Results 1 to 10 of about 72,150 (307)
Low-Temperature Decomposition of CaCO<sub>3</sub> in NiO/CaCO<sub>3</sub> and CuO/CaCO<sub>3</sub> Powder Under H<sub>2</sub> at Industrial Waste Heat Temperatures. [PDF]
Calcium looping (CaL) is a CO2 capture technology based on the reversible carbonation of calcium salts. Calcium-based materials are highly reactive with CO2 and are generated as by-products or waste across a wide range of industries—such as cement, steel, and fisheries—leading to expectations that the calcium looping (CaL) process can be implemented at
Yoshida T, Gemma R.
europepmc +2 more sources
Partial replacement of CaCO3 with Nano CaCO3 to protect metal surfaces [PDF]
Objectives: Nanomaterials are currently being studied and used in paints. The purpose of this study is to investigate the properties of alkyd paint to protect metal when replacing CaCO3 by nanomaterial. Methods/ analysis : Using themethod of replacing CaCO3 coating by CaCO3 nanomaterials with different proportions in traditional paint formulas, the ...
Le Huy Hai +2 more
openaire +2 more sources
Nano-CaCO3 synthesis by jet flow [PDF]
Abstract A new methodology was introduced to produce hollow nano calcite particles in homogenous size distribution without aggregation. The design consisted of a jet flow system in which the crystallization region was separated from the stabilization region.
Ulkeryildiz, Eda +2 more
openaire +2 more sources
CaCO3 Hollow Spheres with CaCO3 Binder.
試薬のCaCOg粒子がCaCO3微結晶で結合し,モザイク状に配列した球殻を有するCaCO,中空球形粉体について述べる。CaC12溶液中でCaCO3粒子と油(ケロシン)を高速でかきまぜ,CaCO3糧子に被覆された油滴を生成させた。アルカリ性でのCO2との反応により,この溶液からCaCOsを油滴上の粒子間に析出させ,粒子同士を結合させた。その後これを水相から分離し,固体粒子の配列した球殻の内部の油を抜き出すことにより,中空体を調製した.この方法により,粒径1o~20pmの原料粒子を用いて,粒径105-250gmの中空球形粉体を生成レた。SEM像により,この中窒体は原料粒子の単粒子層からなること,またバインダーCaCO3は中窒体の外壁にのみ微結晶として析出し,内壁には析出していないことが明らかになった ...
Miki NOZAWA +3 more
openaire +2 more sources
Influence of Nanopaticle CaCO3 Addition to the Physical and Mechanical Properties of Polypropylene-CaCO3 Composite. This research was carried out to study the effect of adding CaCO3 nanoparticle on the physical and mechanical properties of polypropylene-CaCO3 composites. It was characterized by several parameters such as tensile strength, hardness, and
Deswita Deswita +4 more
openaire +1 more source
Inhibition by glycosaminoglycans of CaCO3 (calcite) crystallization [PDF]
Of a range of glycosaminoglycans, heparin and heparan sulphate were the most effective inhibitors in vitro of CaCO3 (calcite) crystallization as assayed by conductimetric measurements. The possible role of such glycosaminoglycans in modulating calcium-salt crystallizations in vivo is discussed.
D, Grant, W F, Long, F B, Williamson
openaire +2 more sources
Poly(butylene adipate-co-terephthalate) (PBAT) is considered as the most promising polymers for preparing biodegradable mulching films. However, PBAT films are suffered to severe weathering in use. This study aims to look into the effects of high amounts of micro-sized calcium carbonate and silane coated calcium carbonate on the weathering of PBAT ...
Yang Yang, Caili Zhang, Yunxuan Weng
openaire +2 more sources
Department of Chemistry, GITAM University, Visakhapatnam-530 045, Andhra Pradesh, India E-mail : mscbabu@yahoo.com Fax : 91-891-2790032 Manuscript received online 29 December 2014, accepted 25 August 2015 Synthesis of superhydrophobic CaCO3, CaCO3 : La3+ and CaCO3 : Tb3+ with complex morphologies under the influence of lauric acid in methanol medium ...
Balakrishna Kurra +3 more
openaire +3 more sources
Stability of CaCO3 in Ca(OH)2 solution [PDF]
Abstract The effect of calcium hydroxide (Ca(OH)2) on the stability of calcium carbonate (CaCO3) particles was investigated with respect to the surface potential and particle size. Both CaCO3 and Ca(OH)2 were dissolved in ultrapure water at concentrations up to 100 mM.
Sevgi Kilic +2 more
openaire +3 more sources
Encapsulation Method for CaCO3 Nanoparticles
In this study, a simple wet encapsulation method was used to coat the nano calcium carbonate particles at the temperature of 80°C. Stearic acid was used as the coating agent at 3, 6 and 9 wt%. Analysis of SEM images indicates that agglomeration can be reduced significantly by using 3wt% amount of SA.
Dihayati, Y. +4 more
openaire +1 more source

