Results 61 to 70 of about 6,533 (216)

Harnessing Carbon‐Containing Materials for Next‐Generation High‐Temperature Electromagnetic Wave Absorbers

open access: yesCarbon Energy, EarlyView.
Traditional carbon materials show limited high‐temperature oxidation resistance, which becomes pronounced above 673 K and significantly restricts their practical applicability. To address this challenge, enhancing polarization loss and leveraging its negative temperature dependence to offset the temperature‐induced increase in conductance loss are ...
Yang Li   +9 more
wiley   +1 more source

Optimization of medium–low-grade phosphorus rock carbothermal reduction process by response surface methodology

open access: yesGreen Processing and Synthesis, 2020
Phosphorus extraction from phosphorus rock was conducted by carbothermal reduction with silica and coke. The effects of reaction temperature, reaction time, coke excess coefficient, molar ratio of silicon–calcium, and phosphorus rock particle size on the
Luo Biwei   +6 more
doaj   +1 more source

Boosting C=O Bond Scissoring Over a Pyridinic Nitrogen‐Modified Cu–MoC Interface for High‐Efficiency CO2 Hydrogenation to CO

open access: yesCarbon Energy, EarlyView.
ABSTRACT Reverse water‐gas shift (RWGS) reaction‐aided sustainable CO2 conversion has emerged as one promising and effective approach for simultaneously mitigating climate change and solidifying energy security. Molybdenum carbide‐based catalysts demonstrate excellent selectivity for sustainably transforming CO2 into CO product, but harsh carburization
Haiquan Liao   +13 more
wiley   +1 more source

Component and System Sensitivity Considerations for Design of a Lunar ISRU Oxygen Production Plant [PDF]

open access: yes, 2009
Component and system sensitivities of some design parameters of ISRU system components are analyzed. The differences between terrestrial and lunar excavation are discussed, and a qualitative comparison of large and small excavators is started. The effect
Balasubramaniam, Ramaswamy   +4 more
core   +1 more source

Purification of Li2CO3 Obtained through Pyrometallurgical Treatment of NMC Black Mass from Electric Vehicle Batteries

open access: yesChemSusChem, Volume 18, Issue 6, March 15, 2025.
Lithium carbonate (Li2CO3) obtained from the black mass of recycled lithium batteries is dissolved in water under controlled conditions to remove lithium fluoride (LiF), which is present at a concentration of 3.08 % by weight. The dissolution is carried out at temperatures below 10 °C, and it has been demonstrated that lower temperatures result in ...
Laura Rosso   +3 more
wiley   +1 more source

Preparation of TiC by carbothermal reduction in vacuum and acid leaching using blast furnace slag bearing titania

open access: yesGreen Processing and Synthesis, 2016
A combined process of carbothermal reduction in vacuum and acid leaching is proposed to produce TiC from titanium bearing blast furnace (BF) slag from Pan Steel in Panzhihua city in China.
Hu Meilong   +5 more
doaj   +1 more source

Investigation on microwave carbothermal reduction behavior of low-grade pyrolusite

open access: yesJournal of Materials Research and Technology, 2020
Applying microwave heating, in substitution for conventional industrial process heating, renders energy-saving and clean efficient for mineral reduction.
Guo Chen   +10 more
doaj   +1 more source

Etching‐Expanded Anode: A Method to Improve the Reduction Efficiency of Vacuum Thermal Reduction of Spent Anode to Spent Ternary Cathode

open access: yesENERGY &ENVIRONMENTAL MATERIALS, EarlyView.
Etch‐expanded lithium ion battery anode vacuum carbon thermal reduction lithium ion battery anode flow chart. Vacuum carbon thermal reduction has been widely studied for the recovery of ternary lithium batteries, and there are many choices for the type of carbon to be reduced in this method, such as expensive carbon nanotubes and inexpensive battery ...
Jun Li   +5 more
wiley   +1 more source

A Sulfur Fixation Strategy via Magnesium Oxide for Constructing High‐Rate Hard Carbon Anodes in Sodium‐Ion Batteries

open access: yesENERGY &ENVIRONMENTAL MATERIALS, EarlyView.
A sulfur fixation strategy via magnesium oxide is proposed to address sulfur dissolution in hard carbon anodes for sodium‐ion batteries. This method focuses on modifying the morphological structure of the hard carbon material, leading to significantly improved electrochemical performance.
Zebin Song   +5 more
wiley   +1 more source

Synthesis of HfB2 Powders by Carbothermal Reduction

open access: yesJournal of Advanced Materials in Engineering, 2020
In this research, solid state carbothermal synthesis of HfB2 Nano powders was investigated. For this purpose, HfO2,H3BO3, carbon active or phenolic resin were used as raw materials for carbothermal reaction.
M. Shirvani, M. Mashhadi, M. Yosofi
doaj  

Home - About - Disclaimer - Privacy