Stability Analysis of Different Stiffened Plates in Thermal-Mechanical Coupling Environments
Xibei Gongye Daxue Xuebao, 2020 In view of the structural stability problem of different typical stiffened panels under different loading conditions, ABAQUS software was used to build finite element models of four typical stiffened panels with the same cross section area.
doaj +1 more source
Effect of Corrosion Time on Critical Buckling Load of AISI 304 Columns [PDF]
Engineering and Technology Journal, 2018 In this work Corrosion buckling interaction behavior of AISI 304 stainless steel circular columns was investigated. Long and intermediate columns diameter of (6 mm) are tested in as received and corroded condition.
Hussain Al-Alkawi, Samih Al-najjar
doaj +1 more source
Buckling Analysis and Structure Improvement for the Afterburner Cylinder of an Aero-Engine
Aerospace, 2023 The buckling failure of the afterburner cylinder is a serious safety concern for aero-engines. To tackle this issue, the buckling simulation analysis of the afterburner cylinder was carried out by using finite element method (FEM) software to obtain the ...
Xiaoxia Zheng +5 more
doaj +1 more source
Modification of the Euler Load for the Stiffened Compressive Members and Determination of the Optimal Stiffening for the Maximum Buckling Load [PDF]
Journal of Rehabilitation in Civil Engineering, 2020 The potential of buckling in compressive members has been considered as a disadvantage when using steel members in the construction industry. In spite of the progress made in this regard, buckling is still considered as a challenge in the analysis and ...
Mahsa Karimian Sichani +2 more
doaj +1 more source
Experimental and Numerical Studies on the Shear Stability of Ship’s Thin Plates
Polish Maritime Research, 2022 The stability of thin plate plays an important role in the design and strength check of ship structure. In order to study the shear stability of ship’s thin plates, in-plane shear buckling tests were carried out using a picture frame fixture and a 3D ...
Li Xiaowen +4 more
doaj +1 more source
Experimental Investigation and Analysis of Dynamic Buckling of Drill String in Horizontal Well
Shock and Vibration, 2017 Buckling of tubulars has been the subject of many researches in the past. However, the models in previous research always followed the same assumptions: the friction and rotation effects are ignored.
Fushen Ren +3 more
doaj +1 more source
Experimental and finite element studies on buckling of skew plates under uniaxial compression
Science and Engineering of Composite Materials, 2015 Experimental studies were made on isotropic skew plates made of aluminum 7075-T6 and laminated composite skew plates under uniaxial compression with unloaded edges completely free and one loaded edge restrained completely and the other loaded edge ...
Venkateshappa Srinivasa Chikkol +2 more
doaj +1 more source
BUCKLING ASSESSMENT OF IMPERFECT CYLINDRICAL SHELLS UNDER AXIAL LOADS USING A GEP TECHNIQUE [PDF]
e-GFOS, 2018 Determination of buckling behavior of shell structures has long been identified as a challenging task. This is largely because the buckling behavior is masked by local large deformations, which occur once the critical load is reached.
doaj +1 more source
Nihon Kikai Gakkai ronbunshu, 2020 One of the seismic design methods for the steel containment vessel (SCV) of nuclear power plant is established by the Japan Electric Association as JEAC 4601-2015: Technical code for aseismic design of nuclear power plants.
Takashi OKAFUJI +6 more
doaj +1 more source
Lateral Buckling of Glare for Aerospace Application
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2023 Glare (Glass Reinforced Aluminium) which consists of fibre metal laminate composite consisting of aluminium and glass is used aerospace structures are supposed to buckling and impact loads.
Eyüp Yeter, Burak Şahin
doaj +1 more source