Results 1 to 10 of about 5,063 (169)
Punching Shear Capacity of Recycled Aggregate Concrete Slabs
Buildings, 2022 This article investigates the punching shear behavior of recycled aggregate concrete (RAC) two-way slabs. Ten 1500 mm × 1500 mm × 100 mm slabs were tested monotonically.
Satjapan Leelatanon +4 more
doaj +3 more sources
Flexural behaviour of basalt fibred concrete slabs made with basalt fibre reinforced polymer rebars [PDF]
E3S Web of Conferences, 2021 In this paper, the flexural behaviour of M30 grade basalt fibred concrete slabs made with basalt fibre reinforced polymer rebars are studied and compared with slabs made with steel rebars.
Hasham Md +3 more
doaj +1 more source
The crack formation of concrete slabs embedded along two sides with minimum area of steel reinforcement [PDF]
MATEC Web of Conferences, 2020 The article deals with crack formation of concrete slabs embedded along two sides, after monitoring the shrinking of concrete slabs under laboratory conditions.
Priganc Sergej
doaj +1 more source
EXPERIMENTAL AND ANALYTICAL STUDY ON THE IMPACT BEHAVIOR OF STEEL–CONCRETE COMPOSITE SLAB [PDF]
e-GFOS, 2021 Concrete structures have been widely used for many years to resist impact loads. Steel–concrete composite structures may be considered efficient structures in the emerging modern construction field. Hence, the main objective of this research was to study
P Sangeetha +3 more
doaj +1 more source
Case Studies in Construction Materials, 2022 While very little is known about the punching shear behavior of Fiber Reinforced Polymer (FRP)-reinforced concrete slabs; thus, very few design codes for this case are available. Most available design codes and guidelines are missing the physical meaning
A. Deifalla
doaj +1 more source
Buildings, 2023 Static calculations of experimental models in an elastic formulation were carried out, and the regularities connecting the dependences of forces in the calculated cross-section of punching out from the main structural parameters of contacting elements ...
Tatiana Matseevich
doaj +1 more source
Case Studies in Construction Materials, 2020 Concrete mixing in laboratory conditions has a high level of quality control enabling it to achieve the designed workability and strength by accurately controlling the material quantity, mixing sequence, and mixing time.
Ou Yi +5 more
doaj +1 more source
Reinforcing Concrete Slabs Using Cellulose Fiber
Guan'gai paishui xuebao, 2023 【Objective】 Cellulose fiber is a material increasingly used to reinforce concrete and this paper investigates its improvement of concrete slabs against cracking. 【Method】 Concrete slabs made by cement mixed with fly ash, cement mixed with fly ash and MgO,
CHEN Xiaopan +6 more
doaj +1 more source
Strengthening Klein’s floor slabs with the use of current norms
Budownictwo i Architektura, 2015 The paper presents the effectivity of using the steel-concrete floor slabs in existing buildings. Steel-concrete slabs described in this paper consist of old steel beams which are main structural members of the floor slabs and reinforced concrete slabs ...
Marcin Górecki +1 more
doaj +1 more source
Acta Polytechnica, 2019 This article presents the results of an experimental research of sandwich reinforced concrete-foamed concrete floor slabs. These floor slabs combine three different materials — normal concrete, foamed concrete and a steel reinforcement.
Oksana Lytvyniak, Myroslava Tashak
doaj +1 more source