Results 1 to 10 of about 3,825 (70)
Effect of Fly Ash Belite Cement on Hydration Performance of Portland Cement
Fly ash belite cement is a green, low carbon cementitious material, mainly composed of hydraulic minerals of dicalcium silicate and calcium aluminate.
Yongfan Gong +3 more
doaj +1 more source
Calorimetric Study of High-Volume Fly Ash-Cement Paste Hydration at Different Temperatures
The study on the hydration process of cement-based materials is of significance since it determines the development of the macro-properties. The hydration process of high-volume fly ash (FA)-cement based materials is quite special and needs systematic ...
Senle Huang +6 more
doaj +1 more source
Modeling the Influence of Ground-Granulated Blast Furnace Slag on Hydration of Cement
Portland cement is usually substituted with granulated blast furnace slag to make a slag-blended cement. A slag-incorporating cement has a more complicated hydration process than Portland cement due to the interactions between the slag reaction and the ...
Andualem Yadeta +2 more
doaj +1 more source
Study on hydration process of red clay cement grout and micro-morphology of grout stone
In order to study the hydration process of red clay cement grout prepared by red clay in the southwest Wumeng mountain area in southwest China and the micro-morphology of the grout stone, the hydration heat characteristics of red clay cement grout were ...
HE Wen
doaj +1 more source
Study on the effect of activated coal gangue on the mechanical and hydration properties of cement
This study aims to minimize the carbon emissions of cement and investigate the viability of employing activated coal gangue (CG) as an additional cementitious ingredient.
Zewen Zhu +12 more
doaj +1 more source
Effect of C-S-H Nucleating Agent on Cement Hydration
This work aims to study the effect of a nucleating agent on cement hydration. Firstly, the C-S-H crystal nucleation early strength agent (CNA) is prepared.
Wenhao Zhao +3 more
doaj +1 more source
There is limited measure available to quantify the effect of polycarboxylate-ether based superplasticizer (PCE) on the microstructure of cement-based systems during the first 24 h.
Weiwei Zhu +4 more
doaj +1 more source
Phosphogypsum (PG) is a residue from the fertilizer industry used by Portland cement companies as a source of calcium sulfate to control the setting time during the hydration (or hardening process).
Rayara Pinto Costa +5 more
doaj +1 more source
The goal of this paper provides better understanding of the effect of sodium gluconate (SG) on ordinary Portland cement (OPC) hydration behavior. Pastes’ performances of ordinary Portland cement, including setting time at 20°C and 35°C curing temperature,
Xingdong Lv +7 more
doaj +1 more source
The present work studies the influence of water-cement ratio and types of mixing water on the hydration process and microstructure of calcium sulphoaluminate (CSA) cement. Experimental tests on the setting time, physical properties, compressive strength,
Chuanlin Wang, Meimei Song
doaj +1 more source

