Results 51 to 60 of about 420,839 (300)
Effect of pressure on gas holdup in a bubble column and a slurry bubble column.
The bubble column is a stainless steel tube with inner diameter of 45 mn and has a cone-shaped bottom. The height of the multiphase contacting section was varied from 0.83 to 1.40 m. The gas was sparged into the column through a single nozzle with inner diameter of 0.59, 1.0, 2.0 or 3.0 mm and with outer diameter of 14 mm.
Kojima, Hiromitsu +2 more
openaire +2 more sources
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig +2 more
wiley +1 more source
Bubble Columns with Internals: A Review
Most Industrial Bubble Column Reactors Require the Utilization of Internal Structures for Heat Transfer And/or for Controlling the Flow Structures and Back Mixing in the System.
Al-Dahhan, Muthanna H. +2 more
core +1 more source
A high interstital austenitic steel is additively manufactured and postdensified by HIP to eliminate gas porosity. Thereby, the loss of N and Mn in Ar HIP atmosphere is investigated. Further, HIP using N2 atmosphere is investigated which led to excessive nitride formation.
F. Großwendt +4 more
wiley +1 more source
Flow in bubble columns: some numerical experiments
Bubble columns are being widely used in the chemical and petrochemical industry. It has become increasingly important to develop theoretically sound models for scaling up and designing of these reactors for more complicated reaction systems. Such reactor
Ranade, V. V., V.V. Ranade
core +1 more source
Heat Transfer Between Gas and Liquid in a Bubble Column
Multiphase contactors, e.g. bubble columns, are often used in operations accompanied by heat transfer between the phases. Literature studies have divided heat transfer measurements in two- and three-phase systems into: (i) estimations of bed-to-wall heat
M. Zizka, R. Sulc, P. Ditl
doaj +1 more source
An integrated pulmonary mRNA delivery platform combining novel biodegradable syringic acid‐derived ionizable lipids, design‐of‐experiments formulation optimization, and vibrating‐mesh nebulizer engineering enabled stable aerosolization and efficient lung delivery.
Neha Kaushal +21 more
wiley +1 more source
This study explores the combination of ultrasound technology with a detection algorithm to categorize flow regimes in bubble columns used for aeration in aquaculture.
Natee Thong-Un +4 more
doaj +1 more source
Two-Phase Bubble Columns: A Comprehensive Review
We present a comprehensive literature review on the two-phase bubble column; in this review we deeply analyze the flow regimes, the flow regime transitions, the local and global fluid dynamics parameters, and the mass transfer phenomena.
Giorgio Besagni +2 more
doaj +1 more source
Citation: 'bubble column' in the IUPAC Compendium of Chemical Terminology, 3rd ed.; International Union of Pure and Applied Chemistry; 2006. Online version 3.0.1, 2019. 10.1351/goldbook.B00750 • License: The IUPAC Gold Book is licensed under Creative Commons Attribution-ShareAlike CC BY-SA 4.0 International for individual terms. Requests for commercial
openaire +1 more source

