Results 1 to 10 of about 208,282 (212)

Hydration characteristics, hydration products and microstructure of reactive powder concrete

open access: yesJournal of Building Engineering, 2023
Yes Reactive Powder Concrete (RPC) is a new type of cementitious materials with a complex hydration mechanism, and active admixtures greatly influence the hydration reaction, formation of hydration products, and evolution of microstructure. In order to comprehensively study the quantitative effects of active admixtures contents, namely silica fume ...
Chuanzhi Sun, Wenjie Ge
exaly   +3 more sources

Pozzolanic Reactivity and Hydration Products of Hedenbergite

open access: yesChemical Engineering Transactions, 2017
With hedenbergite, desulfurized gypsum and calcium hydroxide as the materials, this paper studies the pozzolanic reactivity of finely ground hedenbergite and performs XRD, IR, NMR and SEM analysis on the hydration products of the neat paste specimens ...
Biyao Geng   +7 more
doaj   +2 more sources

Tungsten mine waste geopolymeric binder: Preliminary hydration products investigations [PDF]

open access: yesConstruction and Building Materials, 2009
Geopolymeric mine waste mud (GMWM) binders are obtained from dehydroxylated waste powder mixed with minor quantities of calcium hydroxide, activated with NaOH and waterglass solutions.
F Pacheco-Torgal   +2 more
exaly   +2 more sources

A Scanning Transmission X-ray Microscopy Study of Cubic and Orthorhombic C₃A and Their Hydration Products in the Presence of Gypsum. [PDF]

open access: yesMaterials (Basel), 2016
This paper shows the microstructural differences and phase characterization of pure phases and hydrated products of the cubic and orthorhombic (Na-doped) polymorphs of tricalcium aluminate (C₃A), which are commonly found in traditional Portland cements ...
Rheinheimer V   +5 more
europepmc   +9 more sources

Effect of Citric Acid-Modified Chitosan on Hydration Regulation and Mechanism of Composite Cementitious Material System

open access: yesBuildings, 2023
The temperature stress caused by the large temperature difference is the main factor causing harmful cracks in large-volume concrete. The introduction of admixtures is beneficial to reduce the temperature difference inside and outside the large-volume ...
Liguo Wang   +8 more
doaj   +1 more source

Investigating the effect of polycarboxylate-ether based superplasticizer on the microstructure of cement paste during the setting process

open access: yesCase Studies in Construction Materials, 2022
There is limited measure available to quantify the effect of polycarboxylate-ether based superplasticizer (PCE) on the microstructure of cement-based systems during the first 24 h.
Weiwei Zhu   +4 more
doaj   +1 more source

DFT Study on the Compatibility Between Bentonite Clay Mineral and Hydration Products With the Polycarboxylate Water Reducer in the Cement Hydration Process

open access: yesFrontiers in Earth Science, 2022
As one of the most used grouting materials, cement has the characteristics of low price and a wide resource of raw material. With the in-depth research and application of cement admixture, the compatibility between different water-reducing agents and ...
Huang Teng   +7 more
doaj   +1 more source

Early hydration and liquid phase characteristics of solidified body of clinker-free superfine tailings

open access: yes工程科学学报, 2022
To investigate the early hydration and consolidation mechanism of superfine metal tailings powder in the CaO–CaSO4–H2O system, a clinker-free consolidation material based on iron tailings powder was prepared by superfine grinding lime, gypsum, and iron ...
Juan-hong LIU   +4 more
doaj   +1 more source

Study on hydration process of red clay cement grout and micro-morphology of grout stone

open access: yesMeikuang Anquan, 2023
In order to study the hydration process of red clay cement grout prepared by red clay in the southwest Wumeng mountain area in southwest China and the micro-morphology of the grout stone, the hydration heat characteristics of red clay cement grout were ...
HE Wen
doaj   +1 more source

1-Butyl-3-methylimidazolium tetrafluoroborate as suitable solvent for BF3: the case of alkyne hydration. Chemistry vs electrochemistry

open access: yesBeilstein Journal of Organic Chemistry, 2023
In order to replace the expensive metal/ligand catalysts and classic toxic and volatile solvents, commonly used for the hydration of alkynes, the hydration reaction of alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (
Marta David   +5 more
doaj   +1 more source

Home - About - Disclaimer - Privacy