Results 151 to 160 of about 15,586 (258)

First Operation Results of a Methanol Demonstration Plant With Real Steel Mill Gases

Chemie Ingenieur Technik, EarlyView.
A demonstration plant with industrial setup regarding length, diameter, boiling water cooling system and gas recycle was initially operated with cleaned blast furnace gas and compared with earlier experiments with bottle gases. Dynamic disturbances from the steel mill and gas cleaning unit were noticed and could be compensated by the control system ...
Johannes Michael Voß, Tim Schulzke
wiley   +1 more source

Thermal Degradation of PFAS in Different Scales: Measurement of Hydrogen Fluoride (HF)

Chemie Ingenieur Technik, EarlyView.
The communication article is about the challenges to balance a combustor in the case of fluorine when incinerating PFAS containing materials. Several analytical methods are compared: for continuous measurement, FTIR with TDLS. The detected fluorine species are further compared with results upon IC and pyrohydrolysis for discontinuous measurements in ...
Hans‐Joachim Gehrmann, Vanessa Nuredin, Krasimir Aleksandrov, Steffen Tonndorf, Manuela Hauser, Björn Meermann, Dieter Stapf   +6 more
wiley   +1 more source

Catalytic Oxidation of CO and VOC in Flue Gas of Coffee Roasting Machines

Chemie Ingenieur Technik, EarlyView.
Platinum‐coated cordierite monoliths effectively oxidized CO and VOC in coffee roasting exhaust with higher Pt loadings lowering light‐off temperatures. Scaled up 90 g/ft3 catalyst in a 5 kg roaster achieved 96% CO and around 78% VOC conversion at 350°C, highlighting stable operation requires flue gas temperatures ≥350°C.
Till Hauswald, Kalle Weidauer, Christoph Hahn, Sven Kureti   +3 more
wiley   +1 more source

Selective Non‐Catalytic Reduction of NOx in the Exhaust Gas of Small Wood Gasification Boilers

Chemie Ingenieur Technik, EarlyView.
Kinetic studies of the SNCR reaction were conducted to investigate NOx reduction in the exhaust gas of small‐scale wood gasification boilers. Both the experimental results and the derived global kinetic model indicate that SNCR can achieve a significant reduction in NOx emissions under typical operating conditions. ABSTRACT The gas‐phase reaction of NO
Alexander Groß, Sven Kureti
wiley   +1 more source

Impact of Trace Water on the Macroscopic Activity of Commercial Ammonia Cracking Catalysts Under Process‐Relevant Conditions

Chemie Ingenieur Technik, EarlyView.
This study evaluates how small water impurities—typical in ammonia cracking feedstock—affect catalyst performance at elevated pressures and temperatures. By decoupling permanent degradation from reversible inhibition, the findings highlight trace water as a significant factor for reliable catalyst screening and industrial ammonia cracking scale‐up ...
Bruno V. P. Lago, Sebastian Wodak, Marianne Ponceau, Axel Behrens, Jan‐Peter Bohn, Sebastian Rehfeldt, Harald Klein   +6 more
wiley   +1 more source

Catalytic combustion of propane.

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 1987
FUKETA, Toyoshi, MIYAUCHI, Toshio
openaire   +2 more sources

Hydroprocessing of synthetic kerosene over a non‐sulphided Ni/Al2O3 catalyst: Impact of alcohols and ketones on alkene conversion

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Synthetic jet fuel containing non‐petroleum‐derived kerosene can be produced from synthetic kerosene obtained through processes that include a hydroprocessing step. The potential use of non‐sulphided (reduced) nickel supported on alumina (Ni/Al2O3) was evaluated as an alternative to sulphided catalysts to saturate alkenes in sulphur‐free ...
Garima Chauhan, Felix Link, Cibele Melo Halmenschlager, Arno de Klerk   +3 more
wiley   +1 more source

A study of Ni‐Co/CeO2 catalyst derived from metal–organic framework for dry reforming of methane

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract The efficacy of cobalt‐doped, MOF‐derived catalysts for dry reforming of methane (DRM) was examined. The focus was on the influence of varying nickel and cobalt molar ratios on catalytic performance. Three catalysts with Ni:Co ratios of 1:1, 1:0.5, and 0.5:1, were synthesized and tested with cerium oxide as a constant support. The DRM reaction
Ruth D. Alli, Nader Mahinpey
wiley   +1 more source

A Review of Catalytic Combustion

Platinum Metals Review, 1984
openaire   +1 more source

Random forest regression for catalyst performance prediction and validation of tri‐reforming of methane (TRM)

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract Carbon dioxide‐reduced hydrogen can be synthesized through various methods such as dry‐reforming (DRM), steam reforming (SMR), and partial oxidation (POX). Tri‐reforming of methane (TRM) is a promising technology which combines all the above‐mentioned processes for the simultaneous production of hydrogen and syngas with high energy efficiency.
Paulo A. L. de Souza, Raja Muhammad Afzal, Felipe Gomes Camacho, Nader Mahinpey   +3 more
wiley   +1 more source