulate the pump light of phase-shift pulse Brillouin optical time domain analysis (PSP-BOTDA) with Walsh code in a nested configuration. We call it dual Walsh codes PSP-BOTDA. In this technique, two Walsh codes are each assigned to return-to-zero (RZ) and non-return-to-zero (NRZ) pulses.
M. S. D. Zan +2 more
openaire +1 more source
A method of fitting BOTDA data for the estimation of the Brillouin frequency shift
Optical Sensors 2023, 2023A Brillouin Optical Time-Domain Analysis (BOTDA) Lorentzian data fitting method to estimate the Brillouin Frequency Shift (BFS) at successive locations along the length of the sensing optical fiber is proposed. The data used to test the method is obtained from an experimental setup built to conduct temperature and strain measurements. Before Lorentzian
Komodromos, Michael +4 more
openaire +2 more sources
Application of BOTDA in Mass Concrete Temperature Monitoring
Applied Mechanics and Materials, 2012In order to study the application of distributed optical fiber in temperature monitoring of mass concrete, monitoring instruments are embedded in pile cap to carry out the field experiment. The results show that the distributed temperature fiber which is based on brillouin optical time-domain analysis (BOTDA) has the superiority of anti-jamming ...
Ju Hua Xiong +3 more
openaire +1 more source
BOTDA sensor simulation for the Measurement of Stress and Temperatures
2019 IEEE CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON), 2019This paper presents the simulation of a distributed Brillouin optical sensor for the measurement of stresses and tem- peratures, considering that currently there is no simulation tool that allows evaluating the performance of these types of sensors when some techniques aimed at increasing its detection range are applied.
Fernández B. Marco, Valencia C. Claudio
openaire +1 more source
BOTDA system using artificial neural network
2017 Opto-Electronics and Communications Conference (OECC) and Photonics Global Conference (PGC), 2017Distributed fiber-optic sensors employ the conventional fiber as the sensing medium and allow all locations along the optical fiber to be measured simultaneously. Thus the sensing scheme provides an efficient way of simultaneously achieving multi-points sensing with a convenient and low-cost configuration.
Liang Wang +5 more
openaire +1 more source
157km BOTDA with pulse coding and image processing
SPIE Proceedings, 2016A repeater-less Brillouin optical time-domain analyzer (BOTDA) with 157.68km sensing range is demonstrated, using the combination of random fiber laser Raman pumping and low-noise laser-diode-Raman pumping. With optical pulse coding (OPC) and Non Local Means (NLM) image processing, temperature sensing with ±0.70°C uncertainty and 8m spatial resolution ...
Xianyang Qian +7 more
openaire +1 more source
Narrowing Brillouin gain spectrum for BOTDA sensor
SPIE Proceedings, 2017A novel BOTDA method based on differential π-phase-shift-pulse pair is proposed for narrowing the Brillouin gain spectrum. Theoretical analysis and experimental results demonstrate that the proposal could achieve 17 MHz Brillouin gain spectrum linewidth with a fixed spatial resolution of 2.5 m.
Wenqiao Lin +4 more
openaire +1 more source

