Results 101 to 110 of about 126,344 (318)
Flexible liners for corrosion protection of pipelines [PDF]
, 2012 Flexible plastic liners are sometimes installed into new and existing oil and gas pipelines to prevent corrosion of the pipe wall. A practical difficulty of this method is that the plastic liners are permeable to gases, which can collect and form an ...
Allison, Crispin
core
, 2010 Erosion-corrosion of materials in aqueous environments is a complex phenomenon involving a very large number of variables. In such cases, characteristics of the target, particle and the environment affect the degradation mechanism.
Abdelrahman, S.M. +4 more
core +1 more source
A multiscale constitutive model for intergranular stress corrosion cracking in type 304 austenitic stainless steel [PDF]
, 2013 Intergranular stress corrosion cracking (IGSCC) is a fracture mechanism in sensitised austenitic stainless steels exposed to critical environments where the intergranular cracks extends along the network of connected susceptible grain boundaries.
Rahimi, S +4 more
core +1 more source
Soft Mechanical‐Electrical Logic Using Liquid Metal‐Filled 3D‐Printed Architectures
Advanced Engineering Materials, EarlyView.We present 3D‐printed soft mechanical–electrical logic elements that use liquid metal–filled silicone tubes actuated by thermoplastic polyurethane/polylactic acid (TPU/PLA) architectures to produce Boolean operations. Complementary normally open and normally closed unit cells perform repeatable binary transitions and can be combined into more complex ...
Christoph Lehmann +2 more
wiley +1 more source
Study on the Wear Resistance and Corrosion Resistance of Ni-Based WC Coatings on Wind Turbine Blades Prepared by Flame Spray Welding [PDF]
Cailiao BaohuWind turbine blades of coal-fired thermal power plants are not only subject to erosion from SOx and NOx due to incomplete desulfurization and denitrification during service， but also face corrosion from coastal salt spray.In addition， in ...
WANG Xudong, ZHOU Youlong, CHEN Haoyu, LIU Jiawen, LIU Yu
doaj +1 more source
CORROSION BEHAVIOUR OF THE AZ31 MAGNESIUM ALLOY AND SURFACE TREATMENTS FOR ITS CORROSION PROTECTION
, 2009 Nowadays environmental conservation forces the transportation industry to manufacture lighter and low emissions transport vehicles. In this contest, magnesium alloys have found increasing attention by the automotive industry because of their low density ...
Zanotto, Federica
core
Enhanced Strength and Corrosion Resistance of Ti‐13Nb‐12Ta‐10Zr‐4Sn Alloy by Aging Treatment
Advanced Engineering Materials, EarlyView.This work systematically investigates the effect of aging treatment on mechanical properties and corrosion behavior of vacuum arc‐melted Ti‐13Nb‐12Ta‐10Zr‐4Sn alloy. Owing to the increased α″ martensite, strength and corrosion resistance were significantly enhanced by aging treatment.
Yuhua Li +5 more
wiley +1 more source
Corrosion resistance of Cu-Fe deformation processed in situ alloy in chloride ion environment
Electrochemistry CommunicationsTo assess the corrosion resistance of Cu-Fe deformation in situ alloys in a chloride ion environment, Cu-Fe alloys with varying Fe contents (5 wt%, 10 wt%, and 14 wt%) were prepared using vacuum induction melting, and the impact of Fe content on the ...
Lin Xu +6 more
doaj +1 more source
Tuning the Corrosion Behavior of Rapidly Solidified and Thermally-annealed Fe-Ti-Pd Alloys
, 2014 The corrosion behavior of rapidly solidified Fe(91-x)Ti9Pdx (x=0, 1, 3 5) alloys (wt. %), both in the as-cast and thermally annealed (i.e., slowly cooled) states, has been investigated by means of electrochemical potentiodynamic polarization and ...
Sort, Jordi, Gonzalez Sanchez, Sergio
core
Advanced Engineering Materials, EarlyView.Graphene nanoplatelet (0.1 wt.%) reinforcement significantly enhances the performance of β Ti‐28Nb‐35.4Zr alloy. Grain refinement, reduced water contact angle, and improved surface characteristics promote osteoblast adhesion and complete surface coverage after 7 days.
Khurram Munir +5 more
wiley +1 more source