Results 61 to 70 of about 171,996 (199)
The chemical compatibility of five commercial ceramics with varying MgO and Al2O3 content is studied in contact with liquid lead (Pb) at 700 °C for potential use in high‐temperature Pb‐based thermal energy storage. After 1008 h of static exposure, the samples are analyzed using a scanning electron microscope coupled with energy‐dispersive spectroscopy ...
Margaux Zehnder +3 more
wiley +1 more source
Reduction of chromium oxides with calcium carbide during thestainless steelmaking process
An efficient reduction of chromium from slag requires an appropriate reduction agent for the given steelmaking technology. The usual slag reduction praxis consists of carbon injections and additions of ferrosilicon and aluminum.Reduction of chromium ...
B. Arh, F. Vode, F. Tehovnik, J. Burja
doaj
Utilization of carbide slag-activated ground granulated blastfurnace slag to treat gypseous soil
Abstract Treating gypseous soils with lime or cement may induce remarkable swelling, resulting in the deterioration of pavement subgrade or other foundation layers. To mitigate this swelling, two industry by-products, carbide slag (CS) and ground granulated blastfurnace slag (GGBS), were utilized in this study.
Wentao Li, Yaolin Yi, Anand J. Puppala
openaire +1 more source
This work investigates the wear resistance and nitriding behavior of PBF‐LB/M‐processed Osprey HWTS 50, a lean hot work tool steel. Three heat treatment conditions are compared to conventional wrought H13, H11, and PBF‐LB/M 18Ni300. The study highlights HWTS 50's enhanced nitrogen diffusion, deeper nitriding hardness depth, and comparable or improved ...
Jonathan Hann +6 more
wiley +1 more source
To achieve effective utilization of large-scale solid waste, this study prepared subgrade materials using mine waste, fly ash, and carbide slag as raw materials.
Jin Ma, Jia Tong
doaj +1 more source
Microstructure, Defects, and Fatigue Response of High‐Strength Tool Steels
The martensitic tool steel family is designed for use in various working environments where they are subjected to repeatedly high mechanical loads. Despite the continuous upgrade of material´s microstructures through compositional development or processing techniques, defects remain a critical factor for the tool performance by leading to fatigue ...
Katerina Chantziara +3 more
wiley +1 more source
This study quantifies axial and torsional long‐life fatigue (LLF) behavior of three carbide‐rich PM‐HIP tool steels, correlating LLF strength with intrinsic defect size and cleanliness, thereby extracting material‐specific mean stress sensitivities and Haigh diagrams.
Lennart Mirko Scholl +4 more
wiley +1 more source
Rotating‐bending fatigue tests on AISI D2 and AISI A11 quantify how cleanliness, carbide structure, hardness, and fabrication‐induced compressive residual stresses govern long‐life fatigue at NG = 107 cycles. Statistical fracture‐surface analysis and extreme‐value √area statistics link crack‐initiators to LLF strength.
Lennart Mirko Scholl +6 more
wiley +1 more source
An extreme non‐equilibrium process combining heavy direct current sintering and TiSi2 addition is used to construct intragranular energy dissipation units within high‐entropy boride ceramics to overcome the strength‐toughness trade‐off. The resulting ceramic demonstrates attractive mechanical properties with a flexural strength of 887 MPa and a ...
Yingjun Liu +13 more
wiley +1 more source
This study developed a composite solidification system for silt from the Yellow River Basin, utilizing calcium carbide slag, ground granulated blast-furnace slag, and desulfurized gypsum, in conjunction with the xanthan gum biopolymer.
Xiaodan Tang +7 more
doaj +1 more source

