Results 141 to 150 of about 820,423 (294)
Fretting Wear and Corrosion Behavior of the Fe‐35Mn Biodegradable Alloy for Biomedical Applications
This study evaluates the corrosion and tribological wear behavior of the Fe‐35Mn alloy, demonstrating superior mechanical stability and a more favorable degradation rate than pure iron, thereby highlighting its potential for biomedical applications. ABSTRACT The biodegradable Fe‐35Mn alloy has emerged as a promising material for temporary implants due ...
Kerolene Barboza da Silva +7 more
wiley +1 more source
Prediction of the properties of sintered copper-graphite composites using response surface methodology. [PDF]
Ankit +8 more
europepmc +1 more source
Hydrogen‐enhanced SCC of WAAM Inconel 625 in 3.5 wt.% NaCl solution. Hydrogen charging reduces passive film stability (lower corrosion potential) and promotes pitting at Laves phase/matrix interfaces. Stress corrosion cracks propagate along Laves‐rich regions, leading to quasi‐cleavage brittle fracture.
Xu Zhang +5 more
wiley +1 more source
Corrosion Analysis of Rapidly Solidified and Subsequently Aged Al‐Ni and Al‐Fe‐Ni Alloys
Fe addition modifies intermetallic phase chemistry and microgalvanic interactions in Al‐Ni alloys, shifting corrosion from generalized dissolution to localized attack. ABSTRACT This study investigates the influence of Fe addition and heat treatment on the corrosion behavior of Al–5 wt.%Ni and Al–2 wt.%Fe–1.5 wt.%Ni alloys, with particular emphasis on ...
Jaderson Rodrigo da Silva Leal +4 more
wiley +1 more source
Integrating Powder Metallurgy with Explosive Cladding: A Novel Route for Bimetallic Copper-Steel Tube Fabrication. [PDF]
Błoniarz R +3 more
europepmc +1 more source
Copper is exposed to anoxic hydrogen sulfide gas addressing a knowledge gap in the literature, and the corrosion products are characterized using electron microscopy. The results are compared with existing models for corrosion, and new theories are proposed.
Benjamin D. C. Hackett +6 more
wiley +1 more source
Thirty-second Joule-heating synthesis of Cu-intercalated Mo<sub>6</sub>S<sub>8</sub> Chevrel phases with pH-symmetric hydrogen evolution behavior. [PDF]
Jiang Z +8 more
europepmc +1 more source
Overlap percentage governs the remelting, dilution, and solidification behavior of CMT‐WAAM AISI 308L stainless steel. Increasing overlap to 50% promotes stronger bead‐to‐bead bonding, wider transition zones, and localized hardness enhancement, with the highest hardness observed in the overlap region due to grain refinement and δ‐ferrite redistribution.
Mojtaba Karamimoghadam +4 more
wiley +1 more source

