Results 81 to 90 of about 9,418 (204)
Vacuum Levels Influence on the Properties of Various High Temperature Brazing Alloys
, 2015 The importance of a good vacuum for brazing Chromium containing alloys on stainless steel is well known. The vacuum level required is depending on the Cr content in the brazing alloy, higher content requires a higher vacuum level.
Mårs, Owe, Hryha, Eduard,
core
Microstructure and brazing properties of Ag20Cu35Zn(43.5-x-y)MnxSnyNi1.5 foil-filler brazing alloy
Hanjie xuebaoThe influence of the addition of Mn and Sn elements on the microstructure, melting characteristics, and wettability of low-silver Ag20Cu35Zn(43.5-x-y)MnxSnyNi1.5 brazing alloys was investigated, and the content of Mn and Sn elements in the brazing alloys
Xuecheng WANG +4 more
doaj +1 more source
Brazing diffusion bonding of micro-nickel cylinders and SUS-316 stainless steel
, 2010 The optimum parameters of brazing diffusion bonding for micro-nickel cylinders and SUS-316 stainless steel have been studied. Nickel base metal filler BNi-3 was introduced into the 0.05 mm bonding gap under 4 × 10−6 Torr vacuum at 1000 and 1050 °C to ...
康尚文; Kang, Shung-wen; Chen, Yu-tang; Liu, Hsung-pen
core +1 more source
Brazing technology of ceramic-Kovar alloy for high-temperature service
Hanjie xuebaoIn view of the brazing challenge of ceramics and Kovar alloys under high-temperature service conditions, gold-nickel brazing filler metal with superior high-temperature resistance, which replaced the silver-copper-titanium brazing filler metal used in ...
Yue ZHANG +6 more
doaj +1 more source
Journal of Materials Research and TechnologyThe effect of pre-stretching on solid-liquid interaction, microstructure and brazing performance of AA4343/AA3xxx/AA4343 layered aluminum sheet during brazing at the atomic level (solid solution), nanoscale (dislocation) and micron level (grain boundary)
Zhipeng Yuan +11 more
doaj +1 more source
Design and analysis of a RFQ resonant cavity for the IFMIF project [PDF]
, 2013 The IFMIF RFQ is designed with very challenging specifications to accelerate a 125mA deuterons beam from 0.1 MeV to 5 MeV at a frequency of 175 MHz, consists of 18 modules with length of ~550 mm each. The total lenght is 9.78 m.
Scantamburlo, Francesco
core
Experimental investigations of TiAl-brazes for ceramic joining
, 2022 S.44-49Ti-Al intermetallics were developed as light weight high temperature alloy. The phase diagram of Ti-Al is well known by several papers [1]. Particularly the -phase of TiAl is preferred because of its ductility and mechanical strength [2, 3]
Triebert, Anke, Martin, Hans-Peter
core +1 more source
Microstructure and properties of AlN and Cu joints brazed with Cu-Sn-Ti filler metal
Hanjie xuebaoThe brazing connection between AlN ceramics and Cu was achieved by using Cu-Sn-Ti filler metal, and the effect of process parameters on the interfacial microstructure and properties of AlN/Cu joints was investigated.
Chaonan NIU +6 more
doaj +1 more source