Results 11 to 20 of about 4,103 (154)
A Study on the Bond–Slip Relationship of the CFRP–Steel Interface of CFRP Strengthened Steel
The bonding interface between the CFRP and the steel plate is the weak link of CFRP-strengthened steel structures. This paper studies the bond–slip relationship of the CFRP–steel interface by experiments and numerical tests. First, a series of double-strap experiments on a CFRP-strengthened steel plate are carried out. The results show that the maximum
Xinyan Guo +4 more
openaire +2 more sources
Activated Ductile CFRP NSMR Strengthening [PDF]
Significant strengthening of concrete structures can be obtained when using adhesively-bonded carbon fiber-reinforced polymer (CFRP) systems. Challenges related to such strengthening methods are; however, the brittle concrete delamination failure, reduced warning, and the consequent inefficient use of the CFRP.
Jacob Wittrup Schmidt +3 more
openaire +3 more sources
Reliability Analysis of CFRP-Strengthened RC Bridges Considering Size Effect of CFRP [PDF]
A reliability analysis of an existing structure and a carbon fiber-reinforced plastic (CFRP)-strengthened structure is commonly used to evaluate the effectiveness of strengthening. It also provides the basis for the calibration of the partial factors involved in strengthening design codes. As the fundamental data, the statistical characteristics of the
Xie, Hui-Bing, Wang, Yuan-Feng
openaire +2 more sources
Bio-Inspired Internal Stress Engineering for Microscale Surface Cracking in Sensitive Strain Sensors. [PDF]
This study presents a bio‐inspired internal stress engineering strategy to fabricate highly sensitive crack‐based strain sensors. By harnessing the internal expansion energy of microspheres and the thickness‐dependent brittle‐to‐ductile transition of ultrathin gold films, tunable microscale cracks are generated.
Jang JY, Cho H, Jung Y.
europepmc +2 more sources
Temperature Variations in Drilling of CFRP/Aluminum and CFRP/Titanium Stacks
This paper describes the temperature variations observed in the drilling of carbon fiber-reinforced plastic (CFRP)/Al, CFRP/Ti, Al/CFRP, and Ti/CFRP stacks. An infrared radiation pyrometer equipped with an optical fiber was used to measure the temperature.
Masahiko Sato 0003 +2 more
openaire +1 more source
To enhance through‐thickness conductivity without sacrificing impregnation, large spherical graphite particles are intentionally employed in a low‐viscosity resin. Unlike finer conductive fillers, these particles remain outside the fiber bundles and accumulate in resin‐rich interlaminar regions during molding.
Keito Hosoe +6 more
wiley +1 more source
Compressive Failure of Hybrid CFRP-CFRP Laminated Composites
The effect of hybridisation of HM and UHM carbon fibre laminates on strength and stiffness under compression was investigated through physical testing and analysis.
Mark Battley, MadeleineClements
openaire +2 more sources
Ultra‐Thin Tow‐Based Discontinuous Composites—Material Overview and Aspirations
Tow‐based discontinuous composites made from ultra‐thin tapes offer outstanding in‐plane mechanical properties. This material, inspired by Nacre, has high volume fraction of tapes exceeding 90 % and allows for quasi‐isotropic material plates less than 100 micrometer in thickness.
Ioannis Katsivalis +8 more
wiley +1 more source
This study investigates how the internal structure of fiber‐reinforced ceramic composites affects their resistance to damage. By combining 3D X‐ray imaging with acoustic emission monitoring during mechanical testing, it reveals how silicon distribution influences crack formation.
Yang Chen +7 more
wiley +1 more source
This study combines full‐field tomography with diffraction mapping to quantify radial (ε002$\varepsilon _{002}$) and axial (ε100$\varepsilon _{100}$) lattice strain in wrinkled carbon‐fiber specimens for the first time. Radial microstrain gradients (−14.5 µεMPa$\varepsilon \mathrm{MPa}$−1) are found to signal damage‐prone zones ahead of failure, which ...
Hoang Minh Luong +7 more
wiley +1 more source

