Results 151 to 160 of about 850 (216)

Influence of Thermal Cycling on Friction, Wear, and Damage Evolution of Fused Deposition Modeling of 3D‐Printed Glass Fiber Reinforced Polylactic Acid Composites

Polymer Composites, EarlyView.
Schematic illustration of the experimental procedure of the specimens. ABSTRACT This research work investigated the effect of the cyclic thermo‐hygrometric aging regime between −20°C and +40°C with 0–400 cycles on the reciprocating tribological properties of fused deposition modeling (FDM) printed polylactic acid (PLA) and the same material reinforced ...
Sinan Fidan, Satılmış Ürgün, Nevin Gamze Karsli, Taner Yılmaz, Mustafa Özgür Bora, Mehmet İskender Özsoy   +5 more
wiley   +1 more source

Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball‐On‐Disk Wear of Additively Manufactured Polylactic Acid Composites

Polymer Composites, EarlyView.
Thermal Aging and Tribological Tests of Additive Manufactured PLA Composites. ABSTRACT This study focuses on the additive manufacturing of pure polylactic acid (PLA) specimens and milled glass fiber (GF)‐filled PLA composites under thermal cycling aging and wear tests. Wear tracks have been analyzed via 3D optical profiling and SEM imaging.
Sinan Fidan, Satılmış Ürgün, Nevin Gamze Karsli, Taner Yilmaz, Mustafa Özgür Bora, Mehmet İskender Özsoy   +5 more
wiley   +1 more source

Erosion Resistance Enhancement in Epoxy Composites by Recycled Rubber: Effect of Rubber Type

Polymer Engineering &Science, EarlyView.
Erosion resistance enhancement in epoxy composites by recycled rubber. ABSTRACT Epoxy‐based materials have low erosion resistance due to their brittle nature, and toughness modification stands out for enhancing it. At this stage, the use of waste rubber as a reinforcement component in the composite system is of interest due to its role in providing ...
Orkan Baran Korkusuz, Şehriban Öncel, Bağdagül Karaağaç, Tamer Sınmazçelik   +3 more
wiley   +1 more source

Interplay Between Dispersion, Nucleation, and Crystallization in HDPE/Graphene Nanocomposites Processed Under Thermokinetic Conditions

Polymer Engineering &Science, EarlyView.
Thermokinetic processing controls graphene fragmentation and dispersion in HDPE, promoting heterogeneous nucleation and multistep crystallization. The balance between nucleation enhancement and chain mobility restriction governs the final crystalline structure and material performance.
Lucas J. S. Nascimento, Tainá dos S. Guatimosim, Fernanda T. G. Dias, Sandro C. Amico, Otávio Bianchi   +4 more
wiley   +1 more source

Biosurfactant production by Pseudomonas aeruginosa isolated from mining waste: From genomic analysis to development of a polymeric composite for removal of hexavalent chromium

Polymer International, EarlyView.
Biosurfactant was produced by Pseudomonas aeruginosa using andiroba waste from Amazonia. A biosurfactant–alginate composite (Alg/BioS) was successfully synthesized via ionotropic gelation, and achieved up to 70% Cr6+ removal from water. Abstract Environmental contamination by heavy metals represents a significant challenge due to their persistence in ...
Paulo Diniz Austriaco, Emilly Cruz da Silva, Glenda Sores Gomes, Joane Almeida Alves, Amanda Vidal, Leandro Argolo, Rafaela Ribeiro, Luciana Souza, José Augusto Pires Bitencourt, Leonardo Brasil Felipe, Leonie Asfora Sarubbo, Sidnei Cerqueira dos Santos   +11 more
wiley   +1 more source

Screening Surface Modifications to Benzene to Improve Solubility in Hydroxyl‐Terminated Polybutadiene (HTPB)—A DFT Demonstration

Propellants, Explosives, Pyrotechnics, EarlyView.
ABSTRACT The objective of this paper is to demonstrate the advantage of computationally pre‐screening surface‐modifying material candidates, using density functional theory (DFT), to inform experimental synthesis and formulation efforts. This demonstration focuses on improving the solubility of benzene‐based materials in hydroxyl‐terminated ...
Samantha E. Knoth
wiley   +1 more source

Boundary lubrication conditions

Tribologia, 1984
openaire   +2 more sources

Some of the next articles are maybe not open access.

Related searches:

Lubricity Synergism in Boundary Lubrication

World Tribology Congress III, Volume 1, 2005
Dimethyl Ether (DME) has been known as a ultra clean smokeless fuel for diesel engines for over a decade now. A significant challenge is to ensure full lifetime for the diesel engine injection equipment when handling the low boiling point DME as this fuel has very low viscosity and lubricity.
Ion M. Sivebaek, Nadja L. Hansen, Kenneth H. Johansen   +2 more
openaire   +1 more source

Boundary lubrication in vivo

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2000
Evidence is reviewed for the concept that the body employs essentially the same lubrication system in many sites in the body where tissues slide over each other with such ease. This system consists of fluid adjacent to surfaces coated with an oligolamellar lining of surface-active phospholipid (SAPL) acting as a back-up boundary lubricant wherever the ...
openaire   +5 more sources

Boundary lubrication under water

Nature, 2006
Boundary lubrication, in which the rubbing surfaces are coated with molecular monolayers, has been studied extensively for over half a century. Such monolayers generally consist of amphiphilic surfactants anchored by their polar headgroups; sliding occurs at the interface between the layers, greatly reducing friction and especially wear of the ...
Briscoe, WH, Titmuss, S, Tiberg, F, Thomas, RK, McGillivray, DJ, Klein, J   +5 more
openaire   +3 more sources