Results 1 to 10 of about 2,495 (182)
Using 3D Digital Image Correlation (3D-DIC) to Measure CTOD in a Semi-Elliptical Surface Crack [PDF]
Proceedings, 2018 The subsurface nature of Crack Tip Opening Displacement (CTOD) makes its direct measurement very difficult, if not impossible. During fracture toughness testing, CTOD is commonly calculated by applying a plastic hinge model using externally applied clip ...
Kaveh Samadian +2 more
doaj +3 more sources
Effects of Mo addition on crack tip opening displacement (CTOD) in heat affected zones (HAZs) of high-strength low-alloy (HSLA) steels. [PDF]
Sci Rep, 2019 AbstractEffects of Mo addition on microstructures and crack tip opening displacement (CTOD) in heat affected zones (HAZs) of three high-strength low-alloy (HSLA) steels were investigated in this study, and the correlation between them was explained by fracture mechanisms related with martensite-austenite constituent (MA) characteristics.
Lee SG, Kim B, Kim WG, Um KK, Lee S.
europepmc +4 more sources
Investigation of fracture properties of mode I fracture in heat-treated granite [PDF]
Scientific ReportsThe mode I fracture properties of granite under high-temperature conditions were investigated to reveal the influence of different heat treatment temperatures on the fracture toughness, crack propagation behavior, and brittle-ductile transition of ...
Shaoqing Niu +3 more
doaj +2 more sources
Experimental evaluation of CTOD in constant amplitude fatigue crack growth from crack tip displacement fields [PDF]
Fracture and Structural Integrity, 2017 In the current work an experimental study of the crack tip opening displacement (CTOD) is performed to evaluate the ability of this parameter to characterise fatigue crack growth.
J.M. Vasco-Olmo +3 more
doaj +3 more sources
Metals, 2023 The fatigue crack growth-rate test of rail head, waist, and bottom material for U71Mn welded rail was carried out. Digital image correlation (DIC) was used to capture the full-field displacement.
Xiu-Yang Fang +4 more
doaj +1 more source
Effect of numerical parameters on plastic CTOD [PDF]
Fracture and Structural Integrity, 2017 Fatigue crack growth (FCG) is associated with irreversible and non-linear processes happening at the crack tip. This explains different problems observed in the use of da/dN-?K curves, namely the inability to explain stress ratio and load history effects.
F.V. Antunes +3 more
doaj +2 more sources
Medžiagotyra, 2022 This paper deals with the effect of initial crack tip shape, plastic compressibility, and strain softening on near-tip stress-strain fields for a mode I crack subjected to fatigue loading under plane strain and small scale yielding. A finite strain-based
Md Intaf ALAM +3 more
doaj +1 more source
Fracture and Structural Integrity, 2019 The current work presents an experimental study on the use of the crack tip opening displacement (CTOD) to evaluate its ability to characterise fatigue crack growth.
J.M. Vasco-Olmo +3 more
doaj +3 more sources
Metals, 2023 In this study, the effect of finish rolling temperature on the critical crack tip opening displacement (CTOD) of typical 500 MPa grade weathering steel was elucidated. The microstructures were observed via optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), and electron back-scattered diffraction (EBSD).
Junping Wu +6 more
openaire +2 more sources
Materials & Design, 2020 In this paper, the parameters of fatigue crack growth rate for Q355J2 steel exposed to air and seawater were presented using the “Paris' law” based on the stress intensity factor (SIF), J-integral, crack tip opening displacement (CTOD) and crack tip ...
Haohui Xin, Milan Veljkovic
doaj +1 more source