Results 81 to 90 of about 1,068,196 (288)
Binder‐free laser powder bed fusion of 8YSZ with a femtosecond laser is used to map process windows linking scan strategy, heat accumulation, and grain growth. Time‐resolved thermography and simulations reveal thermal regimes that enable continuous, vitrified, and fine‐grained 8YSZ surface layers without absorptive additives and demonstrate ...
Markus Kühn +5 more
wiley +1 more source
HEA interlayers offer a versatile route for joining high‐performance structural materials. Their compositional and structural design regulates interfacial reactions, suppresses brittle IMCs, and improves metallurgical bonding. Sandwich interlayers further integrate defect healing with precipitation strengthening, enabling improved strength–ductility ...
Lin Yuan +4 more
wiley +1 more source
Crack propagation behavior of laser-MIG hybrid welded joints in 6005 aluminum alloy
The fatigue crack propagation behavior of laser-MIG hybrid welded joints in 6005A-T6 aluminum alloy is studied. Digital image correlation (DIC) technology is employed to capture the local displacement field near the crack tip during testing, enabling a ...
Ke LYU +5 more
doaj +1 more source
A Novel Approach to Estimate the Transition Temperature via Dynamic Nanoindentation
A new dynamic nanoindentation‐based method was developed that uses the stiffness ratio as an indicator of the elastic–plastic deformation contributions at different temperatures. The approach successfully identified transition temperatures in ferritic steel and distinguished them from continuously ductile austenitic steel.
Stefan Zeiler +4 more
wiley +1 more source
Near‐surface deuterium enrichment profiles for different microstructural types of TiAl after exposure at 700 °C in a heavy water‐containing environment. The deuterium levels are significantly higher than expected from natural occurrence, indicating that the heavy water dissociated during the exposure treatment and entered the specimens.
Jonathan D. H. Paul +5 more
wiley +1 more source
To enhance through‐thickness conductivity without sacrificing impregnation, large spherical graphite particles are intentionally employed in a low‐viscosity resin. Unlike finer conductive fillers, these particles remain outside the fiber bundles and accumulate in resin‐rich interlaminar regions during molding.
Keito Hosoe +6 more
wiley +1 more source
Edge crack growth of mortar plate specimens under uniaxial loading tests
In this paper, a compression-to-tension conversion technique is developed by applying predominant mode I loading test, using a servo-controlled compression system. The technique is applied to thin mortar plate specimens of different widths that include a
Zhenghong Huang +3 more
doaj +1 more source
Interaction of Multiple Cracks on Crack Propagation.
There is interaction among multiple cracks which are initiated in a plane surface by fatigue or environmentally assisted cracking. And it is observed that these cracks may coalesce as they approach each other. In this study, the interaction of multiple cracks with different relative locations and lengths was evaluated using a finite element method ...
openaire +2 more sources
Additive manufacturing introduces pronounced microstructural and crystallographic anisotropy in Ni‐based superalloys, resulting in orientation‐dependent creep deformation and damage. This review identifies the key microstructural origins of creep anisotropy, examines their influence on dominant deformation mechanisms, and highlights processing ...
Chandan Kumar +3 more
wiley +1 more source
To overcome the limitation of constant Poisson’s ratio in bond-based peridynamics, an ordinary state-based peridynamic (OSB PD) model was applied to simulate dynamic crack propagation in Kalthoff–Winkler specimen subjected to a low velocity impact.
JS Guo, WC Gao
doaj +1 more source

