Results 111 to 120 of about 413,870 (296)

CHROMIUM BIOACCUMULATION FROM COMPOSTS AND VERMICOMPOSTS BASED ON TANNERY SLUDGES [PDF]

Journal of Central European Agriculture, 2008
Storage of waste substances is not indifferent to ecological equilibrium in the environment therefore should not be the ultimate way to limit waste arduousness. Therefore, the conducted investigations aimed to determine the effect of tannery composts and
Krzysztof GONDEK
doaj  

Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding

Advanced Engineering Materials, EarlyView.
This study investigates the tribological response of 60NiTi alloy under dry, water‐lubricated and high‐temperature conditions. The alloy exhibits decreasing wear volume and friction with increasing temperature due to the formation of protective oxide layers. The work clarifies dominant wear mechanisms and demonstrates the suitability of 60NiTi for high‐
Anthony Onyebuchi Okoani, Miguel Angel Selles, Maziar Ramezani   +2 more
wiley   +1 more source

Characterization of Nitinol Produced by Laser Powder Bed Fusion for Mechanical Metamaterial Applications

Advanced Engineering Materials, EarlyView.
Stabilization of L‐PBF Ni50.7Ti49.3 under low‐cycle loading was investigated. Recoverable strain after cycling was dependent on the amount of applied load. Recovery ratio was 53.4% and 35.1% at intermediate and high load, respectively. The maximum total strain reached 10.3% at a high load of 1200 MPa.
Ondřej Červinek, Jakub Hurník, Miroslav Šmíd, Ondřej Zobač, Melanie Todt, Daniel Koutný   +5 more
wiley   +1 more source

EBSD Study of Creep‐Induced Lattice Misorientation in MgO‐Particle‐Reinforced Austenitic Steel Composites

Advanced Engineering Materials, EarlyView.
Creep experiments at 900°C on coarse‐grained steel‐ceramic composites containing recycled magnesia reveal that higher ceramic volume fractions significantly enhance the creep resistance. Detailed EBSD investigations identify subgrain formation in the steel matrix as the dominant deformation mechanism.
Moritz Müller, Amaya Compart, Mahnaz Mehdizadehlima, Serhii Yaroshevskyi, Christos G. Aneziris, Horst Biermann, Anja Weidner   +6 more
wiley   +1 more source

Development of dispersion strengthened chromium alloys Summary report [PDF]

Dispersion strengthened chromium alloys with minimal quantities of interstitial ...
Abrams, E. F., Alexander, J. A., Shaver, R. G., Withers, J. C.   +3 more
core   +1 more source

Reduction of Oxide Inclusions During the High‐Frequency Welding of Steel via a Nonthermal Ar/H2 Plasma Jet

Advanced Engineering Materials, EarlyView.
High‐frequency (HF) welding of steel is limited by oxide inclusions that degrade weld quality. This study demonstrates, for the first time, the integration of a nonthermal Ar/H2 dielectric barrier discharge (DBD) plasma jet into HF welding. Local plasma treatment provides effective shielding and in‐situ oxide reduction, resulting in markedly fewer and ...
Viktor Udachin, Lienhard Wegewitz, René Gustus, Henning Wiche, Wolfgang Maus‐Friedrichs   +4 more
wiley   +1 more source

Qualidade da carne de frangos de corte submetidos a dietas suplementadas com crômio, criados em diferentes temperaturas ambientais = Meat quality of broiler chicks submeted the supplemented diets with chromium and reared in differents enviromental temperatures

Acta Scientiarum: Animal Sciences, 2007
Foram realizados dois experimentos. O experimento um objetivou avaliar a composição da carne do peito de frangos alimentados com dietas suplementadas com crômio (0, 400, 800 e 1.200 μg Cr kg-1) complexado a levedura, criados sob diferentes condições de ...
Alexandre Oba, Pedro Alves de Souza, Hirasilva Borba Alves de Souza, Fábio Roberto Leonel, Elisabete Regina Leone Pelicano, Nívea Maria Brancaci Zeoula, Isabel Cristina Bolelli   +6 more
doaj  

Nanoindentation Criteria for Combinatorial Thin Film Libraries

Advanced Engineering Materials, EarlyView.
Thin‐film material libraries are compositional spreads used for screening composition‐structure‐property relationships. Nanoindentation is often used to characterize mechanical behavior across these systems, however variations in methodology are widespread.
Andre Bohn, Adie Alwen, Andrea M. Hodge
wiley   +1 more source

Application of Raman and Photoluminescence Spectroscopy to MgO‐C Refractories

Advanced Engineering Materials, EarlyView.
Visible to near infrared luminescence of MgO is studied on MgO‐C bricks and nominally pure MgO powder, with focus on two similar sharp high‐intensity signals, at 699 and 871 nm, each surrounded by symmetrical sidebands. The nature of these sidebands is investigated by temperature‐dependent spectroscopic measurements, confirming phonon involvement by ...
Julia Richter, Felix Drechsler, Till M. J. Stadtmüller, Cameliu Himcinschi, Christos G. Aneziris, Jens Kortus   +5 more
wiley   +1 more source

REMEDIACIÓN DE UN SUELO DE LA CUENCA ALTA DEL RÍO BOGOTÁ CONTAMINADO CON LOS METALES PESADOS CADMIO Y CROMO REMEDIATION OF A SOIL CONTAMINATED WITH THE HEAVY METALS CADMIUM AND CROMIUM ON THE HIGH BASIN OF THE BOGOTA RIVER

Revista U.D.C.A Actualidad & Divulgación Científica, 2010
Suelos contaminados con metales pesados tóxicos, como cadmio y cromo, originan riesgo para los animales y para los humanos, que consumen productos, que en ellos se producen.
Rodrigo Lora Silva, Helver Bonilla Gutiérrez   +1 more
doaj