Results 81 to 90 of about 731,464 (195)

基于CTAC改性活性炭的信封式膜包用于水溶液中六价铬去除

open access: yes, 2020
以阳离子表面活性剂十六烷基三甲基氯化铵(CTAC)改性粉末椰壳活性炭为载体制备了聚丙烯信封式膜包,用于水溶液中六价铬(Cr(Ⅵ))的吸附去除.对CTAC改性活性炭进行了扫描电镜和红外光谱表征,研究了膜包对水溶液中Cr(Ⅵ)的吸附去除性能.系统考察了改性活性炭的投加量、微孔滤膜的孔径、溶液pH值、吸附温度和吸附时间等因素对吸附效果的影响.实验结果表明,将50 mg改性活性炭包覆在孔径为3.0 μm的膜内制成信封式膜包,在25 ℃条件下对pH值为2的Cr(Ⅵ)溶液吸附3 h,去除效率高于99.0%.室温下 ...
鹿文慧   +5 more
core  

Thermomechanical Fatigue and Creep–Fatigue Interaction of Inconel 718 Additively Manufactured by Laser Beam Powder Bed Fusion

open access: yesAdvanced Engineering Materials, EarlyView.
Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth   +6 more
wiley   +1 more source

Affecting the Properties of Copper–Graphene Electroconductive Composite by Severe Plastic Deformation

open access: yesAdvanced Engineering Materials, EarlyView.
Copper‐based composites enhanced with carbon feature convenient mechanical properties and favorable electric conductivity. Processing via deformation and thermomechanical treatments can introduce advantageous microstructures further enhancing their performance. Herein, copper–graphene powder‐based composites are directly consolidated via rotary swaging
Radim Kocich   +3 more
wiley   +1 more source

氨基功能化超顺磁性PGMA高分子微球去除废水中的铬(Ⅵ)

open access: yes, 2011
通过渗透沉积过程合成单分散的磁性聚甲基丙烯酸缩水甘油酯(PGMA-NH2)高分子微球,对其进行了SEM,FT-IR,XRD表征.并着重研究了磁性PGMA-NH2高分子微球对Cr(Ⅵ)的吸附性能及吸附机理.结果表明,此磁性高分子微球对Cr(Ⅵ)有较高的吸附量,等温吸附数据符合Langmuir模型,在温度298.15K,pH=4.5时,吸附剂的饱和吸附容量为263.16mg/g.吸附量与废水中Cr(Ⅵ)的离子形式有关,pH=1.5时吸附效果最好,在15min内达到平衡.吸附以离子交换与静电引力为主,自发进行,
孔鹏   +7 more
core  

CR submanifolds in Kaehler and nearly Kaehler manifolds [PDF]

open access: yes, 2004
A review of the study of CR, submanifolds within Kaehler and nearly Kaehler manifolds, and the properties of such manifolds with respect submanifold theory in differential geometry.
Gregg, Matthew Thomas
core  

Electrochemical Behavior of Flame‐Sprayed Sc‐Doped AlCoCrFeMo High‐Entropy Alloy Coatings in 3.5% Sodium Chloride Solution

open access: yesAdvanced Engineering Materials, EarlyView.
Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar   +7 more
wiley   +1 more source

Influence of Scan Strategies in Electron Beam Powder Bed Fusion on Solidification, Microstructure, and High‐Temperature Compressive Properties of γ′‐Strengthened Inconel 738LC

open access: yesAdvanced Engineering Materials, EarlyView.
Experiments and thermophysical simulations were conducted to investigate the electron beam powder bed fusion electron beam (PBF‐EB/M) process for the γ′‐strengthened nickel‐based superalloy Inconel 738LC. The results demonstrate the impact of process‐induced microstructural variations on high‐temperature mechanical behavior, providing a basis for ...
Jan Niklas Petenati   +11 more
wiley   +1 more source

ws-cr

open access: yes, 2018
DIHARD track1 ws-cr system (no R)
ZCU-NTIS (4926931)   +2 more
core   +1 more source

Impact of MgO Additions on the Oxidation Resistance and Compression Behavior of Vanadium Alloys

open access: yesAdvanced Engineering Materials, EarlyView.
An increase in oxidation resistance at 600 °C is achieved for alloys containing more than 2.5 wt.% MgO. It has been established that, along with V2O5, MgO6V2, and Mg2O7V2 are formed, which are presumed to enhance oxidative stability. Furthermore, the possible transformation of Mg‐vanadates through reaction with CO2, which presumably occurs in this ...
Ievgen Solodkyi   +5 more
wiley   +1 more source

Study on Synthesis of m-phenoxy Benzoic Acid by Electrolysis Oxidation Method

open access: yes, 2005
以Nafion417作隔膜,Pb-PbO2作阳极,Pb作阴极,电解氧化Cr(Ⅲ)为Cr(Ⅵ),然后以Cr(Ⅵ)为氧化媒质,氧化间甲基二苯醚为间苯氧基苯甲酸.研究了在Nafion417隔膜槽中影响Cr(Ⅲ)电氧化的因素,并进一步探究优化电合成间苯氧基苯甲酸的工艺条件.The m-phenoxy benzoic acid was synthesized by oxidation m-phenoxy toluene using Cr(Ⅵ)as oxidation media, which was ...
XU Wei   +3 more
core  

Home - About - Disclaimer - Privacy