Results 21 to 30 of about 2,817 (257)
3D thickness effects around notch and crack tip stress/strain fields [PDF]
Fracture and Structural Integrity, 2015 Notches and cracks are usually approximately modeled as two-dimensional problems using solutions from plane elasticity to quantify localized stress/strain concentration effects around their tips. However, they may be associated with high gradients that
R.C.O. Góes +2 more
doaj +3 more sources
The effect of creep damage model formulation on crack path prediction
Fracture and Structural Integrity, 2019 The stress, strain rate and process zone with respect to the creep-crack growth are analyzed by employing damage-evolution equations. The damage models for the fracture of the process zone are represented using a stress and ductility based formulation ...
Valery Shlyannikov, Andrey Tumanov
doaj +3 more sources
On non-singular GRADELA crack fields
Theoretical and Applied Mechanics Letters, 2014 A brief account is provided on crack-tip solutions that have recently been published in the literature by employing the so-called GRADELA model and its variants.
Elias C. Aifantis
doaj +1 more source
Degradation mechanism of the von Willebrand factor A2 domain by nattokinase
FEBS Letters, EarlyView.Nattokinase, a natto‐derived protease, exhibits potent antithrombotic effects. This study demonstrates that nattokinase directly cleaves the von Willebrand factor (vWF) A2 domain in vitro. Unlike the native regulator ADAMTS13, nattokinase degrades folded vWF independently of shear stress.
Ryuichi Hyakumoto +3 more
wiley +1 more source
Optimizing photoactivation of PA‐mCherry for optical pooled CRISPR screens
FEBS Open Bio, EarlyView.Photoactivatable PA‐mCherry finds widespread use to optically tag individual cells. However, confocal 405 nm UV laser‐scanning (normal scan) is much less efficient than widefield UV illumination, limiting the use of PA‐mCherry on confocal instruments. We remedy this limitation by reporting that rapid and repeated confocal scanning with a low‐intensity,
Sravasti Mukherjee +3 more
wiley +1 more source
Strain Analysis of Surface Cracked Thin Flat Plate under Cycling Impact Loading Effect
Journal of Engineering, 2015 In this work, strains and dynamic crack growth were studied and analyzed in thin flat plate with a surface crack at the center, subjected to cycling low velocity impact loading for two types of aluminum plates (2024, 6061).
Fathi Abdulsahib Alshamma, Ass. Prof. Dr. +1 more
doaj +2 more sources
A Workflow to Accelerate Microstructure‐Sensitive Fatigue Life Predictions
Advanced Engineering Materials, EarlyView.This study introduces a workflow to accelerate predictions of microstructure‐sensitive fatigue life. Results from frameworks with varying levels of simplification are benchmarked against published reference results. The analysis reveals a trade‐off between accuracy and model complexity, offering researchers a practical guide for selecting the optimal ...
Luca Loiodice +2 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.Mg–Zn composites with a thickness of 0.21 mm were fabricated using roll bonding of a kirigami‐patterned Mg alloy inlay within a Zn matrix. Thermal activation following this process led to the formation of tailored intermetallic structures, which provided the composite with enhanced flexural strength.
Yaroslav Frolov +4 more
wiley +1 more source
International Journal of Concrete Structures and Materials, 2017 An experimental evaluation of crack propagation and post-cracking behavior in steel fiber reinforced concrete (SFRC) beams, using full-field displacements obtained from the digital image correlation technique is presented.
Sahith Gali, Kolluru V. L. Subramaniam
doaj +1 more source
Phase Field Failure Modeling: Brittle‐Ductile Dual‐Phase Microstructures under Compressive Loading
Advanced Engineering Materials, EarlyView.The approach by Amor and the approach by Miehe and Zhang for asymmetric damage behavior in the phase field method for fracture are compared regarding their fitness for microcrack‐based failure modeling. The comparison is performed for the case of a dual‐phase microstructure with a brittle and a ductile constituent.
Jakob Huber, Jan Torgersen, Ewald Werner
wiley +1 more source